diff options
| author | Tom Rini | 2013-12-10 17:15:18 -0500 |
|---|---|---|
| committer | Tom Rini | 2013-12-10 17:15:18 -0500 |
| commit | 4b210ad34282bfd9fc982a8e3c9a9126f4094cdb (patch) | |
| tree | f91ebdc46ede952728602d5ecc18e64ad0e52682 /board | |
| parent | 65b7fe28a12bbaccc7a0c076f5f9f213150030e7 (diff) | |
| parent | f15ea6e1d67782a1626d4a4922b6c20e380085e5 (diff) | |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
board/samsung/trats2/trats2.c
include/configs/exynos5250-dt.h
Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'board')
69 files changed, 4668 insertions, 1591 deletions
diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c index e2ae6fde6cb..63f7ad9a7ad 100644 --- a/board/BuS/vl_ma2sc/vl_ma2sc.c +++ b/board/BuS/vl_ma2sc/vl_ma2sc.c @@ -10,13 +10,13 @@ #include <common.h> #include <asm/sizes.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/arch/hardware.h> #include <asm/arch/clk.h> #include <asm/arch/at91_matrix.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_pio.h> -#include <asm/arch/at91_rstc.h> #include <asm/arch/at91sam9263.h> #include <asm/arch/gpio.h> #include <asm/arch/at91_common.h> @@ -66,35 +66,22 @@ static void vl_ma2sc_nand_hw_init(void) /* Configure RDY/BSY */ #ifdef CONFIG_SYS_NAND_READY_PIN - at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); + gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); #endif /* Enable NandFlash */ - at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif #ifdef CONFIG_MACB static void vl_ma2sc_macb_hw_init(void) { - unsigned long erstl; at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC; + /* Enable clock */ writel(1 << ATMEL_ID_EMAC, &pmc->pcer); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr); + at91_phy_reset(); at91_macb_hw_init(); } diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds index b0f09f592e2..4716e4f0e03 100644 --- a/board/actux1/u-boot.lds +++ b/board/actux1/u-boot.lds @@ -87,10 +87,13 @@ SECTIONS KEEP(*(.__bss_end)); } - /DISCARD/ : { *(.dynsym) } - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } + .dynsym _end : { *(.dynsym) } + .dynbss : { *(.dynbss) } + .dynstr : { *(.dynstr*) } + .dynamic : { *(.dynamic*) } + .hash : { *(.hash*) } + .plt : { *(.plt*) } + .interp : { *(.interp*) } + .gnu : { *(.gnu*) } + .ARM.exidx : { *(.ARM.exidx*) } } diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds index d84934e1f85..f00d7c72b1f 100644 --- a/board/actux2/u-boot.lds +++ b/board/actux2/u-boot.lds @@ -87,10 +87,13 @@ SECTIONS KEEP(*(.__bss_end)); } - /DISCARD/ : { *(.dynsym) } - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } + .dynsym _end : { *(.dynsym) } + .dynbss : { *(.dynbss) } + .dynstr : { *(.dynstr*) } + .dynamic : { *(.dynamic*) } + .hash : { *(.hash*) } + .plt : { *(.plt*) } + .interp : { *(.interp*) } + .gnu : { *(.gnu*) } + .ARM.exidx : { *(.ARM.exidx*) } } diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds index 30c204b6467..2de3ca60b58 100644 --- a/board/actux3/u-boot.lds +++ b/board/actux3/u-boot.lds @@ -87,10 +87,13 @@ SECTIONS KEEP(*(.__bss_end)); } - /DISCARD/ : { *(.dynsym) } - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } + .dynsym _end : { *(.dynsym) } + .dynbss : { *(.dynbss) } + .dynstr : { *(.dynstr*) } + .dynamic : { *(.dynamic*) } + .hash : { *(.hash*) } + .plt : { *(.plt*) } + .interp : { *(.interp*) } + .gnu : { *(.gnu*) } + .ARM.exidx : { *(.ARM.exidx*) } } diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c index e1b1c10d527..ea9575d4138 100644 --- a/board/afeb9260/afeb9260.c +++ b/board/afeb9260/afeb9260.c @@ -13,7 +13,6 @@ #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> #include <asm/io.h> #include <asm/arch/hardware.h> @@ -67,8 +66,6 @@ static void afeb9260_macb_hw_init(void) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; - unsigned long erstl; /* Enable EMAC clock */ @@ -94,20 +91,7 @@ static void afeb9260_macb_hw_init(void) pin_to_mask(AT91_PIN_PA28), &pioa->pudr); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, - &rstc->mr); - + at91_phy_reset(); /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PA14) | diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index 263de49c769..7f14af10112 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -12,7 +12,6 @@ #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> #include <atmel_mci.h> @@ -73,8 +72,6 @@ static void at91sam9260ek_macb_hw_init(void) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; - unsigned long erstl; /* Enable EMAC clock */ writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); @@ -98,21 +95,7 @@ static void at91sam9260ek_macb_hw_init(void) pin_to_mask(AT91_PIN_PA28), &pioa->pudr); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, - &rstc->mr); + at91_phy_reset(); /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PA14) | diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 2e9246f31cc..d42a1730cc3 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -12,7 +12,6 @@ #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> #include <asm/arch/at91_matrix.h> #include <asm/arch/at91_pio.h> #include <asm/arch/clk.h> @@ -82,10 +81,9 @@ static void at91sam9263ek_nand_hw_init(void) #ifdef CONFIG_MACB static void at91sam9263ek_macb_hw_init(void) { - unsigned long erstl; at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC; + /* Enable clock */ writel(1 << ATMEL_ID_EMAC, &pmc->pcer); @@ -97,23 +95,10 @@ static void at91sam9263ek_macb_hw_init(void) * * PHY has internal pull-down */ - writel(1 << 25, &pio->pioc.pudr); writel((1 << 25) | (1 <<26), &pio->pioe.pudr); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr); + at91_phy_reset(); /* Re-enable pull-up */ writel(1 << 25, &pio->pioc.puer); diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index 6a071f6b7d5..b7e2efd2fce 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -12,7 +12,6 @@ #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> #include <asm/arch/clk.h> #include <lcd.h> @@ -88,8 +87,6 @@ static void at91sam9m10g45ek_macb_hw_init(void) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; - unsigned long erstl; /* Enable clock */ writel(1 << ATMEL_ID_EMAC, &pmc->pcer); @@ -107,21 +104,7 @@ static void at91sam9m10g45ek_macb_hw_init(void) pin_to_mask(AT91_PIN_PA13), &pioa->pudr); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, - &rstc->mr); + at91_phy_reset(); /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PA15) | diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index 83fd63f5417..eff94a48b22 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -20,6 +20,9 @@ #include <micrel.h> #include <net.h> #include <netdev.h> +#include <spl.h> +#include <asm/arch/atmel_mpddrc.h> +#include <asm/arch/at91_wdt.h> #ifdef CONFIG_USB_GADGET_ATMEL_USBA #include <asm/arch/atmel_usba_udc.h> @@ -159,6 +162,12 @@ void lcd_show_board_info(void) int board_early_init_f(void) { + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOC); + at91_periph_clk_enable(ATMEL_ID_PIOD); + at91_periph_clk_enable(ATMEL_ID_PIOE); + at91_seriald_hw_init(); return 0; @@ -291,3 +300,85 @@ void spi_cs_deactivate(struct spi_slave *slave) } } #endif /* CONFIG_ATMEL_SPI */ + +/* SPL */ +#ifdef CONFIG_SPL_BUILD +void spl_board_init(void) +{ +#ifdef CONFIG_SYS_USE_MMC + sama5d3xek_mci_hw_init(); +#endif +} + +static void ddr2_conf(struct atmel_mpddr *ddr2) +{ + ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM); + + ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | + ATMEL_MPDDRC_CR_NR_ROW_14 | + ATMEL_MPDDRC_CR_CAS_DDR_CAS3 | + ATMEL_MPDDRC_CR_ENRDM_ON | + ATMEL_MPDDRC_CR_NB_8BANKS | + ATMEL_MPDDRC_CR_NDQS_DISABLED | + ATMEL_MPDDRC_CR_DECOD_INTERLEAVED | + ATMEL_MPDDRC_CR_UNAL_SUPPORTED); + /* + * As the DDR2-SDRAm device requires a refresh time is 7.8125us + * when DDR run at 133MHz, so it needs (7.8125us * 133MHz / 10^9) clocks + */ + ddr2->rtr = 0x411; + + ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | + 8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); + + ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET | + 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | + 28 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | + 26 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET); + + ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | + 7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | + 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); +} + +void mem_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct atmel_mpddr ddr2; + + ddr2_conf(&ddr2); + + /* enable MPDDR clock */ + at91_periph_clk_enable(ATMEL_ID_MPDDRC); + writel(0x4, &pmc->scer); + + /* DDRAM2 Controller initialize */ + ddr2_init(ATMEL_BASE_DDRCS, &ddr2); +} + +void at91_pmc_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 tmp; + + tmp = AT91_PMC_PLLAR_29 | + AT91_PMC_PLLXR_PLLCOUNT(0x3f) | + AT91_PMC_PLLXR_MUL(43) | + AT91_PMC_PLLXR_DIV(1); + at91_plla_init(tmp); + + writel(0x3 << 8, &pmc->pllicpr); + + tmp = AT91_PMC_MCKR_MDIV_4 | + AT91_PMC_MCKR_CSS_PLLA; + at91_mck_init(tmp); +} +#endif diff --git a/board/bluewater/snapper9260/snapper9260.c b/board/bluewater/snapper9260/snapper9260.c index 8a6919dbb13..bfde1291a59 100644 --- a/board/bluewater/snapper9260/snapper9260.c +++ b/board/bluewater/snapper9260/snapper9260.c @@ -14,7 +14,6 @@ #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> #include <net.h> #include <netdev.h> @@ -31,8 +30,6 @@ static void macb_hw_init(void) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; - unsigned long erstl; /* Enable clock */ writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); @@ -54,18 +51,7 @@ static void macb_hw_init(void) /* Enable ethernet power */ pca953x_set_val(0x28, IO_EXP_ETH_POWER, 0); - /* Need to reset PHY -> 500ms reset */ - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr); + at91_phy_reset(); /* Bring the ethernet out of reset */ pca953x_set_val(0x28, IO_EXP_ETH_RESET, 1); diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c index ecf261c1aec..2074a93a12c 100644 --- a/board/calao/sbc35_a9g20/sbc35_a9g20.c +++ b/board/calao/sbc35_a9g20/sbc35_a9g20.c @@ -15,7 +15,6 @@ #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) @@ -77,8 +76,6 @@ static void sbc35_a9g20_macb_hw_init(void) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; - unsigned long erstl; /* Enable EMAC clock */ writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); @@ -102,21 +99,7 @@ static void sbc35_a9g20_macb_hw_init(void) pin_to_mask(AT91_PIN_PA28), &pioa->pudr); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, - &rstc->mr); + at91_phy_reset(); /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PA14) | diff --git a/board/calao/usb_a9263/Makefile b/board/calao/usb_a9263/Makefile new file mode 100644 index 00000000000..8a22b3eac79 --- /dev/null +++ b/board/calao/usb_a9263/Makefile @@ -0,0 +1,14 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian@popies.net> +# Lead Tech Design <www.leadtechdesign.com> +# +# (C) Copyright 2013 +# Mateusz Kulikowski <mateusz.kulikowski@gmail.com> +# +# SPDX-License-Identifier: GPL-2.0+ + +obj-y += usb_a9263.o diff --git a/board/calao/usb_a9263/usb_a9263.c b/board/calao/usb_a9263/usb_a9263.c new file mode 100644 index 00000000000..266e9507ef2 --- /dev/null +++ b/board/calao/usb_a9263/usb_a9263.c @@ -0,0 +1,148 @@ +/* + * (C) Copyright 2007-2013 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com> + * Mateusz Kulikowski <mateusz.kulikowski@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_matrix.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm-generic/gpio.h> +#include <asm/io.h> +#include <net.h> +#include <netdev.h> +#include <dataflash.