ColdFire: Clean up checkpatch warnings for MCF52x2

Signed-off-by: Alison Wang <b18965@freescale.com>

5 files changed, 81 insertions, 65 deletions

diff --git a/board/freescale/m5208evbe/m5208evbe.c b/board/freescale/m5208evbe/m5208evbe.c
index 5f99e2f2442..355cfedfbed 100644
--- a/board/freescale/m5208evbe/m5208evbe.c
+++ b/board/freescale/m5208evbe/m5208evbe.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2000-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2008, 2012 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -27,6 +27,7 @@
 #include <config.h>
 #include <common.h>
 #include <asm/immap.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -39,7 +40,7 @@ int checkboard(void)
 
 phys_size_t initdram(int board_type)
 {
-	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+	sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
 	u32 dramsize, i;
 
 	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
@@ -50,34 +51,35 @@ phys_size_t initdram(int board_type)
 	}
 	i--;
 
-	sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
+	out_be32(&sdram->cs0, CONFIG_SYS_SDRAM_BASE | i);
 #ifdef CONFIG_SYS_SDRAM_BASE1
-	sdram->cs1 = (CONFIG_SYS_SDRAM_BASE | i);
+	out_be32(&sdram->cs1, CONFIG_SYS_SDRAM_BASE | i);
 #endif
-	sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
-	sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
+	out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1);
+	out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2);
 
 	udelay(500);
 
 	/* Issue PALL */
-	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+	out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
 	asm("nop");
 
 	/* Perform two refresh cycles */
-	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
-	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
+	out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
 	asm("nop");
 
 	/* Issue LEMR */
-	sdram->mode = CONFIG_SYS_SDRAM_MODE;
+	out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE);
 	asm("nop");
-	sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+	out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD);
 	asm("nop");
 
-	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+	out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
 	asm("nop");
 
-	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+	out_be32(&sdram->ctrl,
+		(CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00);
 	asm("nop");
 
 	udelay(100);
diff --git a/board/freescale/m5253demo/m5253demo.c b/board/freescale/m5253demo/m5253demo.c
index 8ffb2cc0447..052993da660 100644
--- a/board/freescale/m5253demo/m5253demo.c
+++ b/board/freescale/m5253demo/m5253demo.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2000-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
  * Hayden Fraser (Hayden.Fraser@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -109,7 +109,7 @@ int ide_preinit(void)
 
 void ide_set_reset(int idereset)
 {
-	volatile atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
+	atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
 	long period;
 	/*  t1,  t2,  t3,  t4,  t5,  t6,  t9, tRD,  tA */
 	int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35},	/* PIO 0 */
@@ -120,7 +120,8 @@ void ide_set_reset(int idereset)
 	};
 
 	if (idereset) {
-		ata->cr = 0;	/* control reset */
+		/* control reset */
+		out_8(&ata->cr, 0);
 		udelay(100);
 	} else {
 		mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
@@ -129,17 +130,19 @@ void ide_set_reset(int idereset)
 		period = 1000000000 / (CONFIG_SYS_CLK / 2);	/* period in ns */
 
 		/*ata->ton = CALC_TIMING (180); */
-		ata->t1 = CALC_TIMING(piotms[2][0]);
-		ata->t2w = CALC_TIMING(piotms[2][1]);
-		ata->t2r = CALC_TIMING(piotms[2][1]);
-		ata->ta = CALC_TIMING(piotms[2][8]);
-		ata->trd = CALC_TIMING(piotms[2][7]);
-		ata->t4 = CALC_TIMING(piotms[2][3]);
-		ata->t9 = CALC_TIMING(piotms[2][6]);
-
-		ata->cr = 0x40;	/* IORDY enable */
+		out_8(&ata->t1, CALC_TIMING(piotms[2][0]));
+		out_8(&ata->t2w, CALC_TIMING(piotms[2][1]));
+		out_8(&ata->t2r, CALC_TIMING(piotms[2][1]));
+		out_8(&ata->ta, CALC_TIMING(piotms[2][8]));
+		out_8(&ata->trd, CALC_TIMING(piotms[2][7]));
+		out_8(&ata->t4, CALC_TIMING(piotms[2][3]));
+		out_8(&ata->t9, CALC_TIMING(piotms[2][6]));
+
+		/* IORDY enable */
+		out_8(&ata->cr, 0x40);
 		udelay(2000);
-		ata->cr |= 0x01;	/* IORDY enable */
+		/* IORDY enable */
+		setbits_8(&ata->cr, 0x01);
 	}
 }
 #endif				/* CONFIG_CMD_IDE */
diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c
index ae69f67b482..658748b0dcf 100644
--- a/board/freescale/m5253evbe/m5253evbe.c
+++ b/board/freescale/m5253evbe/m5253evbe.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2000-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
  * Hayden Fraser (Hayden.Fraser@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -26,6 +26,7 @@
 
