diff options
| author | Christian Gmeiner | 2014-11-10 14:35:48 +0100 |
|---|---|---|
| committer | Stefano Babic | 2014-11-13 16:22:26 +0100 |
| commit | 39c7d5a222c50b6bb0618aa07d9951e730e6ff4b (patch) | |
| tree | 422f8030ef1558eefc32c92f9e1b36ed4fec4d3a /board/freescale | |
| parent | f4a7bf5a3792bdf238f376f7fa70a030c2fd8d92 (diff) | |
ot1200: add support for EHCI
U-Boot 2014.10-17457-g0b23780-dirty (Nov 10 2014 - 11:41:04)
CPU: Freescale i.MX6D rev1.2 at 792 MHz
Reset cause: WDOG
Board: ot1200
I2C: ready
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB
In: serial
Out: serial
Err: serial
Net: using phy at 0
FEC [PRIME]
Hit any key to stop autoboot: 0
=> usb start
(Re)start USB...
USB0: Port not available.
USB1: USB EHCI 1.00
scanning bus 1 for devices... 4 USB Device(s) found
=> usb tree
USB device tree:
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Hub (480 Mb/s, 2mA)
|
+-3 Mass Storage (480 Mb/s, 80mA)
| USBest Technology USB Mass Storage Device 0000000000028B
|
+-4 Vendor specific (480 Mb/s, 2mA)
=>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Diffstat (limited to 'board/freescale')
0 files changed, 0 insertions, 0 deletions