diff options
| author | Igor Opaniuk | 2021-02-09 13:52:45 +0200 |
|---|---|---|
| committer | Heiko Schocher | 2021-02-21 06:08:00 +0100 |
| commit | 2147a16983d17bcb0438607aa7760494afc27014 (patch) | |
| tree | 153470783919253c3a9bbcbc0e34b38c62f138f1 /board/ti/am335x | |
| parent | a907dce88e462251d96be9cdd72900543e4798df (diff) | |
dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO
Use CONFIG_IS_ENABLED() macro, which provides more convenient
way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs
for both SPL and U-Boot proper.
CONFIG_IS_ENABLED(DM_I2C) expands to:
- 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y',
- 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y',
- 0 otherwise.
All occurences were replaced automatically using these bash cmds:
$ find . -type f -exec sed -i
's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Diffstat (limited to 'board/ti/am335x')
| -rw-r--r-- | board/ti/am335x/board.c | 8 | ||||
| -rw-r--r-- | board/ti/am335x/mux.c | 2 |
2 files changed, 5 insertions, 5 deletions
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 2cd0a1281f9..bc1657e88fd 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -77,7 +77,7 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; void do_board_detect(void) { enable_i2c0_pin_mux(); -#ifndef CONFIG_DM_I2C +#if !CONFIG_IS_ENABLED(DM_I2C) i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); #endif if (ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS, @@ -336,7 +336,7 @@ static void scale_vcores_bone(int freq) if (board_is_bone() && !strncmp(board_ti_get_rev(), "00A1", 4)) return; -#ifndef CONFIG_DM_I2C +#if !CONFIG_IS_ENABLED(DM_I2C) if (i2c_probe(TPS65217_CHIP_PM)) return; #else @@ -435,7 +435,7 @@ void scale_vcores_generic(int freq) * 1.10V. For MPU voltage we need to switch based on * the frequency we are running at. */ -#ifndef CONFIG_DM_I2C +#if !CONFIG_IS_ENABLED(DM_I2C) if (i2c_probe(TPS65910_CTRL_I2C_ADDR)) return; #else @@ -469,7 +469,7 @@ void gpi2c_init(void) if (first_time) { enable_i2c0_pin_mux(); -#ifndef CONFIG_DM_I2C +#if !CONFIG_IS_ENABLED(DM_I2C) i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); #endif diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 6fb2c009ba0..03adcd2b762 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -333,7 +333,7 @@ static unsigned short detect_daughter_board_profile(void) { unsigned short val; -#ifndef CONFIG_DM_I2C +#if !CONFIG_IS_ENABLED(DM_I2C) if (i2c_probe(I2C_CPLD_ADDR)) return PROFILE_NONE; |