powerpc/T104xD4RDB: Add T104xD4RDB boards support

T1040D4RDB is a Freescale reference board that hosts the T1040 SoC.
    T1040D4RDB is re-designed T1040RDB board with following changes :
    - Support of DDR4 memory
    - Support of 0x66 serdes protocol which can support following interfaces
        - 2 RGMII's on DTSEC4, DTSEC5
        - 1 SGMII on DTSEC3
    - Support of QE-TDM

    Similarily T1042D4RDB is a Freescale reference board that hosts the T1040
    SoC. T1042D4RDB is re-designed T1042RDB board with following changes :
    - Support of DDR4 memory
    - Support for 0x86 serdes protocol which can support following interfaces
        - 2 RGMII's on DTSEC4, DTSEC5
        - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3
    - Support of DIU

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

10 files changed, 184 insertions, 6 deletions

diff --git a/board/freescale/t104xrdb/MAINTAINERS b/board/freescale/t104xrdb/MAINTAINERS
index 13d9be9da8f..32e044ff8f0 100644
--- a/board/freescale/t104xrdb/MAINTAINERS
+++ b/board/freescale/t104xrdb/MAINTAINERS
@@ -6,7 +6,13 @@ F:	include/configs/T104xRDB.h
 F:	configs/T1040RDB_defconfig
 F:	configs/T1040RDB_NAND_defconfig
 F:	configs/T1040RDB_SPIFLASH_defconfig
+F:	configs/T1040D4RDB_defconfig
+F:	configs/T1040D4RDB_NAND_defconfig
+F:	configs/T1040D4RDB_SPIFLASH_defconfig
 F:	configs/T1042RDB_defconfig
+F:	configs/T1042D4RDB_defconfig
+F:	configs/T1042D4RDB_NAND_defconfig
+F:	configs/T1042D4RDB_SPIFLASH_defconfig
 F:	configs/T1042RDB_PI_defconfig
 F:	configs/T1042RDB_PI_NAND_defconfig
 F:	configs/T1042RDB_PI_SPIFLASH_defconfig
@@ -15,6 +21,8 @@ T1040RDB_SDCARD BOARD
 #M:	-
 S:	Maintained
 F:	configs/T1040RDB_SDCARD_defconfig
+F:	configs/T1040D4RDB_SDCARD_defconfig
+F:	configs/T1042D4RDB_SDCARD_defconfig
 F:	configs/T1042RDB_PI_SDCARD_defconfig
 
 T1040RDB_SECURE_BOOT BOARD
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index ac95b5e5094..b9d22120006 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -12,6 +12,17 @@ The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC.
 (a personality of T1040 SoC). The board is similar to T1040RDB but is
 designed specially with low power features targeted for Printing Image Market.
 
+The T1040D4RDB is a Freescale reference board that hosts the T1040 SoC.
+The board is re-designed T1040RDB board with following changes :
+    - Support of DDR4 memory and some enhancements
+
+The T1042D4RDB is a Freescale reference board that hosts the T1042 SoC.
+The board is re-designed T1040RDB board with following changes :
+    - Support of DDR4 memory
+    - Support for 0x86 serdes protocol which can support following interfaces
+        - 2 RGMII's on DTSEC4, DTSEC5
+        - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3
+
 Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB
 -------------------------------------------------------------------------
 Board		Si		Protocol		Targeted Market
@@ -19,6 +30,8 @@ Board		Si		Protocol		Targeted Market
 T1040RDB	T1040		0x66                    Networking
 T1040RDB	T1042		0x86                    Networking
 T1042RDB_PI	T1042		0x06                    Printing & Imaging
+T1040D4RDB	T1040		0x66                    Networking
+T1042D4RDB	T1042		0x86                    Networking
 
 
 T1040 SoC Overview
@@ -70,7 +83,6 @@ The T1040/T1042 SoC includes the following function and features:
 
 T1040 SoC Personalities
 -------------------------
-
 T1022 Personality:
 T1022 is a reduced personality of T1040 with less core/clusters.
 
