ARM: Various: Future-proof serial platdata

A few boards still use ns16550_platdata structures, but assume the structure
is going to be in a specific order. By explicitly naming each entry,
this should also help 'future-proof' in the event the structure changes.

Tested on the Logic PD Torpedo + Wireless.

I only changed a handful of devices that used the same syntax as the Logic
board.  Appologies if I missed one or stepped on toes.  Thanks to Derald Woods
and Alexander Graf.

Signed-off-by: Adam Ford <aford173@gmail.com>

V6: Add fix to arch/arm/cpu/armv7/am33xx/board.c

V5: Add fix to arch/arm/cpu/arm926ejs/lpc32xx/devices.c

V4: Fix subject heading

V3: Remove  reg_offset out in all the structs. It was reverted out, and and if
it did exist, it would get initialized to 0 by default.

V2: I hastily copy-pasted the boards without looking at the UART number.
This addresses 3 boards that use UART3 and not UART1.
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

7 files changed, 21 insertions, 21 deletions

diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index e2fce502080..d1a6a6f56f0 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -34,9 +34,9 @@ static const u32 gpmc_lan_config[] = {
 #endif
 
 static const struct ns16550_platdata igep_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(igep_uart) = {
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 668f68476e6..51d29875664 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -47,9 +47,9 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 
 static const struct ns16550_platdata omap3logic_serial = {
-	OMAP34XX_UART1,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART1,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(omap3logic_uart) = {
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
index 4040114ce0a..982619cd7bc 100644
--- a/board/logicpd/zoom1/zoom1.c
+++ b/board/logicpd/zoom1/zoom1.c
@@ -44,9 +44,9 @@ static const u32 gpmc_lab_enet[] = {
 };
 
 static const struct ns16550_platdata zoom1_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(zoom1_uart) = {
diff --git a/board/overo/overo.c b/board/overo/overo.c
index a38b959cb24..40f13e5876c 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -68,9 +68,9 @@ static struct {
 } expansion_config = {0x0};
 
 static const struct ns16550_platdata overo_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(overo_uart) = {
diff --git a/board/quipos/cairo/cairo.c b/board/quipos/cairo/cairo.c
index 21793e85c4d..77e4482906f 100644
--- a/board/quipos/cairo/cairo.c
+++ b/board/quipos/cairo/cairo.c
@@ -91,9 +91,9 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
 #endif
 
 static const struct ns16550_platdata cairo_serial = {
-	OMAP34XX_UART2,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART2,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(cairo_uart) = {
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index ff317efc2c7..0ed4f527715 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -73,9 +73,9 @@ static struct {
 } expansion_config;
 
 static const struct ns16550_platdata beagle_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(beagle_uart) = {
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index 1a447c77df2..965252f18df 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -46,9 +46,9 @@ static u32 gpmc_net_config[GPMC_MAX_REG] = {
 };
 
 static const struct ns16550_platdata devkit8000_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(devkit8000_uart) = {