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_HAS_DATAFLASH +AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; + +struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ +}; + +/*define the area offsets*/ +dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { + {0x00000000, 0x00001FFF, FLAG_PROTECT_SET, 0, "Bootstrap"}, + {0x00002000, 0x00003FFF, FLAG_PROTECT_CLEAR, 0, "Environment"}, + {0x00004000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "U-Boot"}, +}; +#endif + +#ifdef CONFIG_CMD_NAND +static void usb_a9263_nand_hw_init(void) +{ + unsigned long csa; + at91_smc_t *smc = (at91_smc_t *)ATMEL_BASE_SMC0; + at91_matrix_t *matrix = (at91_matrix_t *)ATMEL_BASE_MATRIX; + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + + /* Enable CS3 */ + csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; + writel(csa, &matrix->csa[0]); + + /* Configure SMC CS3 for NAND/SmartMedia */ + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), + &smc->cs[3].pulse); + + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), + &smc->cs[3].cycle); + + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | + AT91_SMC_MODE_DBW_8 | + AT91_SMC_MODE_TDF_CYCLE(2), &smc->cs[3].mode); + + writel(1 << ATMEL_ID_PIOA | 1 << ATMEL_ID_PIOCDE, &pmc->pcer); + + /* Configure RDY/BSY */ + gpio_request(CONFIG_SYS_NAND_READY_PIN, "NAND ready/busy"); + gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); + + /* Enable NandFlash */ + gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "NAND enable"); + gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); +} +#endif + +#ifdef CONFIG_MACB +static void usb_a9263_macb_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + + /* Enable clock */ + writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + + /* + * Disable pull-up on: + * RXDV (PC25) => PHY normal mode (not Test mode) + * ERX0 (PE25) => PHY ADDR0 + * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0 + * + * PHY has internal weak pull-up/pull-down + */ + gpio_request(GPIO_PIN_PC(25), "PHY mode"); + gpio_direction_input(GPIO_PIN_PC(25)); + + gpio_request(GPIO_PIN_PE(25), "PHY ADDR0"); + gpio_direction_input(GPIO_PIN_PE(25)); + + gpio_request(GPIO_PIN_PE(26), "PHY ADDR1"); + gpio_direction_input(GPIO_PIN_PE(26)); + + at91_phy_reset(); + + /* It will set proper pinmux for ports PC25, PE25-26 */ + at91_macb_hw_init(); +} +#endif + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_CMD_NAND + usb_a9263_nand_hw_init(); +#endif +#ifdef CONFIG_HAS_DATAFLASH + at91_spi0_hw_init(1 << 0); +#endif +#ifdef CONFIG_MACB + usb_a9263_macb_hw_init(); +#endif +#ifdef CONFIG_USB_OHCI_NEW + at91_uhp_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} + +int board_eth_init(bd_t *bis) +{ + int rc = 0; + +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x0001); +#endif + return rc; +} diff --git a/board/compulab/cm_t335/Makefile b/board/compulab/cm_t335/Makefile new file mode 100644 index 00000000000..0e6e96e039d --- /dev/null +++ b/board/compulab/cm_t335/Makefile @@ -0,0 +1,10 @@ +# +# Copyright (C) 2013 Compulab Ltd - http://compulab.co.il/ +# +# Author: Ilya Ledvich <ilya@compulab.co.il> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += $(BOARD).o +obj-$(CONFIG_SPL_BUILD) += mux.o spl.o diff --git a/board/compulab/cm_t335/cm_t335.c b/board/compulab/cm_t335/cm_t335.c new file mode 100644 index 00000000000..01019e8eb2f --- /dev/null +++ b/board/compulab/cm_t335/cm_t335.c @@ -0,0 +1,162 @@ +/* + * Board functions for Compulab CM-T335 board + * + * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/ + * + * Author: Ilya Ledvich <ilya@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <miiphy.h> +#include <cpsw.h> + +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware_am33xx.h> +#include <asm/io.h> +#include <asm/gpio.h> + +#include "../common/eeprom.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + gpmc_init(); + +#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) + status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF); +#endif + return 0; +} + +#if defined (CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD) +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + return; +} + +static struct cpsw_slave_data cpsw_slave = { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 0, + .phy_if = PHY_INTERFACE_MODE_RGMII, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = &cpsw_slave, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +/* PHY reset GPIO */ +#define GPIO_PHY_RST GPIO_PIN(3, 7) + +static void board_phy_init(void) +{ + gpio_request(GPIO_PHY_RST, "phy_rst"); + gpio_direction_output(GPIO_PHY_RST, 0); + mdelay(2); + gpio_set_value(GPIO_PHY_RST, 1); + mdelay(2); +} + +static void get_efuse_mac_addr(uchar *enetaddr) +{ + uint32_t mac_hi, mac_lo; + struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + enetaddr[0] = mac_hi & 0xFF; + enetaddr[1] = (mac_hi & 0xFF00) >> 8; + enetaddr[2] = (mac_hi & 0xFF0000) >> 16; + enetaddr[3] = (mac_hi & 0xFF000000) >> 24; + enetaddr[4] = mac_lo & 0xFF; + enetaddr[5] = (mac_lo & 0xFF00) >> 8; +} + +/* + * Routine: handle_mac_address + * Description: prepare MAC address for on-board Ethernet. + */ +static int handle_mac_address(void) +{ + uchar enetaddr[6]; + int rv; + + rv = eth_getenv_enetaddr("ethaddr", enetaddr); + if (rv) + return 0; + + rv = cl_eeprom_read_mac_addr(enetaddr); + if (rv) + get_efuse_mac_addr(enetaddr); + + if (!is_valid_ether_addr(enetaddr)) + return -1; + + return eth_setenv_enetaddr("ethaddr", enetaddr); +} + +#define AR8051_PHY_DEBUG_ADDR_REG 0x1d +#define AR8051_PHY_DEBUG_DATA_REG 0x1e +#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5 +#define AR8051_RGMII_TX_CLK_DLY 0x100 + +int board_eth_init(bd_t *bis) +{ + int rv, n = 0; + const char *devname; + struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + + rv = handle_mac_address(); + if (rv) + printf("No MAC address found!\n"); + + writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel); + + board_phy_init(); + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + else + n += rv; + + /* + * CPSW RGMII Internal Delay Mode is not supported in all PVT + * operating points. So we must set the TX clock delay feature + * in the AR8051 PHY. Since we only support a single ethernet + * device, we only do this for the first instance. + */ + devname = miiphy_get_current_dev(); + + miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_ADDR_REG, + AR8051_DEBUG_RGMII_CLK_DLY_REG); + miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_DATA_REG, + AR8051_RGMII_TX_CLK_DLY); + return n; +} +#endif /* CONFIG_DRIVER_TI_CPSW && !CONFIG_SPL_BUILD */ diff --git a/board/compulab/cm_t335/mux.c b/board/compulab/cm_t335/mux.c new file mode 100644 index 00000000000..7d2beb01e55 --- /dev/null +++ b/board/compulab/cm_t335/mux.c @@ -0,0 +1,117 @@ +/* + * Pinmux configuration for Compulab CM-T335 board + * + * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/ + * + * Author: Ilya Ledvich <ilya@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, + {-1}, +}; + +static struct module_pin_mux uart1_pin_mux[] = { + {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, + {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, + {OFFSET(uart1_ctsn), (MODE(0) | PULLUP_EN | RXACTIVE)}, + {OFFSET(uart1_rtsn), (MODE(0) | PULLUDEN)}, + {-1}, +}; + +static struct module_pin_mux mmc0_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux i2c0_pin_mux[] = { + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)}, + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)}, + {-1}, +}; + +static struct module_pin_mux i2c1_pin_mux[] = { + /* I2C_DATA */ + {OFFSET(uart0_ctsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)}, + /* I2C_SCLK */ + {OFFSET(uart0_rtsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)}, + {-1}, +}; + +static struct module_pin_mux rgmii1_pin_mux[] = { + {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */ + {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */ + {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */ + {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */ + {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */ + {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */ + {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */ + {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */ + {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */ + {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */ + {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */ + {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; + +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ + {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ + {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ + {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ + {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ + {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ + {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ + {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ + {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ + {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ + {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ + {-1}, +}; + +static struct module_pin_mux eth_phy_rst_pin_mux[] = { + {OFFSET(emu0), (MODE(7) | PULLUDDIS)}, /* GPIO3_7 */ + {-1}, +}; + +static struct module_pin_mux status_led_pin_mux[] = { + {OFFSET(gpmc_csn3), (MODE(7) | PULLUDEN)}, /* GPIO2_0 */ + {-1}, +}; + +void set_uart_mux_conf(void) +{ + configure_module_pin_mux(uart0_pin_mux); + configure_module_pin_mux(uart1_pin_mux); +} + +void set_mux_conf_regs(void) +{ + configure_module_pin_mux(i2c0_pin_mux); + configure_module_pin_mux(i2c1_pin_mux); + configure_module_pin_mux(rgmii1_pin_mux); + configure_module_pin_mux(eth_phy_rst_pin_mux); + configure_module_pin_mux(mmc0_pin_mux); + configure_module_pin_mux(nand_pin_mux); + configure_module_pin_mux(status_led_pin_mux); +} diff --git a/board/compulab/cm_t335/spl.c b/board/compulab/cm_t335/spl.c new file mode 100644 index 00000000000..99f3a869bbc --- /dev/null +++ b/board/compulab/cm_t335/spl.c @@ -0,0 +1,106 @@ +/* + * SPL specific code for Compulab CM-T335 board + * + * Board functions for Compulab CM-T335 board + * + * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/ + * + * Author: Ilya Ledvich <ilya@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> + +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/clocks_am33xx.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware_am33xx.h> +#include <asm/sizes.h> + +static const struct ddr_data ddr3_data = { + .datardsratio0 = MT41J128MJT125_RD_DQS, + .datawdsratio0 = MT41J128MJT125_WR_DQS, + .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE, + .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA, +}; + +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = MT41J128MJT125_RATIO, + .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT, + + .cmd1csratio = MT41J128MJT125_RATIO, + .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT, + + .cmd2csratio = MT41J128MJT125_RATIO, + .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = MT41J128MJT125_EMIF_SDCFG, + .ref_ctrl = MT41J128MJT125_EMIF_SDREF, + .sdram_tim1 = MT41J128MJT125_EMIF_TIM1, + .sdram_tim2 = MT41J128MJT125_EMIF_TIM2, + .sdram_tim3 = MT41J128MJT125_EMIF_TIM3, + .zq_config = MT41J128MJT125_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY | + PHY_EN_DYN_PWRDN, +}; + +const struct dpll_params dpll_ddr = { +/* M N M2 M3 M4 M5 M6 */ + 303, (V_OSCK/1000000) - 1, 1, -1, -1, -1, -1}; + +void am33xx_spl_board_init(void) +{ + struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + + /* Get the frequency */ + dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); + + /* Set CORE Frequencies to OPP100 */ + do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); + + /* Set MPU Frequency to what we detected now that voltages are set */ + do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); +} + +const struct dpll_params *get_dpll_ddr_params(void) +{ + return &dpll_ddr; +} + +static void probe_sdram_size(long size) +{ + switch (size) { + case SZ_512M: + ddr3_emif_reg_data.sdram_config = MT41J256MJT125_EMIF_SDCFG; + break; + case SZ_256M: + ddr3_emif_reg_data.sdram_config = MT41J128MJT125_EMIF_SDCFG; + break; + case SZ_128M: + ddr3_emif_reg_data.sdram_config = MT41J64MJT125_EMIF_SDCFG; + break; + default: + puts("Failed configuring DRAM, resetting...\n\n"); + reset_cpu(0); + } + debug("%s: setting DRAM size to %ldM\n", __func__, size >> 20); + config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data, + &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); +} + +void sdram_init(void) +{ + long size = SZ_1G; + + do { + size = size / 2; + probe_sdram_size(size); + } while (get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, size) < size); + + return; +} diff --git a/board/compulab/cm_t335/u-boot.lds b/board/compulab/cm_t335/u-boot.lds new file mode 100644 index 00000000000..1b609a249ae --- /dev/null +++ b/board/compulab/cm_t335/u-boot.lds @@ -0,0 +1,101 @@ +/* + * Copyright (c) 2004-2008 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + *(.__image_copy_start) + CPUDIR/start.o (.text*) + board/compulab/cm_t335/built-in.o (.text*) + *(.text*) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { + *(.data*) + } + + . = ALIGN(4); + + . = .; + + . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } + + . = ALIGN(4); + + .image_copy_end : + { + *(.__image_copy_end) + } + + .rel_dyn_start : + { + *(.__rel_dyn_start) + } + + .rel.dyn : { + *(.rel*) + } + + .rel_dyn_end : + { + *(.__rel_dyn_end) + } + + _end = .; + + /* + * Deprecated: this MMU section is used by pxa at present but + * should not be used by new boards/CPUs. + */ + . = ALIGN(4096); + .mmutable : { + *(.mmutable) + } + +/* + * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c + * __bss_base and __bss_limit are for linker only (overlay ordering) + */ + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + __bss_base = .; + } + + .bss __bss_base (OVERLAY) : { + *(.bss*) + . = ALIGN(4); + __bss_limit = .; + } + + .bss_end __bss_limit (OVERLAY) : { + KEEP(*(.__bss_end)); + } + + /DISCARD/ : { *(.dynsym) } + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } +} diff --git a/board/compulab/cm_t35/Makefile b/board/compulab/cm_t35/Makefile index 6e2e1cbb6ad..ede250b5241 100644 --- a/board/compulab/cm_t35/Makefile +++ b/board/compulab/cm_t35/Makefile @@ -7,4 +7,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += cm_t35.o leds.o +obj-y += cm_t35.o diff --git a/board/compulab/cm_t35/leds.c b/board/compulab/cm_t35/leds.c deleted file mode 100644 index 7e2803e3b83..00000000000 --- a/board/compulab/cm_t35/leds.