@@ -268,8 +280,13 @@ SPI Flash memory Map on T104xRDB
 Please note QE Firmware is only valid for T1040RDB
 
 
-Switch Settings: (ON is 0, OFF is 1)
-===============
+Switch Settings for T104xRDB boards: (ON is 0, OFF is 1)
+==========================================================
+NOR boot SW setting:
+SW1: 00010011
+SW2: 10111011
+SW3: 11100001
+
 NAND boot SW setting:
 SW1: 10001000
 SW2: 00111011
@@ -284,3 +301,67 @@ SD boot SW setting:
 SW1: 00100000
 SW2: 00111011
 SW3: 11100001
+
+Switch Settings for T104xD4RDB boards: (ON is 0, OFF is 1)
+=============================================================
+NOR boot SW setting:
+SW1: 00010011
+SW2: 10111001
+SW3: 11100001
+
+NAND boot SW setting:
+SW1: 10001000
+SW2: 00111001
+SW3: 11110001
+
+SPI boot SW setting:
+SW1: 00100010
+SW2: 10111001
+SW3: 11100001
+
+SD boot SW setting:
+SW1: 00100000
+SW2: 00111001
+SW3: 11100001
+
+PBL-based image generation
+==========================
+Changes only the required register bit in in PBI commands.
+
+Provides reference code which might needs some
+modification as per requirement.
+example:
+By default PBI_SRC=14 (which is for IFC-NAND/NOR) in rcw.cfg file
+which needs to be changed for SPI and SD.
+
+For SD-boot
+==============
+1. Set RCW[192:195], PBI_SRC bits as 6 in RCW file (t1040d4_rcw.cfg type files)
+
+example:
+ RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg
+
+Change
+66000002 40000002 ec027000 01000000
+to
+66000002 40000002 6c027000 01000000
+
+2. SD does not support flush so remove flush from pbl, make changes in
+   tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000
+   with 0x091380c0
+
+For SPI-boot
+==============
+1. Set RCW[192:195], PBI_SRC bits as 5 in RCW file (t1040d4_rcw.cfg type files)
+
+example:
+ RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg
+
+Change
+66000002 40000002 ec027000 01000000
+to
+66000002 40000002 5c027000 01000000
+
+2. SPI does not support flush so remove flush from pbl, make changes in
+   tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000
+   with 0x091380c0
diff --git a/board/freescale/t104xrdb/cpld.c b/board/freescale/t104xrdb/cpld.c
index df0e348d4af..0ce4e470a71 100644
--- a/board/freescale/t104xrdb/cpld.c
+++ b/board/freescale/t104xrdb/cpld.c
@@ -69,7 +69,11 @@ static void cpld_dump_regs(void)
 	printf("int_status	 = 0x%02x\n", CPLD_READ(int_status));
 	printf("flash_ctl_status = 0x%02x\n", CPLD_READ(flash_ctl_status));
 	printf("fan_ctl_status	 = 0x%02x\n", CPLD_READ(fan_ctl_status));
+#if defined(CONFIG_T104XD4RDB)
+	printf("int_mask	 = 0x%02x\n", CPLD_READ(int_mask));
+#else
 	printf("led_ctl_status	 = 0x%02x\n", CPLD_READ(led_ctl_status));
+#endif
 	printf("sfp_ctl_status	 = 0x%02x\n", CPLD_READ(sfp_ctl_status));
 	printf("misc_ctl_status	 = 0x%02x\n", CPLD_READ(misc_ctl_status));
 	printf("boot_override	 = 0x%02x\n", CPLD_READ(boot_override));
diff --git a/board/freescale/t104xrdb/cpld.h b/board/freescale/t104xrdb/cpld.h
index 0da9a0159ba..2fb4105275e 100644
--- a/board/freescale/t104xrdb/cpld.h
+++ b/board/freescale/t104xrdb/cpld.h
@@ -21,7 +21,11 @@ struct cpld_data {
 	u8 int_status;		/* 0x12 - Interrupt status Register */
 	u8 flash_ctl_status;	/* 0x13 - Flash control and status register */
 	u8 fan_ctl_status;	/* 0x14 - Fan control and status register  */
+#if defined(CONFIG_T104XD4RDB)
+	u8 int_mask;		/* 0x15 - Interrupt mask Register */
+#else
 	u8 led_ctl_status;	/* 0x15 - LED control and status register */
+#endif
 	u8 sfp_ctl_status;	/* 0x16 - SFP control and status register  */
 	u8 misc_ctl_status;	/* 0x17 - Miscellanies ctrl & status register*/
 	u8 boot_override;	/* 0x18 - Boot override register */
@@ -38,3 +42,5 @@ void cpld_write(unsigned int reg, u8 value);
 #define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
 #define CPLD_WRITE(reg, value)\
 		cpld_write(offsetof(struct cpld_data, reg), value)
+#define MISC_CTL_SG_SEL		0x80
+#define MISC_CTL_AURORA_SEL	0x02
diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c
index e1148e568e8..cf79d2ddb2d 100644
--- a/board/freescale/t104xrdb/ddr.c
+++ b/board/freescale/t104xrdb/ddr.c
@@ -75,7 +75,11 @@ found:
 	 * Factors to consider for half-strength driver enable:
 	 *	- number of DIMMs installed
 	 */
+#ifdef CONFIG_SYS_FSL_DDR4
+	popts->half_strength_driver_enable = 1;
+#else
 	popts->half_strength_driver_enable = 0;
+#endif
 	/*
 	 * Write leveling override
 	 */
@@ -91,8 +95,14 @@ found:
 	popts->zq_en = 1;
 