 #include <common.h>
 #include <asm/immap.h>
+#include <asm/io.h>
 
 int checkboard(void)
 {
@@ -101,7 +102,7 @@ int ide_preinit(void)
 
 void ide_set_reset(int idereset)
 {
-	volatile atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
+	atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
 	long period;
 	/*  t1,  t2,  t3,  t4,  t5,  t6,  t9, tRD,  tA */
 	int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35},	/* PIO 0 */
@@ -112,7 +113,8 @@ void ide_set_reset(int idereset)
 	};
 
 	if (idereset) {
-		ata->cr = 0;	/* control reset */
+		/* control reset */
+		out_8(&ata->cr, 0);
 		udelay(100);
 	} else {
 		mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
@@ -121,17 +123,19 @@ void ide_set_reset(int idereset)
 		period = 1000000000 / (CONFIG_SYS_CLK / 2);	/* period in ns */
 
 		/*ata->ton = CALC_TIMING (180); */
-		ata->t1 = CALC_TIMING(piotms[2][0]);
-		ata->t2w = CALC_TIMING(piotms[2][1]);
-		ata->t2r = CALC_TIMING(piotms[2][1]);
-		ata->ta = CALC_TIMING(piotms[2][8]);
-		ata->trd = CALC_TIMING(piotms[2][7]);
-		ata->t4 = CALC_TIMING(piotms[2][3]);
-		ata->t9 = CALC_TIMING(piotms[2][6]);
-
-		ata->cr = 0x40;	/* IORDY enable */
+		out_8(&ata->t1, CALC_TIMING(piotms[2][0]));
+		out_8(&ata->t2w, CALC_TIMING(piotms[2][1]));
+		out_8(&ata->t2r, CALC_TIMING(piotms[2][1]));
+		out_8(&ata->ta, CALC_TIMING(piotms[2][8]));
+		out_8(&ata->trd, CALC_TIMING(piotms[2][7]));
+		out_8(&ata->t4, CALC_TIMING(piotms[2][3]));
+		out_8(&ata->t9, CALC_TIMING(piotms[2][6]));
+
+		/* IORDY enable */
+		out_8(&ata->cr, 0x40);
 		udelay(2000);
-		ata->cr |= 0x01;	/* IORDY enable */
+		/* IORDY enable */
+		setbits_8(&ata->cr, 0x01);
 	}
 }
 #endif				/* CONFIG_CMD_IDE */
diff --git a/board/freescale/m5272c3/m5272c3.c b/board/freescale/m5272c3/m5272c3.c
index 902ca3aac67..c3160cef209 100644
--- a/board/freescale/m5272c3/m5272c3.c
+++ b/board/freescale/m5272c3/m5272c3.c
@@ -2,6 +2,8 @@
  * (C) Copyright 2000-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
+ * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -23,6 +25,7 @@
 
 #include <common.h>
 #include <asm/immap.h>
+#include <asm/io.h>
 
 
 int checkboard (void) {
@@ -32,10 +35,10 @@ int checkboard (void) {
 	};
 
 phys_size_t initdram (int board_type) {
-	volatile sdramctrl_t * sdp = (sdramctrl_t *)(MMAP_SDRAM);
+	sdramctrl_t * sdp = (sdramctrl_t *)(MMAP_SDRAM);
 
-	sdp->sdram_sdtr = 0xf539;
-	sdp->sdram_sdcr = 0x4211;
+	out_be16(&sdp->sdram_sdtr, 0xf539);
+	out_be16(&sdp->sdram_sdcr, 0x4211);
 
 	/* Dummy write to start SDRAM */
 	*((volatile unsigned long *)0) = 0;
diff --git a/board/freescale/m5275evb/m5275evb.c b/board/freescale/m5275evb/m5275evb.c
index 35c9b2018c1..1bbe5a33071 100644
--- a/board/freescale/m5275evb/m5275evb.c
+++ b/board/freescale/m5275evb/m5275evb.c
@@ -4,6 +4,8 @@
  *
  * Copyright (C) 2005-2008 Arthur Shipkowski (art@videon-central.com)
  *
+ * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -25,6 +27,7 @@
 