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * (C) Copyright 2011 - 2013 CompuLab, Ltd. <www.compulab.co.il> - * - * Author: Igor Grinberg <grinberg@compulab.co.il> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <status_led.h> -#include <asm/gpio.h> - -static unsigned int leds[] = { GREEN_LED_GPIO }; - -void __led_init(led_id_t mask, int state) -{ - if (gpio_request(leds[mask], "") != 0) { - printf("%s: failed requesting GPIO%u\n", __func__, leds[mask]); - return; - } - - gpio_direction_output(leds[mask], 0); -} - -void __led_set(led_id_t mask, int state) -{ - gpio_set_value(leds[mask], state == STATUS_LED_ON); -} - -void __led_toggle(led_id_t mask) -{ - gpio_set_value(leds[mask], !gpio_get_value(leds[mask])); -} diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds index 0035a0bf07d..ebcaf447b83 100644 --- a/board/dvlhost/u-boot.lds +++ b/board/dvlhost/u-boot.lds @@ -87,10 +87,13 @@ SECTIONS KEEP(*(.__bss_end)); } - /DISCARD/ : { *(.dynsym) } - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } + .dynsym _end : { *(.dynsym) } + .dynbss : { *(.dynbss) } + .dynstr : { *(.dynstr*) } + .dynamic : { *(.dynamic*) } + .hash : { *(.hash*) } + .plt : { *(.plt*) } + .interp : { *(.interp*) } + .gnu : { *(.gnu*) } + .ARM.exidx : { *(.ARM.exidx*) } } diff --git a/board/egnite/ethernut5/ethernut5.c b/board/egnite/ethernut5/ethernut5.c index 1f5eea56acb..b45213c245a 100644 --- a/board/egnite/ethernut5/ethernut5.c +++ b/board/egnite/ethernut5/ethernut5.c @@ -71,6 +71,7 @@ #include <asm/arch/at91_spi.h> #include <asm/arch/gpio.h> #include <asm/io.h> +#include <asm/gpio.h> #include "ethernut5_pwrman.h" @@ -141,7 +142,7 @@ static void ethernut5_nand_hw_init(void) /* Ready pin is optional. */ at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); #endif - at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c index 9bf67390811..c5994e0a4ae 100644 --- a/board/esd/meesc/meesc.c +++ b/board/esd/meesc/meesc.c @@ -12,6 +12,7 @@ #include <common.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> @@ -74,10 +75,10 @@ static void meesc_nand_hw_init(void) &smc->cs[3].mode); /* Configure RDY/BSY */ - at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); + gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); /* Enable NandFlash */ - at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif /* CONFIG_CMD_NAND */ diff --git a/board/esd/otc570/otc570.c b/board/esd/otc570/otc570.c index acc1b31b707..4751d0a9e99 100644 --- a/board/esd/otc570/otc570.c +++ b/board/esd/otc570/otc570.c @@ -12,6 +12,7 @@ #include <common.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> @@ -82,10 +83,10 @@ static void otc570_nand_hw_init(void) &smc->cs[3].mode); /* Configure RDY/BSY */ - at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); + gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); /* Enable NandFlash */ - at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif /* CONFIG_CMD_NAND */ diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c index 5e1524e07bb..01ecccb8c94 100644 --- a/board/eukrea/cpu9260/cpu9260.c +++ b/board/eukrea/cpu9260/cpu9260.c @@ -12,12 +12,12 @@ #include <common.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/arch/at91sam9260.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_matrix.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> #include <asm/arch/at91_pio.h> #include <asm/arch/clk.h> #include <asm/arch/hardware.h> @@ -79,39 +79,24 @@ static void cpu9260_nand_hw_init(void) writel(1 << ATMEL_ID_PIOC, &pmc->pcer); /* Configure RDY/BSY */ - at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); + gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); /* Enable NandFlash */ - at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif #ifdef CONFIG_MACB static void cpu9260_macb_hw_init(void) { - unsigned long rstcmr; at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC; /* Enable clock */ writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1); - rstcmr = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0xD) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | rstcmr | AT91_RSTC_MR_URSTEN, &rstc->mr); + at91_phy_reset(); at91_macb_hw_init(); } diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds index 8d5cc9101ae..1cca176c38d 100644 --- a/board/freescale/mx31ads/u-boot.lds +++ b/board/freescale/mx31ads/u-boot.lds @@ -90,13 +90,13 @@ SECTIONS KEEP(*(.__bss_end)); } - /DISCARD/ : { *(.bss*) } - /DISCARD/ : { *(.dynsym) } - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynsym*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.hash*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } + .dynsym _end : { *(.dynsym) } + .dynbss : { *(.dynbss) } + .dynstr : { *(.dynstr*) } + .dynamic : { *(.dynamic*) } + .hash : { *(.hash*) } + .plt : { *(.plt*) } + .interp : { *(.interp*) } + .gnu : { *(.gnu*) } + .ARM.exidx : { *(.ARM.exidx*) } } diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c index 0b8356dc47b..6a8ca2b4c39 100644 --- a/board/isee/igep0033/board.c +++ b/board/isee/igep0033/board.c @@ -35,20 +35,16 @@ static const struct ddr_data ddr3_data = { .datawdsratio0 = K4B2G1646EBIH9_WR_DQS, .datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE, .datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA, - .datadldiff0 = PHY_DLL_LOCK_DIFF, }; static const struct cmd_control ddr3_cmd_ctrl_data = { .cmd0csratio = K4B2G1646EBIH9_RATIO, - .cmd0dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF, .cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT, .cmd1csratio = K4B2G1646EBIH9_RATIO, - .cmd1dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF, .cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT, .cmd2csratio = K4B2G1646EBIH9_RATIO, - .cmd2dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF, .cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT, }; diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c index 034886ad5d9..68463e78dbf 100644 --- a/board/phytec/pcm051/board.c +++ b/board/phytec/pcm051/board.c @@ -49,25 +49,22 @@ const struct dpll_params *get_dpll_ddr_params(void) return &dpll_ddr; } +#ifdef CONFIG_REV1 static const struct ddr_data ddr3_data = { .datardsratio0 = MT41J256M8HX15E_RD_DQS, .datawdsratio0 = MT41J256M8HX15E_WR_DQS, .datafwsratio0 = MT41J256M8HX15E_PHY_FIFO_WE, .datawrsratio0 = MT41J256M8HX15E_PHY_WR_DATA, - .datadldiff0 = PHY_DLL_LOCK_DIFF, }; static const struct cmd_control ddr3_cmd_ctrl_data = { .cmd0csratio = MT41J256M8HX15E_RATIO, - .cmd0dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF, .cmd0iclkout = MT41J256M8HX15E_INVERT_CLKOUT, .cmd1csratio = MT41J256M8HX15E_RATIO, - .cmd1dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF, .cmd1iclkout = MT41J256M8HX15E_INVERT_CLKOUT, .cmd2csratio = MT41J256M8HX15E_RATIO, - .cmd2dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF, .cmd2iclkout = MT41J256M8HX15E_INVERT_CLKOUT, }; @@ -82,6 +79,48 @@ static struct emif_regs ddr3_emif_reg_data = { PHY_EN_DYN_PWRDN, }; +void sdram_init(void) +{ + config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data, + &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); +} +#else +static const struct ddr_data ddr3_data = { + .datardsratio0 = MT41K256M16HA125E_RD_DQS, + .datawdsratio0 = MT41K256M16HA125E_WR_DQS, + .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, + .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, +}; + +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = MT41K256M16HA125E_RATIO, + .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd1csratio = MT41K256M16HA125E_RATIO, + .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd2csratio = MT41K256M16HA125E_RATIO, + .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, + .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, + .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, + .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, + .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, + .zq_config = MT41K256M16HA125E_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY | + PHY_EN_DYN_PWRDN, +}; + +void sdram_init(void) +{ + config_ddr(DDR_CLK_MHZ, MT41K256M16HA125E_IOCTRL_VALUE, &ddr3_data, + &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); +} +#endif + void set_uart_mux_conf(void) { enable_uart0_pin_mux(); @@ -95,12 +134,6 @@ void set_mux_conf_regs(void) enable_board_pin_mux(); } - -void sdram_init(void) -{ - config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data, - &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); -} #endif /* diff --git a/board/renesas/koelsch/Makefile b/board/renesas/koelsch/Makefile new file mode 100644 index 00000000000..b4d0183b3b7 --- /dev/null +++ b/board/renesas/koelsch/Makefile @@ -0,0 +1,9 @@ +# +# board/renesas/koelsch/Makefile +# +# Copyright (C) 2013 Renesas Electronics Corporation +# +# SPDX-License-Identifier: GPL-2.0 +# + +obj-y := koelsch.o qos.o diff --git a/board/renesas/koelsch/koelsch.c b/board/renesas/koelsch/koelsch.c new file mode 100644 index 00000000000..7153f652b53 --- /dev/null +++ b/board/renesas/koelsch/koelsch.c @@ -0,0 +1,283 @@ +/* + * board/renesas/koelsch/koelsch.c + * + * Copyright (C) 2013 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0 + * + */ + +#include <common.h> +#include <malloc.h> +#include <asm/processor.h> +#include <asm/mach-types.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/arch/rmobile.h> +#include <i2c.h> +#include "qos.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define s_init_wait(cnt) \ + ({ \ + u32 i = 0x10000 * cnt; \ + while (i > 0) \ + i--; \ + }) + + +#define dbpdrgd_check(bsc) \ + ({ \ + while ((readl(&bsc->dbpdrgd) & 0x1) != 0x1) \ + ; \ + }) + +#if defined(CONFIG_NORFLASH) +static void bsc_init(void) +{ + struct r8a7791_lbsc *lbsc = (struct r8a7791_lbsc *)LBSC_BASE; + struct r8a7791_dbsc3 *dbsc3_0 = (struct r8a7791_dbsc3 *)DBSC3_0_BASE; + + /* LBSC */ + writel(0x00000020, &lbsc->cs0ctrl); + writel(0x00000020, &lbsc->cs1ctrl); + writel(0x00002020, &lbsc->ecs0ctrl); + writel(0x00002020, &lbsc->ecs1ctrl); + + writel(0x077F077F, &lbsc->cswcr0); + writel(0x077F077F, &lbsc->cswcr1); + writel(0x077F077F, &lbsc->ecswcr0); + writel(0x077F077F, &lbsc->ecswcr1); + + /* DBSC3 */ + s_init_wait(10); + + writel(0x0000A55A, &dbsc3_0->dbpdlck); + writel(0x00000001, &dbsc3_0->dbpdrga); + writel(0x80000000, &dbsc3_0->dbpdrgd); + writel(0x00000004, &dbsc3_0->dbpdrga); + dbpdrgd_check(dbsc3_0); + + writel(0x00000006, &dbsc3_0->dbpdrga); + writel(0x0001C000, &dbsc3_0->dbpdrgd); + + writel(0x00000023, &dbsc3_0->dbpdrga); + writel(0x00FD2480, &dbsc3_0->dbpdrgd); + + writel(0x00000010, &dbsc3_0->dbpdrga); + writel(0xF004649B, &dbsc3_0->dbpdrgd); + + writel(0x0000000F, &dbsc3_0->dbpdrga); + writel(0x00181EE4, &dbsc3_0->dbpdrgd); + + writel(0x0000000E, &dbsc3_0->dbpdrga); + writel(0x33C03812, &dbsc3_0->dbpdrgd); + + writel(0x00000003, &dbsc3_0->dbpdrga); + writel(0x0300C481, &dbsc3_0->dbpdrgd); + + writel(0x00000007, &dbsc3_0->dbkind); + writel(0x10030A02, &dbsc3_0->dbconf0); + writel(0x00000001, &dbsc3_0->dbphytype); + writel(0x00000000, &dbsc3_0->dbbl); + writel(0x0000000B, &dbsc3_0->dbtr0); + writel(0x00000008, &dbsc3_0->dbtr1); + writel(0x00000000, &dbsc3_0->dbtr2); + writel(0x0000000B, &dbsc3_0->dbtr3); + writel(0x000C000B, &dbsc3_0->dbtr4); + writel(0x00000027, &dbsc3_0->dbtr5); + writel(0x0000001C, &dbsc3_0->dbtr6); + writel(0x00000005, &dbsc3_0->dbtr7); + writel(0x00000018, &dbsc3_0->dbtr8); + writel(0x00000008, &dbsc3_0->dbtr9); + writel(0x0000000C, &dbsc3_0->dbtr10); + writel(0x00000009, &dbsc3_0->dbtr11); + writel(0x00000012, &dbsc3_0->dbtr12); + writel(0x000000D0, &dbsc3_0->dbtr13); + writel(0x00140005, &dbsc3_0->dbtr14); + writel(0x00050004, &dbsc3_0->dbtr15); + writel(0x70233005, &dbsc3_0->dbtr16); + writel(0x000C0000, &dbsc3_0->dbtr17); + writel(0x00000300, &dbsc3_0->dbtr18); + writel(0x00000040, &dbsc3_0->dbtr19); + writel(0x00000001, &dbsc3_0->dbrnk0); + writel(0x00020001, &dbsc3_0->dbadj0); + writel(0x20082008, &dbsc3_0->dbadj2); + writel(0x00020002, &dbsc3_0->dbwt0cnf0); + writel(0x0000000F, &dbsc3_0->dbwt0cnf4); + + writel(0x00000015, &dbsc3_0->dbpdrga); + writel(0x00000D70, &dbsc3_0->dbpdrgd); + + writel(0x00000016, &dbsc3_0->dbpdrga); + writel(0x00000006, &dbsc3_0->dbpdrgd); + + writel(0x00000017, &dbsc3_0->dbpdrga); + writel(0x00000018, &dbsc3_0->dbpdrgd); + + writel(0x00000012, &dbsc3_0->dbpdrga); + writel(0x9D5CBB66, &dbsc3_0->dbpdrgd); + + writel(0x00000013, &dbsc3_0->dbpdrga); + writel(0x1A868300, &dbsc3_0->dbpdrgd); + + writel(0x00000023, &dbsc3_0->dbpdrga); + writel(0x00FDB6C0, &dbsc3_0->dbpdrgd); + + writel(0x00000014, &dbsc3_0->dbpdrga); + writel(0x300214D8, &dbsc3_0->dbpdrgd); + + writel(0x0000001A, &dbsc3_0->dbpdrga); + writel(0x930035C7, &dbsc3_0->dbpdrgd); + + writel(0x00000060, &dbsc3_0->dbpdrga); + writel(0x330657B2, &dbsc3_0->dbpdrgd); + + writel(0x00000011, &dbsc3_0->dbpdrga); + writel(0x1000040B, &dbsc3_0->dbpdrgd); + + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x00000001, &dbsc3_0->dbpdrga); + writel(0x00000071, &dbsc3_0->dbpdrgd); + + writel(0x00000004, &dbsc3_0->dbpdrga); + dbpdrgd_check(dbsc3_0); + + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x2100FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + + writel(0x110000DB, &dbsc3_0->dbcmd); + + writel(0x00000001, &dbsc3_0->dbpdrga); + writel(0x00000181, &dbsc3_0->dbpdrgd); + + writel(0x00000004, &dbsc3_0->dbpdrga); + dbpdrgd_check(dbsc3_0); + + writel(0x00000001, &dbsc3_0->dbpdrga); + writel(0x0000FE01, &dbsc3_0->dbpdrgd); + + writel(0x00000004, &dbsc3_0->dbpdrga); + dbpdrgd_check(dbsc3_0); + + writel(0x00000000, &dbsc3_0->dbbs0cnt1); + writel(0x01004C20, &dbsc3_0->dbcalcnf); + writel(0x014000AA, &dbsc3_0->dbcaltr); + writel(0x00000140, &dbsc3_0->dbrfcnf0); + writel(0x00081860, &dbsc3_0->dbrfcnf1); + writel(0x00010000, &dbsc3_0->dbrfcnf2); + writel(0x00000001, &dbsc3_0->dbrfen); + writel(0x00000001, &dbsc3_0->dbacen); +} +#else +#define bsc_init() do {} while (0) +#endif /* CONFIG_NORFLASH */ + +void s_init(void) +{ + struct r8a7791_rwdt *rwdt = (struct r8a7791_rwdt *)RWDT_BASE; + struct r8a7791_swdt *swdt = (struct r8a7791_swdt *)SWDT_BASE; + + /* Watchdog init */ + writel(0xA5A5A500, &rwdt->rwtcsra); + writel(0xA5A5A500, &swdt->swtcsra); + + /* QoS */ + qos_init(); + + /* BSC */ + bsc_init(); +} + +#define MSTPSR1 0xE6150038 +#define SMSTPCR1 0xE6150134 +#define TMU0_MSTP125 (1 << 25) + +#define MSTPSR7 0xE61501C4 +#define SMSTPCR7 0xE615014C +#define SCIF0_MSTP721 (1 << 21) + +#define PMMR 0xE6060000 +#define GPSR4 0xE6060014 +#define IPSR14 0xE6060058 + +#define set_guard_reg(addr, mask, value) \ +{ \ + u32 val; \ + val = (readl(addr) & ~(mask)) | (value); \ + writel(~val, PMMR); \ + writel(val, addr); \ +} + +#define mstp_setbits(type, addr, saddr, set) \ + out_##type((saddr), in_##type(addr) | (set)) +#define mstp_clrbits(type, addr, saddr, clear) \ + out_##type((saddr), in_##type(addr) & ~(clear)) +#define mstp_setbits_le32(addr, saddr, set) \ + mstp_setbits(le32, addr, saddr, set) +#define mstp_clrbits_le32(addr, saddr, clear) \ + mstp_clrbits(le32, addr, saddr, clear) + +int board_early_init_f(void) +{ + mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); + +#if defined(CONFIG_NORFLASH) + /* SCIF0 */ + set_guard_reg(GPSR4, 0x34000000, 0x00000000); + set_guard_reg(IPSR14, 0x00000FC7, 0x00000481); + set_guard_reg(GPSR4, 0x00000000, 0x34000000); +#endif + + mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); + + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = KOELSCH_SDRAM_BASE + 0x100; + + /* Init PFC controller */ + r8a7791_pinmux_init(); + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + + return 0; +} + +const struct rmobile_sysinfo sysinfo = { + CONFIG_RMOBILE_BOARD_STRING +}; + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = KOELSCH_SDRAM_BASE; + gd->bd->bi_dram[0].size = KOELSCH_SDRAM_SIZE; +} + +int board_late_init(void) +{ + return 0; +} + +void reset_cpu(ulong addr) +{ +} diff --git a/board/renesas/koelsch/qos.c b/board/renesas/koelsch/qos.c new file mode 100644 index 00000000000..7f88f7da8d1 --- /dev/null +++ b/board/renesas/koelsch/qos.c @@ -0,0 +1,1220 @@ +/* + * board/renesas/koelsch/qos.c + * + * Copyright (C) 2013 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0 + * + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/mach-types.h> +#include <asm/io.h> +#include <asm/arch/rmobile.h> + +/* QoS version 0.23 */ + +enum { + DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04, + DBSC3_05, DBSC3_06, DBSC3_07, DBSC3_08, DBSC3_09, + DBSC3_10, DBSC3_11, DBSC3_12, DBSC3_13, DBSC3_14, + DBSC3_15, + DBSC3_NR, +}; + +static u32 dbsc3_0_r_qos_addr[DBSC3_NR] = { + [DBSC3_00] = DBSC3_0_QOS_R0_BASE, + [DBSC3_01] = DBSC3_0_QOS_R1_BASE, + [DBSC3_02] = DBSC3_0_QOS_R2_BASE, + [DBSC3_03] = DBSC3_0_QOS_R3_BASE, + [DBSC3_04] = DBSC3_0_QOS_R4_BASE, + [DBSC3_05] = DBSC3_0_QOS_R5_BASE, + [DBSC3_06] = DBSC3_0_QOS_R6_BASE, + [DBSC3_07] = DBSC3_0_QOS_R7_BASE, + [DBSC3_08] = DBSC3_0_QOS_R8_BASE, + [DBSC3_09] = DBSC3_0_QOS_R9_BASE, + [DBSC3_10] = DBSC3_0_QOS_R10_BASE, + [DBSC3_11] = DBSC3_0_QOS_R11_BASE, + [DBSC3_12] = DBSC3_0_QOS_R12_BASE, + [DBSC3_13] = DBSC3_0_QOS_R13_BASE, + [DBSC3_14] = DBSC3_0_QOS_R14_BASE, + [DBSC3_15] = DBSC3_0_QOS_R15_BASE, +}; + +static u32 dbsc3_0_w_qos_addr[DBSC3_NR] = { + [DBSC3_00] = DBSC3_0_QOS_W0_BASE, + [DBSC3_01] = DBSC3_0_QOS_W1_BASE, + [DBSC3_02] = DBSC3_0_QOS_W2_BASE, + [DBSC3_03] = DBSC3_0_QOS_W3_BASE, + [DBSC3_04] = DBSC3_0_QOS_W4_BASE, + [DBSC3_05] = DBSC3_0_QOS_W5_BASE, + [DBSC3_06] = DBSC3_0_QOS_W6_BASE, + [DBSC3_07] = DBSC3_0_QOS_W7_BASE, + [DBSC3_08] = DBSC3_0_QOS_W8_BASE, + [DBSC3_09] = DBSC3_0_QOS_W9_BASE, + [DBSC3_10] = DBSC3_0_QOS_W10_BASE, + [DBSC3_11] = DBSC3_0_QOS_W11_BASE, + [DBSC3_12] = DBSC3_0_QOS_W12_BASE, + [DBSC3_13] = DBSC3_0_QOS_W13_BASE, + [DBSC3_14] = DBSC3_0_QOS_W14_BASE, + [DBSC3_15] = DBSC3_0_QOS_W15_BASE, +}; + +static u32 dbsc3_1_r_qos_addr[DBSC3_NR] = { + [DBSC3_00] = DBSC3_1_QOS_R0_BASE, + [DBSC3_01] = DBSC3_1_QOS_R1_BASE, + [DBSC3_02] = DBSC3_1_QOS_R2_BASE, + [DBSC3_03] = DBSC3_1_QOS_R3_BASE, + [DBSC3_04] = DBSC3_1_QOS_R4_BASE, + [DBSC3_05] = DBSC3_1_QOS_R5_BASE, + [DBSC3_06] = DBSC3_1_QOS_R6_BASE, + [DBSC3_07] = DBSC3_1_QOS_R7_BASE, + [DBSC3_08] = DBSC3_1_QOS_R8_BASE, + [DBSC3_09] = DBSC3_1_QOS_R9_BASE, + [DBSC3_10] = DBSC3_1_QOS_R10_BASE, + [DBSC3_11] = DBSC3_1_QOS_R11_BASE, + [DBSC3_12] = DBSC3_1_QOS_R12_BASE, + [DBSC3_13] = DBSC3_1_QOS_R13_BASE, + [DBSC3_14] = DBSC3_1_QOS_R14_BASE, + [DBSC3_15] = DBSC3_1_QOS_R15_BASE, +}; + +static u32 dbsc3_1_w_qos_addr[DBSC3_NR] = { + [DBSC3_00] = DBSC3_1_QOS_W0_BASE, + [DBSC3_01] = DBSC3_1_QOS_W1_BASE, + [DBSC3_02] = DBSC3_1_QOS_W2_BASE, + [DBSC3_03] = DBSC3_1_QOS_W3_BASE, + [DBSC3_04] = DBSC3_1_QOS_W4_BASE, + [DBSC3_05] = DBSC3_1_QOS_W5_BASE, + [DBSC3_06] = DBSC3_1_QOS_W6_BASE, + [DBSC3_07] = DBSC3_1_QOS_W7_BASE, + [DBSC3_08] = DBSC3_1_QOS_W8_BASE, + [DBSC3_09] = DBSC3_1_QOS_W9_BASE, + [DBSC3_10] = DBSC3_1_QOS_W10_BASE, + [DBSC3_11] = DBSC3_1_QOS_W11_BASE, + [DBSC3_12] = DBSC3_1_QOS_W12_BASE, + [DBSC3_13] = DBSC3_1_QOS_W13_BASE, + [DBSC3_14] = DBSC3_1_QOS_W14_BASE, + [DBSC3_15] = DBSC3_1_QOS_W15_BASE, +}; + +void qos_init(void) +{ + int i; + struct r8a7791_s3c *s3c; + struct r8a7791_s3c_qos *s3c_qos; + struct r8a7791_dbsc3_qos *qos_addr; + struct r8a7791_mxi *mxi; + struct r8a7791_mxi_qos *mxi_qos; + struct r8a7791_axi_qos *axi_qos; + + /* DBSC DBADJ2 */ + writel(0x20042004, DBSC3_0_DBADJ2); + + /* S3C -QoS */ + s3c = (struct r8a7791_s3c *)S3C_BASE; + writel(0x00FF1B1D, &s3c->s3cadsplcr); + writel(0x1F0D0C0C, &s3c->s3crorr); + writel(0x1F0D0C0A, &s3c->s3cworr); + + /* QoS Control Registers */ + s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_CCI0_BASE; + writel(0x00890089, &s3c_qos->s3cqos0); + writel(0x20960010, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA2200, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960010, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA2200, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_CCI1_BASE; + writel(0x00890089, &s3c_qos->s3cqos0); + writel(0x20960010, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA2200, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960010, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA2200, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_MXI_BASE; + writel(0x00820082, &s3c_qos->s3cqos0); + writel(0x20960020, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA20DC, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960020, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA20DC, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_AXI_BASE; + writel(0x00820082, &s3c_qos->s3cqos0); + writel(0x20960020, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA20FA, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960020, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA20FA, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + /* DBSC -QoS */ + /* DBSC0 - Read */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_0_r_qos_addr[i]; + writel(0x00000002, &qos_addr->dblgcnt); + writel(0x00002096, &qos_addr->dbtmval0); + writel(0x00002064, &qos_addr->dbtmval1); + writel(0x00002032, &qos_addr->dbtmval2); + writel(0x00001FB0, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002078, &qos_addr->dbthres0); + writel(0x0000204B, &qos_addr->dbthres1); + writel(0x00001FE7, &qos_addr->dbthres2); + writel(0x00000001, &qos_addr->dblgqon); + } + + /* DBSC0 - Write */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_0_w_qos_addr[i]; + writel(0x00000002, &qos_addr->dblgcnt); + writel(0x000020EB, &qos_addr->dbtmval0); + writel(0x0000206E, &qos_addr->dbtmval1); + writel(0x00002050, &qos_addr->dbtmval2); + writel(0x0000203A, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002078, &qos_addr->dbthres0); + writel(0x0000205A, &qos_addr->dbthres1); + writel(0x0000203C, &qos_addr->dbthres2); + writel(0x00000001, &qos_addr->dblgqon); + } + + /* DBSC1 - Read */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_1_r_qos_addr[i]; + writel(0x00000002, &qos_addr->dblgcnt); + writel(0x00002096, &qos_addr->dbtmval0); + writel(0x00002064, &qos_addr->dbtmval1); + writel(0x00002032, &qos_addr->dbtmval2); + writel(0x00001FB0, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002078, &qos_addr->dbthres0); + writel(0x0000204B, &qos_addr->dbthres1); + writel(0x00001FE7, &qos_addr->dbthres2); + writel(0x00000001, &qos_addr->dblgqon); + } + + /* DBSC1 - Write */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_1_w_qos_addr[i]; + writel(0x00000002, &qos_addr->dblgcnt); + writel(0x000020EB, &qos_addr->dbtmval0); + writel(0x0000206E, &qos_addr->dbtmval1); + writel(0x00002050, &qos_addr->dbtmval2); + writel(0x0000203A, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002078, &qos_addr->dbthres0); + writel(0x0000205A, &qos_addr->dbthres1); + writel(0x0000203C, &qos_addr->dbthres2); + writel(0x00000001, &qos_addr->dblgqon); + } + + /* CCI-400 -QoS */ + writel(0x20001000, CCI_400_MAXOT_1); + writel(0x20001000, CCI_400_MAXOT_2); + writel(0x0000000C, CCI_400_QOSCNTL_1); + writel(0x0000000C, CCI_400_QOSCNTL_2); + + /* MXI -QoS */ + /* Transaction Control (MXI) */ + mxi = (struct r8a7791_mxi *)MXI_BASE; + writel(0x00000013, &mxi->mxrtcr); + writel(0x00000013, &mxi->mxwtcr); + writel(0x00780080, &mxi->mxsaar0); + writel(0x02000800, &mxi->mxsaar1); + + /* QoS Control (MXI) */ + mxi_qos = (struct r8a7791_mxi_qos *)MXI_QOS_BASE; + writel(0x0000000C, &mxi_qos->vspdu0); + writel(0x0000000C, &mxi_qos->vspdu1); + writel(0x0000000D, &mxi_qos->du0); + writel(0x0000000D, &mxi_qos->du1); + + /* AXI -QoS */ + /* Transaction Control (MXI) */ + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SYX64TO128_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_AVB_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_G2D_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMP0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002021, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMP1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002037, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMUX0_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMUX1_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMUX2_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_LBS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUDS_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUM_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MTSB0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002021, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MTSB1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002021, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_PCI_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_RTX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDS0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDS1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB20_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB21_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB22_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB30_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_AX2M_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_CC50_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002029, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_CCI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_CS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_DDM_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_ETH_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MPXM_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SAT0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SAT1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDM0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDM1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_TRAB_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_UDM0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_UDM1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (RT-AXI) */ + axi_qos = (struct r8a7791_axi_qos *)RT_AXI_SHX_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)RT_AXI_DBG_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)RT_AXI_RDM_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002299, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)RT_AXI_RDS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002029, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)RT_AXI_RTX64TO128_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)RT_AXI_STPRO_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002029, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)RT_AXI_SY2RT_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (MP-AXI) */ + axi_qos = (struct r8a7791_axi_qos *)MP_AXI_ADSP_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002037, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MP_AXI_ASDS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MP_AXI_ASDS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MP_AXI_MLP_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MP_AXI_MMUMP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MP_AXI_SPU_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MP_AXI_SPUC_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000206E, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (SYS-AXI256) */ + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_AXI128TO256_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_SYX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_MPX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_MXI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (CCI-AXI) */ + axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_SYX2_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUDS_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUM_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MXI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUMP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (Media-AXI) */ + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_MXR_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020DC, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x000020AA, &axi_qos->qosthres0); + writel(0x00002032, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_MXW_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020DC, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x000020AA, &axi_qos->qosthres0); + writel(0x00002032, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_JPR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_JPW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_TDMR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_TDMW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VIN0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMSR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMSW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMRR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMRW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD0R_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD0W_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD1R_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD1W_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_DU0R_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002063, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_DU0W_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002063, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0VR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0VW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VPC0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); +} diff --git a/board/renesas/koelsch/qos.h b/board/renesas/koelsch/qos.h new file mode 100644 index 00000000000..9a6c0461be9 --- /dev/null +++ b/board/renesas/koelsch/qos.h @@ -0,0 +1,12 @@ +/* + * Copyright (C) 2013 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __QOS_H__ +#define __QOS_H__ + +void qos_init(void); + +#endif diff --git a/board/renesas/lager/Makefile b/board/renesas/lager/Makefile new file mode 100644 index 00000000000..034c6f8c076 --- /dev/null +++ b/board/renesas/lager/Makefile @@ -0,0 +1,9 @@ +# +# board/renesas/lager/Makefile +# +# Copyright (C) 2013 Renesas Electronics Corporation +# +# SPDX-License-Identifier: GPL-2.0 +# + +obj-y := lager.o qos.o diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c new file mode 100644 index 00000000000..5c99fc9b58c --- /dev/null +++ b/board/renesas/lager/lager.c @@ -0,0 +1,287 @@ +/* + * board/renesas/lager/lager.c + * This file is lager board support. + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <malloc.h> +#include <netdev.h> +#include <asm/processor.h> +#include <asm/mach-types.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/arch/rmobile.h> +#include "qos.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define s_init_wait(cnt) \ + ({ \ + u32 i = 0x10000 * cnt; \ + while (i > 0) \ + i--; \ + }) + +#define dbpdrgd_check(bsc) \ + ({ \ + while ((readl(&bsc->dbpdrgd) & 0x1) != 0x1) \ + ; \ + }) + +#if defined(CONFIG_NORFLASH) +static void bsc_init(void) +{ + struct r8a7790_lbsc *lbsc = (struct r8a7790_lbsc *)LBSC_BASE; + struct r8a7790_dbsc3 *dbsc3_0 = (struct r8a7790_dbsc3 *)DBSC3_0_BASE; + + /* LBSC */ + writel(0x00000020, &lbsc->cs0ctrl); + writel(0x00000020, &lbsc->cs1ctrl); + writel(0x00002020, &lbsc->ecs0ctrl); + writel(0x00002020, &lbsc->ecs1ctrl); + + writel(0x077F077F, &lbsc->cswcr0); + writel(0x077F077F, &lbsc->cswcr1); + writel(0x077F077F, &lbsc->ecswcr0); + writel(0x077F077F, &lbsc->ecswcr1); + + /* DBSC3 */ + s_init_wait(10); + + writel(0x0000A55A, &dbsc3_0->dbpdlck); + writel(0x00000001, &dbsc3_0->dbpdrga); + writel(0x80000000, &dbsc3_0->dbpdrgd); + writel(0x00000004, &dbsc3_0->dbpdrga); + dbpdrgd_check(dbsc3_0); + + writel(0x00000006, &dbsc3_0->dbpdrga); + writel(0x0001C000, &dbsc3_0->dbpdrgd); + + writel(0x00000023, &dbsc3_0->dbpdrga); + writel(0x00FD2480, &dbsc3_0->dbpdrgd); + + writel(0x00000010, &dbsc3_0->dbpdrga); + writel(0xF004649B, &dbsc3_0->dbpdrgd); + + writel(0x0000000F, &dbsc3_0->dbpdrga); + writel(0x00181EE4, &dbsc3_0->dbpdrgd); + + writel(0x0000000E, &dbsc3_0->dbpdrga); + writel(0x33C03812, &dbsc3_0->dbpdrgd); + + writel(0x00000003, &dbsc3_0->dbpdrga); + writel(0x0300C481, &dbsc3_0->dbpdrgd); + + writel(0x00000007, &dbsc3_0->dbkind); + writel(0x10030A02, &dbsc3_0->dbconf0); + writel(0x00000001, &dbsc3_0->dbphytype); + writel(0x00000000, &dbsc3_0->dbbl); + writel(0x0000000B, &dbsc3_0->dbtr0); + writel(0x00000008, &dbsc3_0->dbtr1); + writel(0x00000000, &dbsc3_0->dbtr2); + writel(0x0000000B, &dbsc3_0->dbtr3); + writel(0x000C000B, &dbsc3_0->dbtr4); + writel(0x00000027, &dbsc3_0->dbtr5); + writel(0x0000001C, &dbsc3_0->dbtr6); + writel(0x00000005, &dbsc3_0->dbtr7); + writel(0x00000018, &dbsc3_0->dbtr8); + writel(0x00000008, &dbsc3_0->dbtr9); + writel(0x0000000C, &dbsc3_0->dbtr10); + writel(0x00000009, &dbsc3_0->dbtr11); + writel(0x00000012, &dbsc3_0->dbtr12); + writel(0x000000D0, &dbsc3_0->dbtr13); + writel(0x00140005, &dbsc3_0->dbtr14); + writel(0x00050004, &dbsc3_0->dbtr15); + writel(0x70233005, &dbsc3_0->dbtr16); + writel(0x000C0000, &dbsc3_0->dbtr17); + writel(0x00000300, &dbsc3_0->dbtr18); + writel(0x00000040, &dbsc3_0->dbtr19); + writel(0x00000001, &dbsc3_0->dbrnk0); + writel(0x00020001, &dbsc3_0->dbadj0); + writel(0x20082008, &dbsc3_0->dbadj2); + writel(0x00020002, &dbsc3_0->dbwt0cnf0); + writel(0x0000000F, &dbsc3_0->dbwt0cnf4); + + writel(0x00000015, &dbsc3_0->dbpdrga); + writel(0x00000D70, &dbsc3_0->dbpdrgd); + + writel(0x00000016, &dbsc3_0->dbpdrga); + writel(0x00000006, &dbsc3_0->dbpdrgd); + + writel(0x00000017, &dbsc3_0->dbpdrga); + writel(0x00000018, &dbsc3_0->dbpdrgd); + + writel(0x00000012, &dbsc3_0->dbpdrga); + writel(0x9D5CBB66, &dbsc3_0->dbpdrgd); + + writel(0x00000013, &dbsc3_0->dbpdrga); + writel(0x1A868300, &dbsc3_0->dbpdrgd); + + writel(0x00000023, &dbsc3_0->dbpdrga); + writel(0x00FDB6C0, &dbsc3_0->dbpdrgd); + + writel(0x00000014, &dbsc3_0->dbpdrga); + writel(0x300214D8, &dbsc3_0->dbpdrgd); + + writel(0x0000001A, &dbsc3_0->dbpdrga); + writel(0x930035C7, &dbsc3_0->dbpdrgd); + + writel(0x00000060, &dbsc3_0->dbpdrga); + writel(0x330657B2, &dbsc3_0->dbpdrgd); + + writel(0x00000011, &dbsc3_0->dbpdrga); + writel(0x1000040B, &dbsc3_0->dbpdrgd); + + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x00000001, &dbsc3_0->dbpdrga); + writel(0x00000071, &dbsc3_0->dbpdrgd); + + writel(0x00000004, &dbsc3_0->dbpdrga); + dbpdrgd_check(dbsc3_0); + + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x2100FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + writel(0x0000FA00, &dbsc3_0->dbcmd); + + writel(0x110000DB, &dbsc3_0->dbcmd); + + writel(0x00000001, &dbsc3_0->dbpdrga); + writel(0x00000181, &dbsc3_0->dbpdrgd); + + writel(0x00000004, &dbsc3_0->dbpdrga); + dbpdrgd_check(dbsc3_0); + + writel(0x00000001, &dbsc3_0->dbpdrga); + writel(0x0000FE01, &dbsc3_0->dbpdrgd); + + writel(0x00000004, &dbsc3_0->dbpdrga); + dbpdrgd_check(dbsc3_0); + + writel(0x00000000, &dbsc3_0->dbbs0cnt1); + writel(0x01004C20, &dbsc3_0->dbcalcnf); + writel(0x014000AA, &dbsc3_0->dbcaltr); + writel(0x00000140, &dbsc3_0->dbrfcnf0); + writel(0x00081860, &dbsc3_0->dbrfcnf1); + writel(0x00010000, &dbsc3_0->dbrfcnf2); + writel(0x00000001, &dbsc3_0->dbrfen); + writel(0x00000001, &dbsc3_0->dbacen); +} +#else +#define bsc_init() do {} while (0) +#endif /* CONFIG_NORFLASH */ + +void s_init(void) +{ + struct r8a7790_rwdt *rwdt = (struct r8a7790_rwdt *)RWDT_BASE; + struct r8a7790_swdt *swdt = (struct r8a7790_swdt *)SWDT_BASE; + + /* Watchdog init */ + writel(0xA5A5A500, &rwdt->rwtcsra); + writel(0xA5A5A500, &swdt->swtcsra); + + /* QoS(Quality-of-Service) Init */ + qos_init(); + + /* BSC init */ + bsc_init(); +} + +#define MSTPSR1 0xE6150038 +#define SMSTPCR1 0xE6150134 +#define TMU0_MSTP125 (1 << 25) + +#define MSTPSR7 0xE61501C4 +#define SMSTPCR7 0xE615014C +#define SCIF0_MSTP721 (1 << 21) + +#define PMMR 0xE6060000 +#define GPSR4 0xE6060014 +#define IPSR14 0xE6060058 + +#define set_guard_reg(addr, mask, value) \ +{ \ + u32 val; \ + val = (readl(addr) & ~(mask)) | (value); \ + writel(~val, PMMR); \ + writel(val, addr); \ +} + +#define mstp_setbits(type, addr, saddr, set) \ + out_##type((saddr), in_##type(addr) | (set)) +#define mstp_clrbits(type, addr, saddr, clear) \ + out_##type((saddr), in_##type(addr) & ~(clear)) +#define mstp_setbits_le32(addr, saddr, set) \ + mstp_setbits(le32, addr, saddr, set) +#define mstp_clrbits_le32(addr, saddr, clear) \ + mstp_clrbits(le32, addr, saddr, clear) + +int board_early_init_f(void) +{ + /* TMU0 */ + mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); + +#if defined(CONFIG_NORFLASH) + /* SCIF0 */ + set_guard_reg(GPSR4, 0x34000000, 0x00000000); + set_guard_reg(IPSR14, 0x00000FC7, 0x00000481); + set_guard_reg(GPSR4, 0x00000000, 0x34000000); +#endif + + mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); + + return 0; +} + +DECLARE_GLOBAL_DATA_PTR; +int board_init(void) +{ + /* board id for linux */ + gd->bd->bi_arch_number = MACH_TYPE_LAGER; + /* adress of boot parameters */ + gd->bd->bi_boot_params = LAGER_SDRAM_BASE + 0x100; + + /* Init PFC controller */ + r8a7790_pinmux_init(); + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + + return 0; +} + +const struct rmobile_sysinfo sysinfo = { + CONFIG_RMOBILE_BOARD_STRING +}; + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = LAGER_SDRAM_BASE; + gd->bd->bi_dram[0].size = LAGER_SDRAM_SIZE; +} + +int board_late_init(void) +{ + return 0; +} + +void reset_cpu(ulong addr) +{ +} diff --git a/board/renesas/lager/qos.c b/board/renesas/lager/qos.c new file mode 100644 index 00000000000..b88511a326c --- /dev/null +++ b/board/renesas/lager/qos.c @@ -0,0 +1,1119 @@ +/* + * board/renesas/lager/qos.c + * + * Copyright (C) 2013 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/mach-types.h> +#include <asm/io.h> +#include <asm/arch/rmobile.h> + +/* QoS version 0.954 */ + +enum { + DBSC3_R00, DBSC3_R01, DBSC3_R02, DBSC3_R03, DBSC3_R04, + DBSC3_R05, DBSC3_R06, DBSC3_R07, DBSC3_R08, DBSC3_R09, + DBSC3_R10, DBSC3_R11, DBSC3_R12, DBSC3_R13, DBSC3_R14, + DBSC3_R15, + DBSC3_W00, DBSC3_W01, DBSC3_W02, DBSC3_W03, DBSC3_W04, + DBSC3_W05, DBSC3_W06, DBSC3_W07, DBSC3_W08, DBSC3_W09, + DBSC3_W10, DBSC3_W11, DBSC3_W12, DBSC3_W13, DBSC3_W14, + DBSC3_W15, + DBSC3_NR, +}; + +static const u32 dbsc3_qos_addr[DBSC3_NR] = { + [DBSC3_R00] = DBSC3_0_QOS_R0_BASE, + [DBSC3_R01] = DBSC3_0_QOS_R1_BASE, + [DBSC3_R02] = DBSC3_0_QOS_R2_BASE, + [DBSC3_R03] = DBSC3_0_QOS_R3_BASE, + [DBSC3_R04] = DBSC3_0_QOS_R4_BASE, + [DBSC3_R05] = DBSC3_0_QOS_R5_BASE, + [DBSC3_R06] = DBSC3_0_QOS_R6_BASE, + [DBSC3_R07] = DBSC3_0_QOS_R7_BASE, + [DBSC3_R08] = DBSC3_0_QOS_R8_BASE, + [DBSC3_R09] = DBSC3_0_QOS_R9_BASE, + [DBSC3_R10] = DBSC3_0_QOS_R10_BASE, + [DBSC3_R11] = DBSC3_0_QOS_R11_BASE, + [DBSC3_R12] = DBSC3_0_QOS_R12_BASE, + [DBSC3_R13] = DBSC3_0_QOS_R13_BASE, + [DBSC3_R14] = DBSC3_0_QOS_R14_BASE, + [DBSC3_R15] = DBSC3_0_QOS_R15_BASE, + [DBSC3_W00] = DBSC3_0_QOS_W0_BASE, + [DBSC3_W01] = DBSC3_0_QOS_W1_BASE, + [DBSC3_W02] = DBSC3_0_QOS_W2_BASE, + [DBSC3_W03] = DBSC3_0_QOS_W3_BASE, + [DBSC3_W04] = DBSC3_0_QOS_W4_BASE, + [DBSC3_W05] = DBSC3_0_QOS_W5_BASE, + [DBSC3_W06] = DBSC3_0_QOS_W6_BASE, + [DBSC3_W07] = DBSC3_0_QOS_W7_BASE, + [DBSC3_W08] = DBSC3_0_QOS_W8_BASE, + [DBSC3_W09] = DBSC3_0_QOS_W9_BASE, + [DBSC3_W10] = DBSC3_0_QOS_W10_BASE, + [DBSC3_W11] = DBSC3_0_QOS_W11_BASE, + [DBSC3_W12] = DBSC3_0_QOS_W12_BASE, + [DBSC3_W13] = DBSC3_0_QOS_W13_BASE, + [DBSC3_W14] = DBSC3_0_QOS_W14_BASE, + [DBSC3_W15] = DBSC3_0_QOS_W15_BASE, +}; + +void qos_init(void) +{ + int i; + struct r8a7790_s3c *s3c; + struct r8a7790_s3c_qos *s3c_qos; + struct r8a7790_dbsc3_qos *qos_addr; + struct r8a7790_mxi *mxi; + struct r8a7790_mxi_qos *mxi_qos; + struct r8a7790_axi_qos *axi_qos; + + /* DBSC DBADJ2 */ + writel(0x20042004, DBSC3_0_DBADJ2); + + /* S3C -QoS */ + s3c = (struct r8a7790_s3c *)S3C_BASE; + writel(0x80FF1C1E, &s3c->s3cadsplcr); + writel(0x1F060505, &s3c->s3crorr); + writel(0x1F020100, &s3c->s3cworr); + + /* QoS Control Registers */ + s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_CCI0_BASE; + writel(0x00800080, &s3c_qos->s3cqos0); + writel(0x22000010, &s3c_qos->s3cqos1); + writel(0x22002200, &s3c_qos->s3cqos2); + writel(0x2F002200, &s3c_qos->s3cqos3); + writel(0x2F002F00, &s3c_qos->s3cqos4); + writel(0x22000010, &s3c_qos->s3cqos5); + writel(0x22002200, &s3c_qos->s3cqos6); + writel(0x2F002200, &s3c_qos->s3cqos7); + writel(0x2F002F00, &s3c_qos->s3cqos8); + + s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_CCI1_BASE; + writel(0x00800080, &s3c_qos->s3cqos0); + writel(0x22000010, &s3c_qos->s3cqos1); + writel(0x22002200, &s3c_qos->s3cqos2); + writel(0x2F002200, &s3c_qos->s3cqos3); + writel(0x2F002F00, &s3c_qos->s3cqos4); + writel(0x22000010, &s3c_qos->s3cqos5); + writel(0x22002200, &s3c_qos->s3cqos6); + writel(0x2F002200, &s3c_qos->s3cqos7); + writel(0x2F002F00, &s3c_qos->s3cqos8); + + s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_MXI_BASE; + writel(0x80918099, &s3c_qos->s3cqos0); + writel(0x20410010, &s3c_qos->s3cqos1); + writel(0x200A2023, &s3c_qos->s3cqos2); + writel(0x20502001, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20410FFF, &s3c_qos->s3cqos5); + writel(0x200A2023, &s3c_qos->s3cqos6); + writel(0x20502001, &s3c_qos->s3cqos7); + writel(0x20142032, &s3c_qos->s3cqos8); + + s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_AXI_BASE; + + writel(0x00810089, &s3c_qos->s3cqos0); + writel(0x20410001, &s3c_qos->s3cqos1); + writel(0x200A2023, &s3c_qos->s3cqos2); + writel(0x20502001, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20410FFF, &s3c_qos->s3cqos5); + writel(0x200A2023, &s3c_qos->s3cqos6); + writel(0x20502001, &s3c_qos->s3cqos7); + writel(0x20142032, &s3c_qos->s3cqos8); + + writel(0x00200808, &s3c->s3carcr11); + + /* DBSC -QoS */ + /* DBSC0 - Read/Write */ + for (i = DBSC3_R00; i < DBSC3_NR; i++) { + qos_addr = (struct r8a7790_dbsc3_qos *)dbsc3_qos_addr[i]; + writel(0x00000203, &qos_addr->dblgcnt); + writel(0x00002064, &qos_addr->dbtmval0); + writel(0x00002048, &qos_addr->dbtmval1); + writel(0x00002032, &qos_addr->dbtmval2); + writel(0x00002019, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002019, &qos_addr->dbthres0); + writel(0x00002019, &qos_addr->dbthres1); + writel(0x00002019, &qos_addr->dbthres2); + writel(0x00000000, &qos_addr->dblgqon); + } + /* CCI-400 -QoS */ + writel(0x20001000, CCI_400_MAXOT_1); + writel(0x20001000, CCI_400_MAXOT_2); + writel(0x0000000C, CCI_400_QOSCNTL_1); + writel(0x0000000C, CCI_400_QOSCNTL_2); + + /* MXI -QoS */ + /* Transaction Control (MXI) */ + mxi = (struct r8a7790_mxi *)MXI_BASE; + writel(0x00000013, &mxi->mxrtcr); + writel(0x00000013, &mxi->mxwtcr); + writel(0x00B800C0, &mxi->mxsaar0); + writel(0x02000800, &mxi->mxsaar1); + writel(0x00200000, &mxi->mxs3cracr); + writel(0x00200000, &mxi->mxs3cwacr); + writel(0x00200000, &mxi->mxaxiracr); + writel(0x00200000, &mxi->mxaxiwacr); + + /* QoS Control (MXI) */ + mxi_qos = (struct r8a7790_mxi_qos *)MXI_QOS_BASE; + writel(0x0000000C, &mxi_qos->vspdu0); + writel(0x0000000C, &mxi_qos->vspdu1); + writel(0x0000000D, &mxi_qos->du0); + writel(0x0000000D, &mxi_qos->du1); + + /* AXI -QoS */ + /* Transaction Control (MXI) */ + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_SYX64TO128_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_AVB_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200A, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_G2D_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200A, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMP0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002002, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMP1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMUX0_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMUX1_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMUX2_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_LBS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUDS_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUM_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MTSB0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002002, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MTSB1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002002, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_PCI_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_RTX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_SDS0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200A, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_SDS1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200A, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB20_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002005, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB21_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002005, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB22_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002005, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB30_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (RT-AXI) */ + axi_qos = (struct r8a7790_axi_qos *)RT_AXI_SHX_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002005, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)RT_AXI_RDS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)RT_AXI_RTX64TO128_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)RT_AXI_STPRO_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002003, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (MP-AXI) */ + axi_qos = (struct r8a7790_axi_qos *)MP_AXI_ADSP_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MP_AXI_ASDS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MP_AXI_ASDS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MP_AXI_MLP_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002002, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MP_AXI_MMUMP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MP_AXI_SPU_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MP_AXI_SPUC_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200D, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (SYS-AXI256) */ + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_AXI128TO256_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_SYX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_MPX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_MXI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (CCI-AXI) */ + axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_SYX2_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUDS_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUM_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MXI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUMP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (Media-AXI) */ + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_JPR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_JPW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_TDMR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_TDMW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VIN0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMSR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMSW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMRR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMRW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP2R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP2W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD0R_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD0W_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD1R_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD1W_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU0R_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU0W_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU1R_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU1W_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0VR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0VW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VPC0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1VR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1VW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VPC1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000000, &axi_qos->qosqon); +} diff --git a/board/renesas/lager/qos.h b/board/renesas/lager/qos.h new file mode 100644 index 00000000000..9a6c0461be9 --- /dev/null +++ b/board/renesas/lager/qos.h @@ -0,0 +1,12 @@ +/* + * Copyright (C) 2013 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __QOS_H__ +#define __QOS_H__ + +void qos_init(void); + +#endif diff --git a/board/ronetix/pm9261/led.c b/board/ronetix/pm9261/led.c index 223a5161797..cc4c2a072bb 100644 --- a/board/ronetix/pm9261/led.c +++ b/board/ronetix/pm9261/led.c @@ -8,9 +8,9 @@ */ #include <common.h> +#include <asm/gpio.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/gpio.h> -#include <asm/io.h> void coloured_LED_init(void) { @@ -19,11 +19,11 @@ void coloured_LED_init(void) /* Enable clock */ writel(1 << ATMEL_ID_PIOC, &pmc->pcer); - at91_set_pio_output(CONFIG_RED_LED, 1); - at91_set_pio_output(CONFIG_GREEN_LED, 1); - at91_set_pio_output(CONFIG_YELLOW_LED, 1); + gpio_direction_output(CONFIG_RED_LED, 1); + gpio_direction_output(CONFIG_GREEN_LED, 1); + gpio_direction_output(CONFIG_YELLOW_LED, 1); - at91_set_pio_value(CONFIG_RED_LED, 0); - at91_set_pio_value(CONFIG_GREEN_LED, 1); - at91_set_pio_value(CONFIG_YELLOW_LED, 1); + gpio_set_value(CONFIG_RED_LED, 0); + gpio_set_value(CONFIG_GREEN_LED, 1); + gpio_set_value(CONFIG_YELLOW_LED, 1); } diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c index a2a569b0cd9..a63438343ea 100644 --- a/board/ronetix/pm9261/pm9261.c +++ b/board/ronetix/pm9261/pm9261.c @@ -11,6 +11,7 @@ #include <common.h> #include <asm/sizes.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> @@ -73,10 +74,10 @@ static void pm9261_nand_hw_init(void) &pmc->pcer); /* Configure RDY/BSY */ - at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); + gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); /* Enable NandFlash */ - at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* NANDOE */ at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* NANDWE */ diff --git a/board/ronetix/pm9263/led.c b/board/ronetix/pm9263/led.c index 44e34309009..bfc2310b0e2 100644 --- a/board/ronetix/pm9263/led.c +++ b/board/ronetix/pm9263/led.c @@ -8,9 +8,9 @@ */ #include <common.h> +#include <asm/gpio.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/gpio.h> -#include <asm/io.h> void coloured_LED_init(void) { @@ -19,9 +19,9 @@ void coloured_LED_init(void) /* Enable clock */ writel(1 << ATMEL_ID_PIOB, &pmc->pcer); - at91_set_pio_output(CONFIG_RED_LED, 1); - at91_set_pio_output(CONFIG_GREEN_LED, 1); + gpio_direction_output(CONFIG_RED_LED, 1); + gpio_direction_output(CONFIG_GREEN_LED, 1); - at91_set_pio_value(CONFIG_RED_LED, 0); - at91_set_pio_value(CONFIG_GREEN_LED, 1); + gpio_set_value(CONFIG_RED_LED, 0); + gpio_set_value(CONFIG_GREEN_LED, 1); } diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index 48eba99d00e..3cedeef8ae6 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -11,6 +11,7 @@ #include <common.h> #include <asm/sizes.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> @@ -67,10 +68,10 @@ static void pm9263_nand_hw_init(void) &smc->cs[3].mode); /* Configure RDY/BSY */ - at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); + gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); /* Enable NandFlash */ - at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c index 5bb5a3c102d..c9f2747007d 100644 --- a/board/ronetix/pm9g45/pm9g45.c +++ b/board/ronetix/pm9g45/pm9g45.c @@ -14,6 +14,7 @@ #include <common.h> #include <asm/sizes.