arm: Remove snowball and u8500_href boards

These boards have not been converted to generic board by the deadline.
Remove them.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 340 deletions

diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c
deleted file mode 100644
index c3061e20d95..00000000000
--- a/board/st-ericsson/snowball/snowball.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2009
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <malloc.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-#include <asm/arch/db8500_pincfg.h>
-#include <asm/arch/prcmu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/sys_proto.h>
-
-#ifdef CONFIG_MMC
-#include "../../../drivers/mmc/arm_pl180_mmci.h"
-#endif
-#include "db8500_pins.h"
-
-/*
- * Get a global data pointer
- */
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Memory controller register
- */
-#define DMC_BASE_ADDR			0x80156000
-#define DMC_CTL_97			(DMC_BASE_ADDR + 0x184)
-
-/*
- * GPIO pin config common for MOP500/HREF boards
- */
-unsigned long gpio_cfg_common[] = {
-	/* I2C */
-	GPIO147_I2C0_SCL,
-	GPIO148_I2C0_SDA,
-	GPIO16_I2C1_SCL,
-	GPIO17_I2C1_SDA,
-	GPIO10_I2C2_SDA,
-	GPIO11_I2C2_SCL,
-	GPIO229_I2C3_SDA,
-	GPIO230_I2C3_SCL,
-
-	/* SSP0, to AB8500 */
-	GPIO143_SSP0_CLK,
-	GPIO144_SSP0_FRM,
-	GPIO145_SSP0_RXD | PIN_PULL_DOWN,
-	GPIO146_SSP0_TXD,
-
-	/* MMC0 (MicroSD card) */
-	GPIO18_MC0_CMDDIR	| PIN_OUTPUT_HIGH,
-	GPIO19_MC0_DAT0DIR	| PIN_OUTPUT_HIGH,
-	GPIO20_MC0_DAT2DIR	| PIN_OUTPUT_HIGH,
-	GPIO21_MC0_DAT31DIR	| PIN_OUTPUT_HIGH,
-	GPIO22_MC0_FBCLK	| PIN_INPUT_NOPULL,
-	GPIO23_MC0_CLK		| PIN_OUTPUT_LOW,
-	GPIO24_MC0_CMD		| PIN_INPUT_PULLUP,
-	GPIO25_MC0_DAT0		| PIN_INPUT_PULLUP,
-	GPIO26_MC0_DAT1		| PIN_INPUT_PULLUP,
-	GPIO27_MC0_DAT2		| PIN_INPUT_PULLUP,
-	GPIO28_MC0_DAT3		| PIN_INPUT_PULLUP,
-
-	/* MMC4 (On-board eMMC) */
-	GPIO197_MC4_DAT3	| PIN_INPUT_PULLUP,
-	GPIO198_MC4_DAT2	| PIN_INPUT_PULLUP,
-	GPIO199_MC4_DAT1	| PIN_INPUT_PULLUP,
-	GPIO200_MC4_DAT0	| PIN_INPUT_PULLUP,
-	GPIO201_MC4_CMD		| PIN_INPUT_PULLUP,
-	GPIO202_MC4_FBCLK	| PIN_INPUT_NOPULL,
-	GPIO203_MC4_CLK		| PIN_OUTPUT_LOW,
-	GPIO204_MC4_DAT7	| PIN_INPUT_PULLUP,
-	GPIO205_MC4_DAT6	| PIN_INPUT_PULLUP,
-	GPIO206_MC4_DAT5	| PIN_INPUT_PULLUP,
-	GPIO207_MC4_DAT4	| PIN_INPUT_PULLUP,
-
-	/* UART2, console */
-	GPIO29_U2_RXD	| PIN_INPUT_PULLUP,
-	GPIO30_U2_TXD	| PIN_OUTPUT_HIGH,
-	GPIO31_U2_CTSn	| PIN_INPUT_PULLUP,
-	GPIO32_U2_RTSn	| PIN_OUTPUT_HIGH,
-
-	/*
-	 * USB, pin 256-267 USB, Is probably already setup correctly from
-	 * BootROM/boot stages, but we don't trust that and set it up anyway
-	 */
-	GPIO256_USB_NXT,
-	GPIO257_USB_STP,
-	GPIO258_USB_XCLK,
-	GPIO259_USB_DIR,
-	GPIO260_USB_DAT7,
-	GPIO261_USB_DAT6,
-	GPIO262_USB_DAT5,
-	GPIO263_USB_DAT4,
-	GPIO264_USB_DAT3,
-	GPIO265_USB_DAT2,
-	GPIO266_USB_DAT1,
-	GPIO267_USB_DAT0,
-};
-
-unsigned long gpio_cfg_snowball[] = {
-	/* MMC0 (MicroSD card) */
-	GPIO217_GPIO    | PIN_OUTPUT_HIGH,      /* MMC_EN */
-	GPIO218_GPIO    | PIN_INPUT_NOPULL,     /* MMC_CD */
-	GPIO228_GPIO    | PIN_OUTPUT_HIGH,      /* SD_SEL */
-
-	/* eMMC */
-	GPIO167_GPIO    | PIN_OUTPUT_HIGH,      /* RSTn_MLC */
-
-	/* LAN */
-	GPIO131_SM_ADQ8,
-	GPIO132_SM_ADQ9,
-	GPIO133_SM_ADQ10,
-	GPIO134_SM_ADQ11,
-	GPIO135_SM_ADQ12,
-	GPIO136_SM_ADQ13,
-	GPIO137_SM_ADQ14,
-	GPIO138_SM_ADQ15,
-
-	/* RSTn_LAN */
-	GPIO141_GPIO	| PIN_OUTPUT_HIGH,
-};
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init(void)
-{
-	/*
-	 * Setup board (bd) and board-info (bi).
