rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

3 files changed, 25 insertions, 25 deletions

diff --git a/board/ids8247/config.mk b/board/ids8247/config.mk
index 136cdb8641c..2a7f3dd122f 100644
--- a/board/ids8247/config.mk
+++ b/board/ids8247/config.mk
@@ -25,7 +25,7 @@
 # IDS 8247 Board
 #
 
-# This should be equal to the CFG_FLASH_BASE define in config_IDS8247.h
+# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_IDS8247.h
 # for the "final" configuration, with U-Boot in flash, or the address
 # in RAM where U-Boot is loaded at for debugging.
 #
diff --git a/board/ids8247/flash.c b/board/ids8247/flash.c
index 5800ce2f823..5107553c977 100644
--- a/board/ids8247/flash.c
+++ b/board/ids8247/flash.c
@@ -31,11 +31,11 @@
 
 #include <common.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 #if defined(CONFIG_ENV_IS_IN_FLASH)
 # ifndef  CONFIG_ENV_ADDR
-#  define CONFIG_ENV_ADDR	(CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
 # ifndef  CONFIG_ENV_SIZE
 #  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
@@ -84,16 +84,16 @@ unsigned long flash_init (void)
 {
 	unsigned long size_b0;
 	int i;
-	volatile immap_t * immr = (immap_t *)CFG_IMMR;
+	volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immr->im_memctl;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here - FIXME XXX */
-	size_b0 = flash_get_size ((FPW *) CFG_FLASH0_BASE, &flash_info[0]);
+	size_b0 = flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
@@ -105,11 +105,11 @@ unsigned long flash_init (void)
 
 	flash_get_offsets (0xff800000, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	(void) flash_protect (FLAG_PROTECT_SET,
-				CFG_MONITOR_BASE,
-				CFG_MONITOR_BASE + monitor_flash_len - 1,
+				CONFIG_SYS_MONITOR_BASE,
+				CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 				&flash_info[0]);
 #endif
 
@@ -258,10 +258,10 @@ static ulong flash_get_size (FPWV * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
@@ -332,7 +332,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-			    if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+			    if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 				*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 				*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -472,7 +472,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
 	start = get_timer (0);
 
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c
index 065014a11e4..68b70703f07 100644
--- a/board/ids8247/ids8247.c
+++ b/board/ids8247/ids8247.c
@@ -254,7 +254,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -265,7 +265,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 		*base = c;
 
 	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
 	*base = c;
@@ -278,7 +278,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
 	long psize, lsize;
@@ -286,15 +286,15 @@ phys_size_t initdram (int board_type)
 	psize = 16 * 1024 * 1024;
 	lsize = 0;
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* 60x SDRAM setup:
 	 */
-	psize = try_init (memctl, CFG_PSDMR, CFG_OR2,
-						  (uchar *) CFG_SDRAM_BASE);
-#endif /* CFG_RAMBOOT */
+	psize = try_init (memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR2,
+						  (uchar *) CONFIG_SYS_SDRAM_BASE);
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	icache_enable ();
 
@@ -315,8 +315,8 @@ nand_init (void)
 {
 	ulong totlen = 0;
 
-	debug ("Probing at 0x%.8x\n", CFG_NAND0_BASE);
-	totlen += nand_probe (CFG_NAND0_BASE);
+	debug ("Probing at 0x%.8x\n", CONFIG_SYS_NAND0_BASE);
+	totlen += nand_probe (CONFIG_SYS_NAND0_BASE);
 
 	printf ("%4lu MB\n", totlen >>20);
 }