diff options
| author | Peng Fan | 2022-06-11 20:21:00 +0800 |
|---|---|---|
| committer | Stefano Babic | 2022-06-14 21:33:13 +0200 |
| commit | 0a16da8079a86a566c62bfb4ec2d12bd9d6cb306 (patch) | |
| tree | c5429ed8d8636a911993a81b42dd492fee5152ea /board/kontron | |
| parent | bb9e14cfd0e8adc3e8a5a5d112cd7a4ca5c39472 (diff) | |
imx: kontron-sl-mx8mm: enable DM_SERIAL
Enable CONFIG_DM_SERIAL. uart and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_init to make sure driver
model work.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Diffstat (limited to 'board/kontron')
| -rw-r--r-- | board/kontron/sl-mx8mm/spl.c | 12 |
1 files changed, 2 insertions, 10 deletions
diff --git a/board/kontron/sl-mx8mm/spl.c b/board/kontron/sl-mx8mm/spl.c index 4ef03c8c172..a58a75dc958 100644 --- a/board/kontron/sl-mx8mm/spl.c +++ b/board/kontron/sl-mx8mm/spl.c @@ -32,7 +32,6 @@ enum { #define GPIO_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) #define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE) -#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) #define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) #define TOUCH_RESET_GPIO IMX_GPIO_NR(3, 23) @@ -51,11 +50,6 @@ static iomux_v3_cfg_t const touch_gpio[] = { IMX8MM_PAD_SAI5_RXD2_GPIO3_IO23 | MUX_PAD_CTRL(GPIO_PAD_CTRL) }; -static iomux_v3_cfg_t const uart_pads[] = { - IMX8MM_PAD_UART3_RXD_UART3_RX | MUX_PAD_CTRL(UART_PAD_CTRL), - IMX8MM_PAD_UART3_TXD_UART3_TX | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - static iomux_v3_cfg_t const wdog_pads[] = { IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), }; @@ -230,8 +224,6 @@ int board_early_init_f(void) set_wdog_reset(wdog); - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); - return 0; } @@ -273,8 +265,6 @@ void board_init_f(ulong dummy) timer_init(); - preloader_console_init(); - /* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start); @@ -284,6 +274,8 @@ void board_init_f(ulong dummy) hang(); } + preloader_console_init(); + enable_tzc380(); /* PMIC initialization */ |