-	 * bi_arch_number: Unique id for this board. It will passed in r1 to
-	 *    Linux startup code and is the machine_id.
-	 * bi_boot_params: Where this board expects params.
-	 */
-	gd->bd->bi_arch_number = MACH_TYPE_SNOWBALL;
-	gd->bd->bi_boot_params = 0x00000100;
-
-	/* Configure GPIO pins needed by U-boot */
-	db8500_gpio_config_pins(gpio_cfg_common, ARRAY_SIZE(gpio_cfg_common));
-
-	db8500_gpio_config_pins(gpio_cfg_snowball,
-						ARRAY_SIZE(gpio_cfg_snowball));
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	gd->ram_size = gd->bd->bi_dram[0].size =
-		get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
-
-	return 0;
-}
-
-static int raise_ab8500_gpio16(void)
-{
-	int ret;
-
-	/* selection */
-	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_SEL2_REG);
-	if (ret < 0)
-		goto out;
-
-	ret |= 0x80;
-	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_SEL2_REG, ret);
-	if (ret < 0)
-		goto out;
-
-	/* direction */
-	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR2_REG);
-	if (ret < 0)
-		goto out;
-
-	ret |= 0x80;
-	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR2_REG, ret);
-	if (ret < 0)
-		goto out;
-
-	/* out */
-	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT2_REG);
-	if (ret < 0)
-		goto out;
-
-	ret |= 0x80;
-	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT2_REG, ret);
-
-out:
-	return ret;
-}
-
-static int raise_ab8500_gpio26(void)
-{
-	int ret;
-
-	/* selection */
-	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR4_REG);
-	if (ret < 0)
-		goto out;
-
-	ret |= 0x2;
-	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR4_REG, ret);
-	if (ret < 0)
-		goto out;
-
-	/* out */
-	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT4_REG);
-	if (ret < 0)
-		goto out;
-
-	ret |= 0x2;
-	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT4_REG, ret);
-
-out:
-	return ret;
-}
-
-int board_late_init(void)
-{
-	/* enable 3V3 for LAN controller */
-	if (raise_ab8500_gpio26() >= 0) {
-		/* Turn on FSMC device */
-		writel(0x1, 0x8000f000);
-		writel(0x1, 0x8000f008);
-
-		/* setup FSMC for LAN controler */
-		writel(0x305b, 0x80000000);
-
-		/* run at the highest possible speed */
-		writel(0x01010210, 0x80000004);
-	} else
-		printf("error: can't raise GPIO26\n");
-
-	/* enable 3v6 for GBF chip */
-	if ((raise_ab8500_gpio16() < 0))
-		printf("error: cant' raise GPIO16\n");
-
-	/* empty UART RX FIFO */
-	while (tstc())
-		(void) getc();
-
-	return 0;
-}
-
-#ifdef CONFIG_MMC
-/*
- * emmc_host_init - initialize the emmc controller.
- * Configure GPIO settings, set initial clock and power for emmc slot.
- * Initialize mmc struct and register with mmc framework.
- */
-static int emmc_host_init(void)
-{
-	struct pl180_mmc_host *host;
-
-	host = malloc(sizeof(struct pl180_mmc_host));
-	if (!host)
-		return -ENOMEM;
-	memset(host, 0, sizeof(*host));
-
-	host->base = (struct sdi_registers *)CFG_EMMC_BASE;
-	host->pwr_init = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON;
-	host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 |
-				 SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN;
-	strcpy(host->name, "EMMC");
-	host->caps = MMC_MODE_8BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz;
-	host->voltages = VOLTAGE_WINDOW_MMC;
-	host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2);
-	host->clock_max = ARM_MCLK / 2;
-	host->clock_in = ARM_MCLK;
-	host->version2 = 1;
-
-	return arm_pl180_mmci_init(host);
-}
-
-/*
- * mmc_host_init - initialize the external mmc controller.
- * Configure GPIO settings, set initial clock and power for mmc slot.
- * Initialize mmc struct and register with mmc framework.
- */
-static int mmc_host_init(void)
-{
-	struct pl180_mmc_host *host;
-	u32 sdi_u32;
-
-	host = malloc(sizeof(struct pl180_mmc_host));
-	if (!host)
-		return -ENOMEM;
-	memset(host, 0, sizeof(*host));
-
-	host->base = (struct sdi_registers *)CFG_MMC_BASE;
-	sdi_u32 = 0xBF;
-	writel(sdi_u32, &host->base->power);
-	host->pwr_init = 0xBF;
-	host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 |
-				 SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN;
-	strcpy(host->name, "MMC");
-	host->caps = MMC_MODE_8BIT;
-	host->b_max = 0;
-	host->voltages = VOLTAGE_WINDOW_SD;
-	host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2);
-	host->clock_max = ARM_MCLK / 2;
-	host->clock_in = ARM_MCLK;
-	host->version2 = 1;
-
-	return arm_pl180_mmci_init(host);
-}
-
-/*
- * board_mmc_init - initialize all the mmc/sd host controllers.
- * Called by generic mmc framework.
- */
-int board_mmc_init(bd_t *bis)
-{
-	int error;
-
-	(void) bis;
-
-	error = emmc_host_init();
-	if (error) {
-		printf("emmc_host_init() %d\n", error);
-		return -1;
-	}
-
-	u8500_mmc_power_init();
-
-	error = mmc_host_init();
-	if (error) {
-		printf("mmc_host_init() %d\n", error);
-		return -1;
-	}
-
-	return 0;
-}
-#endif /* CONFIG_MMC */