 #include <common.h>
 #include <asm/immap.h>
+#include <asm/io.h>
 
 #define PERIOD		13	/* system bus period in ns */
 #define SDRAM_TREFI	7800	/* in ns */
@@ -38,67 +41,68 @@ int checkboard(void)
 
 phys_size_t initdram(int board_type)
 {
-	volatile sdramctrl_t *sdp = (sdramctrl_t *)(MMAP_SDRAM);
-	volatile gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO);
+	sdramctrl_t *sdp = (sdramctrl_t *)(MMAP_SDRAM);
+	gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO);
 
-	gpio_reg->par_sdram = 0x3FF; /* Enable SDRAM */
+	/* Enable SDRAM */
+	out_be16(&gpio_reg->par_sdram, 0x3FF);
 
 	/* Set up chip select */
-	sdp->sdbar0 = CONFIG_SYS_SDRAM_BASE;
-	sdp->sdbmr0 = MCF_SDRAMC_SDMRn_BAM_32M | MCF_SDRAMC_SDMRn_V;
+	out_be32(&sdp->sdbar0, CONFIG_SYS_SDRAM_BASE);
+	out_be32(&sdp->sdbmr0, MCF_SDRAMC_SDMRn_BAM_32M | MCF_SDRAMC_SDMRn_V);
 
 	/* Set up timing */
-	sdp->sdcfg1 = 0x83711630;
-	sdp->sdcfg2 = 0x46770000;
+	out_be32(&sdp->sdcfg1, 0x83711630);
+	out_be32(&sdp->sdcfg2, 0x46770000);
 
 	/* Enable clock */
-	sdp->sdcr = MCF_SDRAMC_SDCR_MODE_EN | MCF_SDRAMC_SDCR_CKE;
+	out_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_MODE_EN | MCF_SDRAMC_SDCR_CKE);
 
 	/* Set precharge */
-	sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL;
+	setbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_IPALL);
 
 	/* Dummy write to start SDRAM */
 	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Send LEMR */
-	sdp->sdmr = MCF_SDRAMC_SDMR_BNKAD_LEMR
-			| MCF_SDRAMC_SDMR_AD(0x0)
-			| MCF_SDRAMC_SDMR_CMD;
+	setbits_be32(&sdp->sdmr,
+		MCF_SDRAMC_SDMR_BNKAD_LEMR | MCF_SDRAMC_SDMR_AD(0x0) |
+		MCF_SDRAMC_SDMR_CMD);
 	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Send LMR */
-	sdp->sdmr = 0x058d0000;
+	out_be32(&sdp->sdmr, 0x058d0000);
 	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Stop sending commands */
-	sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD);
+	clrbits_be32(&sdp->sdmr, MCF_SDRAMC_SDMR_CMD);
 
 	/* Set precharge */
-	sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL;
+	setbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_IPALL);
 	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Stop manual precharge, send 2 IREF */
-	sdp->sdcr &= ~(MCF_SDRAMC_SDCR_IPALL);
-	sdp->sdcr |= MCF_SDRAMC_SDCR_IREF;
+	clrbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_IPALL);
+	setbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_IREF);
 	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
-	/* Write mode register, clear reset DLL */
-	sdp->sdmr = 0x018d0000;
+
+	out_be32(&sdp->sdmr, 0x018d0000);
 	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Stop sending commands */
-	sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD);
-	sdp->sdcr &= ~(MCF_SDRAMC_SDCR_MODE_EN);
+	clrbits_be32(&sdp->sdmr, MCF_SDRAMC_SDMR_CMD);
+	clrbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_MODE_EN);
 
 	/* Turn on auto refresh, lock SDMR */
-	sdp->sdcr =
+	out_be32(&sdp->sdcr,
 		MCF_SDRAMC_SDCR_CKE
 		| MCF_SDRAMC_SDCR_REF
 		| MCF_SDRAMC_SDCR_MUX(1)
 		/* 1 added to round up */
 		| MCF_SDRAMC_SDCR_RCNT((SDRAM_TREFI/(PERIOD*64)) - 1 + 1)
-		| MCF_SDRAMC_SDCR_DQS_OE(0x3);
+		| MCF_SDRAMC_SDCR_DQS_OE(0x3));
 
 	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 };