MPC824x: remove obsolete "PN62" board

The MPC824x processors have long reached EOL, and the PN62 board has
not seen any board-specific updates for more than a decade.  It is now
causing build issues.  Instead of wasting time on things nobody is
interested in any more, we rather drop this board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Wolfgang Grandegger <wg@grandegger.com>
cc: Tom Rini <trini@ti.com>

1 files changed, 0 insertions, 171 deletions

diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c
deleted file mode 100644
index 81829dd75f3..00000000000
--- a/board/pn62/pn62.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <net.h>
-#include <pci.h>
-#include <netdev.h>
-
-#include "pn62.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int get_serial_number (char *string, int size);
-static void get_mac_address(int id, u8 *mac);
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-void show_boot_progress (int phase)
-{
-	/*
-	 * Show phases of the bootm command on the front panel
-	 * LEDs and the scratchpad register #3 as well. We use
-	 * blinking LEDs for logical "1".
-	 */
-	if (phase > 0) {
-		set_led (8, (phase & 0x1) ? LED_SLOW_CLOCK : LED_0);
-		set_led (9, (phase & 0x2) ? LED_SLOW_CLOCK : LED_0);
-		set_led (10, (phase & 0x4) ? LED_SLOW_CLOCK : LED_0);
-		set_led (11, (phase & 0x8) ? LED_SLOW_CLOCK : LED_0);
-	}
-	i2155x_write_scrapad (BOOT_STATUS, phase);
-	if (phase < 0)
-		i2155x_write_scrapad (BOOT_DONE, BOOT_DONE_ERROR);
-}
-#endif
-
-void show_startup_phase (int phase)
-{
-	/*
-	 * Show the phase of U-Boot startup on the front panel
-	 * LEDs and the scratchpad register #3 as well.
-	 */
-	if (phase > 0) {
-		set_led (8, (phase & 0x1) ? LED_1 : LED_0);
-		set_led (9, (phase & 0x2) ? LED_1 : LED_0);
-		set_led (10, (phase & 0x4) ? LED_1 : LED_0);
-		set_led (11, (phase & 0x8) ? LED_1 : LED_0);
-	}
-	i2155x_write_scrapad (BOOT_STATUS, phase);
-	if (phase < 0)
-		i2155x_write_scrapad (BOOT_DONE, BOOT_DONE_ERROR);
-}
-
-int checkboard (void)
-{
-	show_startup_phase (1);
-	puts ("Board: PN62\n");
-	return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
-	long size;
-	long new_bank0_end;
-	long mear1;
-	long emear1;
-
-	show_startup_phase (2);
-
-	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
-
-	new_bank0_end = size - 1;
-	mear1 = mpc824x_mpc107_getreg (MEAR1);
-	emear1 = mpc824x_mpc107_getreg (EMEAR1);
-	mear1 = (mear1 & 0xFFFFFF00) |
-		((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
-	emear1 = (emear1 & 0xFFFFFF00) |
-		((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
-	mpc824x_mpc107_setreg (MEAR1, mear1);
-	mpc824x_mpc107_setreg (EMEAR1, emear1);
-
-	return (size);
-}
-
-/*
- * Initialize PCI Devices. We rely on auto-configuration.
- */
-#ifndef CONFIG_PCI_PNP
-#error "CONFIG_PCI_PNP is not defined, please correct!"
-#endif
-
-struct pci_controller hose = {
-};
-
-void pci_init_board (void)
-{
-	show_startup_phase (4);
-	pci_mpc824x_init (&hose);
-
-	show_startup_phase (5);
-	i2155x_init ();
-	show_startup_phase (6);
-	am79c95x_init ();
-	show_startup_phase (7);
-}
-
-int misc_init_r (void)
-{
-	char str[20];
-	u8 mac[6];
-
-	show_startup_phase (8);
-	/*
-	 * Get serial number and ethernet addresses if not already defined
-	 * and update the board info structure and the environment.
-	 */
-	if (getenv ("serial#") == NULL &&
-		get_serial_number (str, strlen (str)) > 0) {
-		setenv ("serial#", str);
-	}
-	show_startup_phase (9);
-
-	if (!eth_getenv_enetaddr("ethaddr", mac)) {
-		get_mac_address(0, mac);
-		eth_setenv_enetaddr("ethaddr", mac);
-	}
-	show_startup_phase (10);
-
-#ifdef CONFIG_HAS_ETH1
-	if (!eth_getenv_enetaddr("eth1addr", mac)) {
-		get_mac_address(1, mac);
-		eth_setenv_enetaddr("eth1addr", mac);
-	}
-#endif /* CONFIG_HAS_ETH1 */
-	show_startup_phase (11);
-
-	/* Tell everybody that U-Boot is up and runnig */
-	i2155x_write_scrapad (0, 0x12345678);
-	return (0);
-}
-
-static int get_serial_number (char *string, int size)
-{
-	int i;
-	char c;
-
-	if (size < I2155X_VPD_SN_SIZE)
-		size = I2155X_VPD_SN_SIZE;
-	for (i = 0; i < (size - 1); i++) {
-		i2155x_read_vpd (I2155X_VPD_SN_START + i, 1, (uchar *)&c);
-		if (c == '\0')
-			break;
-		string[i] = c;
-	}
-	string[i] = '\0';			/* make sure it's terminated */
-
-	return i;
-}
-
-static void get_mac_address(int id, u8 *mac)
-{
-	i2155x_read_vpd (I2155X_VPD_MAC0_START + 6 * id, 6, mac);
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}