 	/* DHC_EN =1, ODT = 75 Ohm */
+#ifdef CONFIG_SYS_FSL_DDR4
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_120OHM);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_120OHM) |
+		DDR_CDR2_VREF_OVRD(70);       /* Vref = 70% */
+#else
 	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
 	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+#endif
 }
 
 #if defined(CONFIG_DEEP_SLEEP)
diff --git a/board/freescale/t104xrdb/ddr.h b/board/freescale/t104xrdb/ddr.h
index ab1c32d10e7..b9c02f7fe0f 100644
--- a/board/freescale/t104xrdb/ddr.h
+++ b/board/freescale/t104xrdb/ddr.h
@@ -28,6 +28,9 @@ static const struct board_specific_parameters udimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2
 	 */
+#ifdef CONFIG_SYS_FSL_DDR4
+	{2,  1600, 4, 4,     6, 0x07090A0c, 0x0e0f100a},
+#elif defined(CONFIG_SYS_FSL_DDR3)
 	{2,  833,  4, 4,     6, 0x06060607, 0x08080807},
 	{2,  833,  0, 4,     6, 0x06060607, 0x08080807},
 	{2,  1350, 4, 4,     7, 0x0708080A, 0x0A0B0C09},
@@ -40,10 +43,14 @@ static const struct board_specific_parameters udimm0[] = {
 	{1,  1350, 0, 4,     7, 0x0708080A, 0x0A0B0C09},
 	{1,  1666, 4, 4,     7, 0x0808090B, 0x0C0D0E0A},
 	{1,  1666, 0, 4,     7, 0x0808090B, 0x0C0D0E0A},
+#else
+#error DDR type not defined
+#endif
 	{}
 };
 
+#endif
+
 static const struct board_specific_parameters *udimms[] = {
 	udimm0,
 };
-#endif
diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c
index 7581a4cdd44..71d0457d432 100644
--- a/board/freescale/t104xrdb/eth.c
+++ b/board/freescale/t104xrdb/eth.c
@@ -43,9 +43,11 @@ int board_eth_init(bd_t *bis)
 		int idx = i - FM1_DTSEC1;
 
