ti814x: Remove platform

The TI814x (DM814x) platform is rather old and in need of a lot of
migration work.  As much of that work is well past the deadline, remove
this platform.

Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 190 deletions

diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
deleted file mode 100644
index 8ed80d2f462..00000000000
--- a/board/ti/ti814x/evm.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * evm.c
- *
- * Board functions for TI814x EVM
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
- */
-
-#include <common.h>
-#include <cpsw.h>
-#include <env.h>
-#include <errno.h>
-#include <init.h>
-#include <net.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-#include <asm/emif.h>
-#include <asm/gpio.h>
-#include "evm.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-/* UART Defines */
-#ifdef CONFIG_SPL_BUILD
-static const struct cmd_control evm_ddr2_cctrl_data = {
-	.cmd0csratio	= 0x80,
-	.cmd0iclkout	= 0x00,
-
-	.cmd1csratio	= 0x80,
-	.cmd1iclkout	= 0x00,
-
-	.cmd2csratio	= 0x80,
-	.cmd2iclkout	= 0x00,
-};
-
-static const struct emif_regs evm_ddr2_emif0_regs = {
-	.sdram_config			= 0x40801ab2,
-	.ref_ctrl			= 0x10000c30,
-	.sdram_tim1			= 0x0aaaf552,
-	.sdram_tim2			= 0x043631d2,
-	.sdram_tim3			= 0x00000327,
-	.emif_ddr_phy_ctlr_1		= 0x00000007
-};
-
-static const struct emif_regs evm_ddr2_emif1_regs = {
-	.sdram_config			= 0x40801ab2,
-	.ref_ctrl			= 0x10000c30,
-	.sdram_tim1			= 0x0aaaf552,
-	.sdram_tim2			= 0x043631d2,
-	.sdram_tim3			= 0x00000327,
-	.emif_ddr_phy_ctlr_1		= 0x00000007
-};
-
-const struct dmm_lisa_map_regs evm_lisa_map_regs = {
-	.dmm_lisa_map_0			= 0x00000000,
-	.dmm_lisa_map_1			= 0x00000000,
-	.dmm_lisa_map_2			= 0x806c0300,
-	.dmm_lisa_map_3			= 0x806c0300,
-};
-
-static const struct ddr_data evm_ddr2_data = {
-	.datardsratio0		= ((0x35<<10) | (0x35<<0)),
-	.datawdsratio0		= ((0x20<<10) | (0x20<<0)),
-	.datawiratio0		= ((0<<10) | (0<<0)),
-	.datagiratio0		= ((0<<10) | (0<<0)),
-	.datafwsratio0		= ((0x90<<10) | (0x90<<0)),
-	.datawrsratio0		= ((0x50<<10) | (0x50<<0)),
-};
-
-void set_uart_mux_conf(void)
-{
-	/* Set UART pins */
-	enable_uart0_pin_mux();
-}
-
-void set_mux_conf_regs(void)
-{
-	/* Set MMC pins */
-	enable_mmc1_pin_mux();
-
-	/* Set Ethernet pins */
-	enable_enet_pin_mux();
-}
-
-void sdram_init(void)
-{
-	config_dmm(&evm_lisa_map_regs);
-
-	config_ddr(0, NULL, &evm_ddr2_data, &evm_ddr2_cctrl_data,
-		   &evm_ddr2_emif0_regs, 0);
-	config_ddr(0, NULL, &evm_ddr2_data, &evm_ddr2_cctrl_data,
-		   &evm_ddr2_emif1_regs, 1);
-}
-#endif
-
-/*
- * Basic board specific setup.  Pinmux has been handled already.
- */
-int board_init(void)
-{
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-	return 0;
-}
-
-#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
-{
-	omap_mmc_init(1, 0, 0, -1, -1);
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-static void cpsw_control(int enabled)
-{
-	/* VTP can be added here */
-
-	return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
-	{
-		.slave_reg_ofs	= 0x50,
-		.sliver_reg_ofs	= 0x700,
-		.phy_addr	= 1,
-	},
-	{
-		.slave_reg_ofs	= 0x90,
-		.sliver_reg_ofs	= 0x740,
-		.phy_addr	= 0,
-	},
-};
-
-static struct cpsw_platform_data cpsw_data = {
-	.mdio_base		= CPSW_MDIO_BASE,
-	.cpsw_base		= CPSW_BASE,
-	.mdio_div		= 0xff,
-	.channels		= 8,
-	.cpdma_reg_ofs		= 0x100,
-	.slaves			= 1,
-	.slave_data		= cpsw_slaves,
-	.ale_reg_ofs		= 0x600,
-	.ale_entries		= 1024,
-	.host_port_reg_ofs	= 0x28,
-	.hw_stats_reg_ofs	= 0x400,
-	.bd_ram_ofs		= 0x2000,
-	.mac_control		= (1 << 5),
-	.control		= cpsw_control,
-	.host_port_num		= 0,
-	.version		= CPSW_CTRL_VERSION_1,
-};
-#endif
-
-int board_eth_init(bd_t *bis)
-{
-	uint8_t mac_addr[6];
-	uint32_t mac_hi, mac_lo;
-
-	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
-		printf("<ethaddr> not set. Reading from E-fuse\n");
-		/* try reading mac address from efuse */
-		mac_lo = readl(&cdev->macid0l);
-		mac_hi = readl(&cdev->macid0h);
-		mac_addr[0] = mac_hi & 0xFF;
-		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-		mac_addr[4] = mac_lo & 0xFF;
-		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
-		if (is_valid_ethaddr(mac_addr))
-			eth_env_set_enetaddr("ethaddr", mac_addr);
-		else
-			printf("Unable to read MAC address. Set <ethaddr>\n");
-	}
-
-	return cpsw_register(&cpsw_data);
-}