board: ti: AM57xx: Add detection logic for AM57xx-evm

Current AM57xx evm supports both BeagleBoard-X15
(http://beagleboard.org/x15) and AM57xx EVM
(http://www.ti.com/tool/tmdxevm5728).

The AM572x EValuation Module(EVM) provides an affordable platform to
quickly start evaluation of Sitara. ARM Cortex-A15 AM57x Processors
(AM5728, AM5726, AM5718, AM5716) and accelerate development for HMI,
machine vision, networking, medical imaging and many other industrial
applications. This EVM is based on the same BeagleBoard-X15 Chassis
and adds mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's
wlink8 offering.

Since the EEPROM contents are compatible between the BeagleBoard-X15 and
the AM57xx-evm, we add support for the detection logic to enable
support for various user programmable scripting capability.

NOTE: U-boot configuration is currently a superset of AM57xx evm and
BeagleBoard-X15 and no additional configuration tweaking is needed.

This change also sets up the stage for future support of TI AM57xx EVMs
to the same base bootloader build.

Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

2 files changed, 71 insertions, 1 deletions

diff --git a/board/ti/am57xx/Kconfig b/board/ti/am57xx/Kconfig
index bdb779511b6..17745ff7ea6 100644
--- a/board/ti/am57xx/Kconfig
+++ b/board/ti/am57xx/Kconfig
@@ -9,4 +9,6 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "am57xx_evm"
 
+source "board/ti/common/Kconfig"
+
 endif
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 042f9ab1965..d712ab0571e 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -30,8 +30,12 @@
 #include <dwc3-omap-uboot.h>
 #include <ti-usb-phy-uboot.h>
 
+#include "../common/board_detect.h"
 #include "mux_data.h"
 
+#define board_is_x15()		board_ti_is("BBRDX15_")
+#define board_is_am572x_evm()	board_ti_is("AM572PM_")
+
 #ifdef CONFIG_DRIVER_TI_CPSW
 #include <cpsw.h>
 #endif
@@ -41,8 +45,10 @@ DECLARE_GLOBAL_DATA_PTR;
 /* GPIO 7_11 */
 #define GPIO_DDR_VTT_EN 203
 
+#define SYSINFO_BOARD_NAME_MAX_LEN	45
+
 const struct omap_sysinfo sysinfo = {
-	"Board: BeagleBoard x15\n"
+	"Board: UNKNOWN(BeagleBoard X15?) REV UNKNOWN\n"
 };
 
 static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = {
@@ -246,6 +252,66 @@ struct vcores_data beagle_x15_volts = {
 	.iva.pmic		= &tps659038,
 };
 
+#ifdef CONFIG_SPL_BUILD
+/* No env to setup for SPL */
+static inline void setup_board_eeprom_env(void) { }
+
+/* Override function to read eeprom information */
+void do_board_detect(void)
+{
+	int rc;
+
+	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+				  CONFIG_EEPROM_CHIP_ADDRESS);
+	if (rc)
+		printf("ti_i2c_eeprom_init failed %d\n", rc);
+}
+
+#else	/* CONFIG_SPL_BUILD */
+
+/* Override function to read eeprom information: actual i2c read done by SPL*/
+void do_board_detect(void)
+{
+	char *bname = NULL;
+	int rc;
+
+	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+				  CONFIG_EEPROM_CHIP_ADDRESS);
+	if (rc)
+		printf("ti_i2c_eeprom_init failed %d\n", rc);
+
+	if (board_is_x15())
+		bname = "BeagleBoard X15";
+	else if (board_is_am572x_evm())
+		bname = "AM572x EVM";
+
+	if (bname)
+		snprintf(sysinfo.board_string, SYSINFO_BOARD_NAME_MAX_LEN,
+			 "Board: %s REV %s\n", bname, board_ti_get_rev());
+}
+
+static void setup_board_eeprom_env(void)
+{
+	char *name = "beagle_x15";
+	int rc;
+
+	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+				  CONFIG_EEPROM_CHIP_ADDRESS);
+	if (rc)
+		goto invalid_eeprom;
+
+	if (board_is_am572x_evm())
+		name = "am57xx_evm";
+	else
+		printf("Unidentified board claims %s in eeprom header\n",
+		       board_ti_get_name());
+
+invalid_eeprom:
+	set_board_info_env(name);
+}
+
+#endif	/* CONFIG_SPL_BUILD */
+
 void hw_data_init(void)
 {
 	*prcm = &dra7xx_prcm;
@@ -265,6 +331,8 @@ int board_init(void)
 int board_late_init(void)
 {
 	init_sata(0);
+	setup_board_eeprom_env();
+
 	/*
 	 * DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds
 	 * This is the POWERHOLD-in-Low behavior.