rockchip: rk3399: Support common spl_board_init

Support common spl_board_init by moving code from puma
board file into, common rk3399-board-spl.c.

Part of the code has sysreset-gpio, regulators_enable_boot_on
but right now only puma board is using this with relevant
config options rest remains common for all targets.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

3 files changed, 0 insertions, 74 deletions

diff --git a/board/rockchip/evb_rk3399/evb-rk3399.c b/board/rockchip/evb_rk3399/evb-rk3399.c
index 769b5d146f7..c600553ff61 100644
--- a/board/rockchip/evb_rk3399/evb-rk3399.c
+++ b/board/rockchip/evb_rk3399/evb-rk3399.c
@@ -8,7 +8,6 @@
 #include <dm/pinctrl.h>
 #include <asm/arch-rockchip/periph.h>
 #include <power/regulator.h>
-#include <spl.h>
 
 int board_init(void)
 {
@@ -64,10 +63,3 @@ int board_init(void)
 out:
 	return 0;
 }
-
-void spl_board_init(void)
-{
-	preloader_console_init();
-
-	return;
-}
diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
index c6b509c109c..251cd2d5667 100644
--- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
+++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
@@ -13,10 +13,8 @@
 #include <dm/pinctrl.h>
 #include <dm/uclass-internal.h>
 #include <asm/io.h>
-#include <asm/gpio.h>
 #include <asm/setup.h>
 #include <asm/arch-rockchip/clock.h>
-#include <asm/arch-rockchip/cru_rk3399.h>
 #include <asm/arch-rockchip/hardware.h>
 #include <asm/arch-rockchip/grf_rk3399.h>
 #include <asm/arch-rockchip/periph.h>
@@ -38,62 +36,6 @@ int board_init(void)
 	return 0;
 }
 
-static void rk3399_force_power_on_reset(void)
-{
-	ofnode node;
-	struct gpio_desc sysreset_gpio;
-
-	debug("%s: trying to force a power-on reset\n", __func__);
-
-	node = ofnode_path("/config");
-	if (!ofnode_valid(node)) {
-		debug("%s: no /config node?\n", __func__);
-		return;
-	}
-
-	if (gpio_request_by_name_nodev(node, "sysreset-gpio", 0,
-				       &sysreset_gpio, GPIOD_IS_OUT)) {
-		debug("%s: could not find a /config/sysreset-gpio\n", __func__);
-		return;
-	}
-
-	dm_gpio_set_value(&sysreset_gpio, 1);
-}
-
-void spl_board_init(void)
-{
-	int  ret;
-	struct rk3399_cru *cru = rockchip_get_cru();
-
-	/*
-	 * The RK3399 resets only 'almost all logic' (see also in the TRM
-	 * "3.9.4 Global software reset"), when issuing a software reset.
-	 * This may cause issues during boot-up for some configurations of
-	 * the application software stack.
-	 *
-	 * To work around this, we test whether the last reset reason was
-	 * a power-on reset and (if not) issue an overtemp-reset to reset
-	 * the entire module.
-	 *
-	 * While this was previously fixed by modifying the various places
-	 * that could generate a software reset (e.g. U-Boot's sysreset
-	 * driver, the ATF or Linux), we now have it here to ensure that
-	 * we no longer have to track this through the various components.
-	 */
-	if (cru->glb_rst_st != 0)
-		rk3399_force_power_on_reset();
-
-	/*
-	 * Turning the eMMC and SPI back on (if disabled via the Qseven
-	 * BIOS_ENABLE) signal is done through a always-on regulator).
-	 */
-	ret = regulators_enable_boot_on(false);
-	if (ret)
-		debug("%s: Cannot enable boot on regulator\n", __func__);
-
-	preloader_console_init();
-}
-
 static void setup_macaddr(void)
 {
 #if CONFIG_IS_ENABLED(CMD_NET)
diff --git a/board/vamrs/rock960_rk3399/rock960-rk3399.c b/board/vamrs/rock960_rk3399/rock960-rk3399.c
index 018e4b55b8f..2eb7120e84b 100644
--- a/board/vamrs/rock960_rk3399/rock960-rk3399.c
+++ b/board/vamrs/rock960_rk3399/rock960-rk3399.c
@@ -6,7 +6,6 @@
 #include <common.h>
 #include <dm.h>
 #include <power/regulator.h>
-#include <spl.h>
 
 int board_init(void)
 {
@@ -18,10 +17,3 @@ int board_init(void)
 
 	return 0;
 }
-
-void spl_board_init(void)
-{
-	preloader_console_init();
-
-	return;
-}