 		switch (fm_info_get_enet_if(i)) {
-#ifdef CONFIG_T1040RDB
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB)
 		case PHY_INTERFACE_MODE_SGMII:
-			/* T1040RDB only supports SGMII on DTSEC3 */
+			/* T1040RDB & T1040D4RDB only supports SGMII on
+			 * DTSEC3
+			 */
 			fm_info_set_phy_address(FM1_DTSEC3,
 						CONFIG_SYS_SGMII1_PHY_ADDR);
 			break;
@@ -60,6 +62,20 @@ int board_eth_init(bd_t *bis)
 						CONFIG_SYS_SGMII1_PHY_ADDR);
 			break;
 #endif
+#ifdef CONFIG_T1042D4RDB
+		case PHY_INTERFACE_MODE_SGMII:
+			/* T1042D4RDB supports SGMII on DTSEC1, DTSEC2
+			 *  & DTSEC3
+			 */
+			if (FM1_DTSEC1 == i)
+				phy_addr = CONFIG_SYS_SGMII1_PHY_ADDR;
+			if (FM1_DTSEC2 == i)
+				phy_addr = CONFIG_SYS_SGMII2_PHY_ADDR;
+			if (FM1_DTSEC3 == i)
+				phy_addr = CONFIG_SYS_SGMII3_PHY_ADDR;
+			fm_info_set_phy_address(i, phy_addr);
+			break;
+#endif
 		case PHY_INTERFACE_MODE_RGMII:
 			if (FM1_DTSEC4 == i)
 				phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR;
diff --git a/board/freescale/t104xrdb/t1040d4_rcw.cfg b/board/freescale/t104xrdb/t1040d4_rcw.cfg
new file mode 100644
index 00000000000..c1034b3dfa3
--- /dev/null
+++ b/board/freescale/t104xrdb/t1040d4_rcw.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+# serdes protocol 0x66
+0c18000e 0e000000 00000000 00000000
+66000002 40000002 ec027000 01000000
+00000000 00000000 00000000 00030810
+00000000 0342580f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042d4_rcw.cfg b/board/freescale/t104xrdb/t1042d4_rcw.cfg
new file mode 100644
index 00000000000..9e0ee2795f8
--- /dev/null
+++ b/board/freescale/t104xrdb/t1042d4_rcw.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+# serdes protocol 0x86
+0c18000e 0e000000 00000000 00000000
+86000002 40000002 ec027000 01000000
+00000000 00000000 00000000 00030810
+00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c
index 9cd5e157c48..c4b658d55d2 100644
--- a/board/freescale/t104xrdb/t104xrdb.c
+++ b/board/freescale/t104xrdb/t104xrdb.c
@@ -28,7 +28,11 @@ int checkboard(void)
 	struct cpu_type *cpu = gd->arch.cpu;
 	u8 sw;
 
+#ifdef CONFIG_T104XD4RDB
+	printf("Board: %sD4RDB\n", cpu->name);
+#else
 	printf("Board: %sRDB\n", cpu->name);
+#endif
 	printf("Board rev: 0x%02x CPLD ver: 0x%02x, ",
 	       CPLD_READ(hw_ver), CPLD_READ(sw_ver));
 
@@ -91,6 +95,34 @@ int board_early_init_r(void)
 
 int misc_init_r(void)
 {
+	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_s1;
+
+	srds_s1 = in_be32(&gur->rcwsr[4]) >> 24;
+
+	printf("SERDES Reference : 0x%X\n", srds_s1);
+
+	/* select SGMII*/
+	if (srds_s1 == 0x86)
+		CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) |
+					 MISC_CTL_SG_SEL);
+
+	/* select SGMII and Aurora*/
+	if (srds_s1 == 0x8E)
+		CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) |
+					 MISC_CTL_SG_SEL | MISC_CTL_AURORA_SEL);
+
+#if defined(CONFIG_T1040D4RDB)
+	/* Mask all CPLD interrupt sources, except QSGMII interrupts */
+	if (CPLD_READ(sw_ver) < 0x03) {
+		debug("CPLD SW version 0x%02x doesn't support int_mask\n",
+		      CPLD_READ(sw_ver));
+	} else {
+		CPLD_WRITE(int_mask, CPLD_INT_MASK_ALL &
+			   ~(CPLD_INT_MASK_QSGMII1 | CPLD_INT_MASK_QSGMII2));
+	}
+#endif
+
 	return 0;
 }