diff options
| author | Nishanth Menon | 2022-06-17 13:26:11 -0500 |
|---|---|---|
| committer | Tom Rini | 2022-07-06 14:30:08 -0400 |
| commit | bc1de483711c30e32dffdf71574aa878c1087ed0 (patch) | |
| tree | d83e5e4dc8692932a7d36185cebedc8ccce300da /board/ti/common | |
| parent | 8b5218e7cb9ff4223f2825c04e45dabccbd15a48 (diff) | |
board: ti: common: Handle the legacy eeprom address width properly
Due to supply chain issues, we are starting to see a mixture of eeprom
usage including the smaller 7-bit addressing eeproms such as 24c04
used for eeproms.
These eeproms don't respond well to 2 byte addressing and fail the
read operation. We do have a check to ensure that we are reading the
alternate addressing size, however the valid failure prevents us
from checking at 1 byte anymore.
Rectify the same by falling through and depend on header data comparison
to ensure that we have valid data.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'board/ti/common')
| -rw-r--r-- | board/ti/common/board_detect.c | 22 |
1 files changed, 15 insertions, 7 deletions
diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c index 381cddc00ad..0806dea11ed 100644 --- a/board/ti/common/board_detect.c +++ b/board/ti/common/board_detect.c @@ -86,7 +86,7 @@ __weak void gpi2c_init(void) static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr, u32 header, u32 size, uint8_t *ep) { - u32 hdr_read; + u32 hdr_read = 0xdeadbeef; int rc; #if CONFIG_IS_ENABLED(DM_I2C) @@ -107,9 +107,13 @@ static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr, if (rc) return rc; - rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4); - if (rc) - return rc; + /* + * Skip checking result here since this could be a valid i2c read fail + * on some boards that use 1 byte addressing. + * We must allow for fall through to check the data if 1 byte + * addressing works + */ + (void)dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4); /* Corrupted data??? */ if (hdr_read != header) { @@ -144,9 +148,13 @@ static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr, */ byte = 2; - rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4); - if (rc) - return rc; + /* + * Skip checking result here since this could be a valid i2c read fail + * on some boards that use 1 byte addressing. + * We must allow for fall through to check the data if 1 byte + * addressing works + */ + (void)i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4); /* Corrupted data??? */ if (hdr_read != header) { |