diff options
| author | Chaitanya Sakinam | 2020-06-09 16:21:48 +0530 |
|---|---|---|
| committer | Priyanka Jain | 2020-07-27 14:16:28 +0530 |
| commit | cb1de6067aae8bd3dc8161db0d92f19a4e60942a (patch) | |
| tree | 376a6d3a319def6b3ecdade8ffdcd31501e3eebe /board/freescale | |
| parent | 3fba2311a3c4bbe6301fbdfbdb97f8ecba75778a (diff) | |
armv8: ls1012a: RGMII ports require internal delay
The correct setting for the RGMII ports on LS1012ARDB is to
enable delay on both Rx and Tx so the interface mode used should
be PHY_INTERFACE_MODE_RGMII_ID
Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
Signed-off-by: Anji J <anji.jagarlmudi@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Diffstat (limited to 'board/freescale')
| -rw-r--r-- | board/freescale/ls1012ardb/eth.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/board/freescale/ls1012ardb/eth.c b/board/freescale/ls1012ardb/eth.c index 63d40de2a3e..a65ff4dc9c4 100644 --- a/board/freescale/ls1012ardb/eth.c +++ b/board/freescale/ls1012ardb/eth.c @@ -113,7 +113,7 @@ int pfe_eth_board_init(struct udevice *dev) /* MAC2 */ pfe_set_phy_address_mode(priv->gemac_port, CONFIG_PFE_EMAC2_PHY_ADDR, - PHY_INTERFACE_MODE_RGMII_TXID); + PHY_INTERFACE_MODE_RGMII_ID); } break; case 0x2208: |