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> @@ -66,11 +67,11 @@ static void pm9g45_nand_hw_init(void) #ifdef CONFIG_SYS_NAND_READY_PIN /* Configure RDY/BSY */ - at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); + gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); #endif /* Enable NandFlash */ - at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 44be5fcaf99..8aba51c009f 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -504,6 +504,17 @@ int board_usb_init(int index, enum usb_init_type init) debug("USB_udc_probe\n"); return s3c_udc_probe(&s5pc210_otg_data); } + +#ifdef CONFIG_USB_CABLE_CHECK +int usb_cable_connected(void) +{ + struct pmic *muic = pmic_get("MAX8997_MUIC"); + if (!muic) + return 0; + + return !!muic->chrg->chrg_type(muic); +} +#endif #endif static void pmic_reset(void) diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c index 8df85ee3964..147de179cc6 100644 --- a/board/samsung/trats2/trats2.c +++ b/board/samsung/trats2/trats2.c @@ -25,6 +25,9 @@ #include <power/max77693_fg.h> #include <libtizen.h> #include <errno.h> +#include <usb.h> +#include <usb/s3c_udc.h> +#include <usb_mass_storage.h> DECLARE_GLOBAL_DATA_PTR; @@ -40,7 +43,7 @@ static void check_hw_revision(void) int modelrev = 0; int i; - gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE; + gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2(); /* * GPM1[1:0]: MODEL_REV[1:0] @@ -90,7 +93,7 @@ static inline u32 get_model_rev(void) static void board_external_gpio_init(void) { - gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE; + gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2(); /* * some pins which in alive block are connected with external pull-up @@ -117,8 +120,8 @@ static void board_init_i2c(void) { int err; - gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE; - gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE; + gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1(); + gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2(); /* I2C_7 */ err = exynos_pinmux_config(PERIPH_ID_I2C7, PINMUX_FLAG_NONE); @@ -170,7 +173,7 @@ static int pmic_init_max77686(void); int board_init(void) { struct exynos4_power *pwr = - (struct exynos4_power *)EXYNOS4X12_POWER_BASE; + (struct exynos4_power *)samsung_get_base_power(); gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; @@ -277,7 +280,7 @@ int board_mmc_init(bd_t *bis) { int err0, err2 = 0; - gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE; + gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2(); /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */ s5p_gpio_direction_output(&gpio2->k0, 2, 1); @@ -331,6 +334,95 @@ int board_mmc_init(bd_t *bis) return err0 & err2; } +#ifdef CONFIG_USB_GADGET +static int s5pc210_phy_control(int on) +{ + int ret = 0; + unsigned int val; + struct pmic *p, *p_pmic, *p_muic; + + p_pmic = pmic_get("MAX77686_PMIC"); + if (!p_pmic) + return -ENODEV; + + if (pmic_probe(p_pmic)) + return -1; + + p_muic = pmic_get("MAX77693_MUIC"); + if (!p_muic) + return -ENODEV; + + if (pmic_probe(p_muic)) + return -1; + + if (on) { + ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON); + if (ret) + return -1; + + p = pmic_get("MAX77693_PMIC"); + if (!p) + return -ENODEV; + + if (pmic_probe(p)) + return -1; + + /* SAFEOUT */ + ret = pmic_reg_read(p, MAX77693_SAFEOUT, &val); + if (ret) + return -1; + + val |= MAX77693_ENSAFEOUT1; + ret = pmic_reg_write(p, MAX77693_SAFEOUT, val); + if (ret) + return -1; + + /* PATH: USB */ + ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1, + MAX77693_MUIC_CTRL1_DN1DP2); + + } else { + ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM); + if (ret) + return -1; + + /* PATH: UART */ + ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1, + MAX77693_MUIC_CTRL1_UT1UR2); + } + + if (ret) + return -1; + + return 0; +} + +struct s3c_plat_otg_data s5pc210_otg_data = { + .phy_control = s5pc210_phy_control, + .regs_phy = EXYNOS4X12_USBPHY_BASE, + .regs_otg = EXYNOS4X12_USBOTG_BASE, + .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL, + .usb_flags = PHY0_SLEEP, +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + debug("USB_udc_probe\n"); + return s3c_udc_probe(&s5pc210_otg_data); +} + +#ifdef CONFIG_USB_CABLE_CHECK +int usb_cable_connected(void) +{ + struct pmic *muic = pmic_get("MAX77693_MUIC"); + if (!muic) + return 0; + + return !!muic->chrg->chrg_type(muic); +} +#endif +#endif + static int pmic_init_max77686(void) { struct pmic *p = pmic_get("MAX77686_PMIC"); @@ -444,7 +536,7 @@ void exynos_lcd_power_on(void) { struct pmic *p = pmic_get("MAX77686_PMIC"); - gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE; + gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1(); /* LCD_2.2V_EN: GPC0[1] */ s5p_gpio_set_pull(&gpio1->c0, 1, GPIO_PULL_UP); @@ -458,7 +550,7 @@ void exynos_lcd_power_on(void) void exynos_reset_lcd(void) { - gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE; + gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1(); /* reset lcd */ s5p_gpio_direction_output(&gpio1->f2, 1, 0); diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c index fbe79973e39..266dbbbb5f8 100644 --- a/board/siemens/common/factoryset.c +++ b/board/siemens/common/factoryset.c @@ -15,7 +15,8 @@ #include <asm/arch/sys_proto.h> #include <asm/unaligned.h> #include <net.h> -#include <usbdescriptors.h> +#include <errno.h> +#include <g_dnl.h> #include "factoryset.h" #define EEPR_PG_SZ 0x80 @@ -224,8 +225,20 @@ int factoryset_read_eeprom(int i2c_addr) MAX_STRING_LENGTH)) { debug("display name: %s\n", factory_dat.disp_name); } - #endif + if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV", + (uchar *)"num", factory_dat.serial, + MAX_STRING_LENGTH)) { + debug("serial number: %s\n", factory_dat.serial); + } + if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV", + (uchar *)"ver", buf, + MAX_STRING_LENGTH)) { + factory_dat.version = simple_strtoul((char *)buf, + NULL, 16); + debug("version number: %d\n", factory_dat.version); + } + return 0; err: @@ -279,6 +292,13 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) { put_unaligned(factory_dat.usb_vendor_id, &dev->idVendor); put_unaligned(factory_dat.usb_product_id, &dev->idProduct); + g_dnl_set_serialnumber((char *)factory_dat.serial); + return 0; } + +int g_dnl_get_board_bcd_device_number(int gcnum) +{ + return factory_dat.version; +} #endif /* defined(CONFIG_SPL_BUILD) */ diff --git a/board/siemens/common/factoryset.h b/board/siemens/common/factoryset.h index 445f3842da1..4d6de10f523 100644 --- a/board/siemens/common/factoryset.h +++ b/board/siemens/common/factoryset.h @@ -18,6 +18,8 @@ struct factorysetcontainer { #if defined(CONFIG_VIDEO) unsigned char disp_name[MAX_STRING_LENGTH]; #endif + unsigned char serial[MAX_STRING_LENGTH]; + int version; }; int factoryset_read_eeprom(int i2c_addr); diff --git a/board/siemens/corvus/Makefile b/board/siemens/corvus/Makefile new file mode 100644 index 00000000000..f3ebf77f1b2 --- /dev/null +++ b/board/siemens/corvus/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for siemens CORVUS (AT91SAM9G45) based board +# (C) Copyright 2013 Siemens AG +# +# Based on: +# U-Boot file: board/atmel/at91sam9m10g45ek/Makefile +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian@popies.net> +# Lead Tech Design <www.leadtechdesign.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += board.o diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c new file mode 100644 index 00000000000..f1e93ef0636 --- /dev/null +++ b/board/siemens/corvus/board.c @@ -0,0 +1,195 @@ +/* + * Board functions for Siemens CORVUS (AT91SAM9G45) based board + * (C) Copyright 2013 Siemens AG + * + * Based on: + * U-Boot file: board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91sam9g45_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/clk.h> +#include <lcd.h> +#include <atmel_lcdc.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <net.h> +#endif +#include <netdev.h> +#include <spi.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_CMD_NAND +static void corvus_nand_hw_init(void) +{ + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + unsigned long csa; + + /* Enable CS3 */ + csa = readl(&matrix->ebicsa); + csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA; + writel(csa, &matrix->ebicsa); + + /* Configure SMC CS3 for NAND/SmartMedia */ + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | +#ifdef CONFIG_SYS_NAND_DBW_16 + AT91_SMC_MODE_DBW_16 | +#else /* CONFIG_SYS_NAND_DBW_8 */ + AT91_SMC_MODE_DBW_8 | +#endif + AT91_SMC_MODE_TDF_CYCLE(3), + &smc->cs[3].mode); + + writel(1 << ATMEL_ID_PIOC, &pmc->pcer); + + /* Configure RDY/BSY */ + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); +} +#endif + +#ifdef CONFIG_CMD_USB +static void taurus_usb_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + writel(1 << ATMEL_ID_PIODE, &pmc->pcer); + + at91_set_gpio_output(AT91_PIN_PD1, 0); + at91_set_gpio_output(AT91_PIN_PD3, 0); +} +#endif + +#ifdef CONFIG_MACB +static void corvus_macb_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + /* Enable clock */ + writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + + /* + * Disable pull-up on: + * RXDV (PA15) => PHY normal mode (not Test mode) + * ERX0 (PA12) => PHY ADDR0 + * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0); + at91_set_pio_pullup(AT91_PIO_PORTA, 12, 0); + at91_set_pio_pullup(AT91_PIO_PORTA, 13, 0); + + at91_phy_reset(); + + /* Re-enable pull-up */ + at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1); + at91_set_pio_pullup(AT91_PIO_PORTA, 12, 1); + at91_set_pio_pullup(AT91_PIO_PORTA, 13, 1); + + /* And the pins. */ + at91_macb_hw_init(); +} +#endif + +int board_early_init_f(void) +{ + at91_seriald_hw_init(); + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_CMD_NAND + corvus_nand_hw_init(); +#endif +#ifdef CONFIG_ATMEL_SPI + at91_spi0_hw_init(1 << 4); +#endif +#ifdef CONFIG_HAS_DATAFLASH + at91_spi0_hw_init(1 << 0); +#endif +#ifdef CONFIG_MACB + corvus_macb_hw_init(); +#endif +#ifdef CONFIG_CMD_USB + taurus_usb_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00); +#endif + return rc; +} + +/* SPI chip select control */ +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs < 2; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + switch (slave->cs) { + case 1: + at91_set_gpio_output(AT91_PIN_PB18, 0); + break; + case 0: + default: + at91_set_gpio_output(AT91_PIN_PB3, 0); + break; + } +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + switch (slave->cs) { + case 1: + at91_set_gpio_output(AT91_PIN_PB18, 1); + break; + case 0: + default: + at91_set_gpio_output(AT91_PIN_PB3, 1); + break; + } +} diff --git a/board/siemens/dxr2/board.c b/board/siemens/dxr2/board.c index af9d84f1282..3a5e11dc816 100644 --- a/board/siemens/dxr2/board.c +++ b/board/siemens/dxr2/board.c @@ -38,11 +38,11 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_SPL_BUILD static struct dxr2_baseboard_id __attribute__((section(".data"))) settings; - +/* @303MHz-i0 */ const struct ddr3_data ddr3_default = { - 0x33524444, 0x56312e33, 0x0100, 0x0001, 0x003A, 0x008A, 0x010B, - 0x00C4, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x0006, 0x61C04AB2, - 0x00000618, + 0x33524444, 0x56312e34, 0x0080, 0x0000, 0x0038, 0x003E, 0x00A4, + 0x0075, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32, + 0x00000618, 0x0000014A, }; static void set_default_ddr3_timings(void) @@ -73,6 +73,7 @@ static void print_ddr3_timings(void) PRINTARGS(sdram_config); PRINTARGS(ref_ctrl); + PRINTARGS(ioctr_val); } static void print_chip_data(void) @@ -139,13 +140,9 @@ struct emif_regs dxr2_ddr3_emif_reg_data = { }; struct ddr_data dxr2_ddr3_data = { - .datadldiff0 = PHY_DLL_LOCK_DIFF, }; struct cmd_control dxr2_ddr3_cmd_ctrl_data = { - .cmd0dldiff = 0, - .cmd1dldiff = 0, - .cmd2dldiff = 0, }; /* pass values from eeprom */ dxr2_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1; @@ -168,7 +165,7 @@ struct cmd_control dxr2_ddr3_cmd_ctrl_data = { dxr2_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio; dxr2_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout; - config_ddr(DDR_PLL_FREQ, DXR2_IOCTRL_VAL, &dxr2_ddr3_data, + config_ddr(DDR_PLL_FREQ, settings.ddr3.ioctr_val, &dxr2_ddr3_data, &dxr2_ddr3_cmd_ctrl_data, &dxr2_ddr3_emif_reg_data, 0); } diff --git a/board/siemens/dxr2/board.h b/board/siemens/dxr2/board.h index 2be78fbab24..abf54323295 100644 --- a/board/siemens/dxr2/board.h +++ b/board/siemens/dxr2/board.h @@ -22,11 +22,11 @@ #define MAGIC_CHIP 0x50494843 /* Automatic generated definition */ -/* Wed, 19 Jun 2013 10:57:48 +0200 */ -/* From file: draco/ddr3-data-micron.txt */ +/* Wed, 18 Sep 2013 18:58:27 +0200 */ +/* From file: draco/ddr3-data-micron-v2.txt */ struct ddr3_data { unsigned int magic; /* 0x33524444 */ - unsigned int version; /* 0x56312e33 */ + unsigned int version; /* 0x56312e34 */ unsigned short int ddr3_sratio; /* 0x0100 */ unsigned short int iclkout; /* 0x0001 */ unsigned short int dt0rdsratio0; /* 0x003A */ @@ -36,9 +36,10 @@ struct ddr3_data { unsigned int sdram_tim1; /* 0x0888A39B */ unsigned int sdram_tim2; /* 0x26247FDA */ unsigned int sdram_tim3; /* 0x501F821F */ - unsigned short int emif_ddr_phy_ctlr_1; /* 0x0006 */ + unsigned int emif_ddr_phy_ctlr_1; /* 0x00100206 */ unsigned int sdram_config; /* 0x61C04AB2 */ unsigned int ref_ctrl; /* 0x00000618 */ + unsigned int ioctr_val; /* 0x0000018B */ }; struct chip_data { diff --git a/board/siemens/dxr2/mux.c b/board/siemens/dxr2/mux.c index bc80b79d7e9..5c22999bb8a 100644 --- a/board/siemens/dxr2/mux.c +++ b/board/siemens/dxr2/mux.c @@ -63,6 +63,164 @@ static struct module_pin_mux gpios_pin_mux[] = { {OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | RXACTIVE)}, {OFFSET(gpmc_csn3), MODE(7) }, /* LED0 GPIO2_0 */ {OFFSET(emu0), MODE(7)}, /* LED1 GPIO3_7 */ + /* Triacs in HW Rev 2 */ + {OFFSET(uart1_ctsn), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y5 GPIO0_12*/ + {OFFSET(mmc0_dat1), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y3 GPIO2_28*/ + {OFFSET(mmc0_dat2), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y7 GPIO2_27*/ + /* Triacs initial HW Rev */ + {OFFSET(gpmc_csn1), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_30 Y0 */ + {OFFSET(gpmc_be1n), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_28 Y1 */ + {OFFSET(gpmc_csn2), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_31 Y2 */ + {OFFSET(lcd_data15), MODE(7) | RXACTIVE | PULLUDDIS}, /* 0_11 Y3 */ + {OFFSET(lcd_data14), MODE(7) | RXACTIVE | PULLUDDIS}, /* 0_10 Y4 */ + {OFFSET(gpmc_clk), MODE(7) | RXACTIVE | PULLUDDIS}, /* 2_1 Y5 */ + {OFFSET(emu1), MODE(7) | RXACTIVE | PULLUDDIS}, /* 3_8 Y6 */ + {OFFSET(gpmc_ad15), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_15 Y7 */ + /* Remaining pins that were not used in this file */ + {OFFSET(gpmc_ad8), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_ad9), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a3), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a4), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a5), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a6), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a7), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a8), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a9), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a10), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a11), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data3), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data4), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data5), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data6), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data7), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data8), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data9), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_vsync), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_hsync), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_pclk), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_ac_bias_en), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mmc0_dat3), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mmc0_dat0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mmc0_clk), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mmc0_cmd), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(spi0_sclk), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(spi0_d0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(spi0_d1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(spi0_cs0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(uart0_ctsn), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(uart0_rtsn), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(uart1_rtsn), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(uart1_rxd), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(uart1_txd), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_aclkx), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_fsx), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_axr0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_ahclkr), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_aclkr), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_fsr), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_axr1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_ahclkx), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(xdma_event_intr0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(xdma_event_intr1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(nresetin_out), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(porz), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(nnmi), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(osc0_in), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(osc0_out), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(rsvd1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(tms), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(tdi), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(tdo), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(tck), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ntrst), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(osc1_in), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(osc1_out), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(pmic_power_en), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(rtc_porz), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(rsvd2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ext_wakeup), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(enz_kaldo_1p8v), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb0_dm), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb0_dp), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb0_ce), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb0_id), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb0_vbus), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb0_drvvbus), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb1_dm), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb1_dp), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb1_ce), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb1_id), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb1_vbus), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb1_drvvbus), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_resetn), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_csn0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_cke), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_ck), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_nck), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_casn), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_rasn), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_wen), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_ba0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_ba1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_ba2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a3), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a4), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a5), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a6), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a7), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a8), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a9), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a10), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a11), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a12), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a13), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a14), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a15), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_odt), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d3), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d4), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d5), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d6), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d7), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d8), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d9), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d10), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d11), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d12), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d13), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d14), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d15), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_dqm0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_dqm1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_dqs0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_dqsn0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_dqs1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_dqsn1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_vref), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_vtp), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_strben0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_strben1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain7), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain6), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain5), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain4), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain3), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(vrefp), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(vrefn), MODE(7) | RXACTIVE | PULLUDDIS}, {-1}, }; diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index 2c1841f8aed..0a25b4b40cc 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -58,19 +58,14 @@ struct ddr_data pxm2_ddr3_data = { .datawdsratio0 = 0, .datafwsratio0 = 0x8020080, .datawrsratio0 = 0x4010040, - .datauserank0delay = 1, - .datadldiff0 = PHY_DLL_LOCK_DIFF, }; struct cmd_control pxm2_ddr3_cmd_ctrl_data = { .cmd0csratio = 0x80, - .cmd0dldiff = 0, .cmd0iclkout = 0, .cmd1csratio = 0x80, - .cmd1dldiff = 0, .cmd1iclkout = 0, .cmd2csratio = 0x80, - .cmd2dldiff = 0, .cmd2iclkout = 0, }; @@ -413,8 +408,7 @@ static int conf_disp_pll(int m, int n) static int board_video_init(void) { - /* set 300 MHz */ - conf_disp_pll(25, 2); + conf_disp_pll(24, 1); if (factory_dat.pxm50) da8xx_video_init(&lcd_panels[0], &lcd_cfg, lcd_cfg.bpp); else diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c index 5de8fc6cbf0..77592dbba88 100644 --- a/board/siemens/rut/board.c +++ b/board/siemens/rut/board.c @@ -63,19 +63,14 @@ struct ddr_data rut_ddr3_data = { .datawdsratio0 = 0x85, .datafwsratio0 = 0x100, .datawrsratio0 = 0xc1, - .datauserank0delay = 1, - .datadldiff0 = PHY_DLL_LOCK_DIFF, }; struct cmd_control rut_ddr3_cmd_ctrl_data = { .cmd0csratio = 0x40, - .cmd0dldiff = 0, .cmd0iclkout = 1, .cmd1csratio = 0x40, - .cmd1dldiff = 0, .cmd1iclkout = 1, .cmd2csratio = 0x40, - .cmd2dldiff = 0, .cmd2iclkout = 1, }; @@ -83,9 +78,48 @@ struct cmd_control rut_ddr3_cmd_ctrl_data = { &rut_ddr3_cmd_ctrl_data, &rut_ddr3_emif_reg_data, 0); } +static int request_and_pulse_reset(int gpio, const char *name) +{ + int ret; + const int delay_us = 2000; /* 2ms */ + + ret = gpio_request(gpio, name); + if (ret < 0) { + printf("%s: Unable to request %s\n", __func__, name); + goto err; + } + + ret = gpio_direction_output(gpio, 0); + if (ret < 0) { + printf("%s: Unable to set %s as output\n", __func__, name); + goto err_free_gpio; + } + + udelay(delay_us); + + gpio_set_value(gpio, 1); + + return 0; + +err_free_gpio: + gpio_free(gpio); +err: + return ret; +} + +#define GPIO_TO_PIN(bank, gpio) (32 * (bank) + (gpio)) +#define ETH_PHY_RESET_GPIO GPIO_TO_PIN(2, 18) +#define MAXTOUCH_RESET_GPIO GPIO_TO_PIN(3, 18) +#define DISPLAY_RESET_GPIO GPIO_TO_PIN(3, 19) + +#define REQUEST_AND_PULSE_RESET(N) \ + request_and_pulse_reset(N, #N); + static void spl_siemens_board_init(void) { - return; + REQUEST_AND_PULSE_RESET(ETH_PHY_RESET_GPIO); + REQUEST_AND_PULSE_RESET(MAXTOUCH_RESET_GPIO); + REQUEST_AND_PULSE_RESET(DISPLAY_RESET_GPIO); } #endif /* if def CONFIG_SPL_BUILD */ @@ -336,7 +370,6 @@ int clk_get(int clk) static int conf_disp_pll(int m, int n) { struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; - struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; struct dpll_params dpll_lcd = {m, n, -1, -1, -1, -1, -1}; #if defined(DISPL_PLL_SPREAD_SPECTRUM) struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; @@ -353,8 +386,6 @@ static int conf_disp_pll(int m, int n) 0 }; do_enable_clocks(clk_domains, clk_modules_explicit_en, 1); - /* 0x44e0_0500 write lcdc pixel clock mux Linux hat hier 0 */ - writel(0x0, &cmdpll->clklcdcpixelclk); do_setup_dpll(&dpll_lcd_regs, &dpll_lcd); @@ -380,10 +411,13 @@ static int enable_lcd(void) { unsigned char buf[1]; + set_gpio(BOARD_LCD_RESET, 0); + mdelay(1); set_gpio(BOARD_LCD_RESET, 1); + mdelay(1); /* spi lcd init */ - kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_3); + kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_0); /* backlight on */ buf[0] = 0xf; @@ -418,7 +452,7 @@ static int board_video_init(void) printf("%s: %s not found, using default %s\n", __func__, factory_dat.disp_name, lcd_panels[i].name); } - conf_disp_pll(25, 2); + conf_disp_pll(24, 1); da8xx_video_init(&lcd_panels[display], &lcd_cfgs[display], lcd_cfgs[display].bpp); diff --git a/board/siemens/taurus/Makefile b/board/siemens/taurus/Makefile new file mode 100644 index 00000000000..a26fb92147f --- /dev/null +++ b/board/siemens/taurus/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for Siemens TAURUS (AT91SAM9G20) based board +# (C) Copyright 2013 Siemens AG +# +# Based on: +# U-Boot file: board/atmel/at91sam9260ek/Makefile +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian@popies.net> +# Lead Tech Design <www.leadtechdesign.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += taurus.o diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c new file mode 100644 index 00000000000..673b3029a66 --- /dev/null +++ b/board/siemens/taurus/taurus.c @@ -0,0 +1,160 @@ +/* + * Board functions for Siemens TAURUS (AT91SAM9G20) based boards + * (C) Copyright Siemens AG + * + * Based on: + * U-Boot file: board/atmel/at91sam9260ek/at91sam9260ek.c + * + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91sam9260_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91sam9_sdramc.h> +#include <atmel_mci.h> + +#include <net.h> +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_CMD_NAND +static void taurus_nand_hw_init(void) +{ + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; + unsigned long csa; + + /* Assign CS3 to NAND/SmartMedia Interface */ + csa = readl(&matrix->ebicsa); + csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA; + writel(csa, &matrix->ebicsa); + + /* Configure SMC CS3 for NAND/SmartMedia */ + writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(3), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | + AT91_SMC_MODE_DBW_8 | + AT91_SMC_MODE_TDF_CYCLE(3), + &smc->cs[3].mode); + + /* Configure RDY/BSY */ + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); +} +#endif + +#ifdef CONFIG_MACB +static void taurus_macb_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + /* Enable EMAC clock */ + writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + + /* + * Disable pull-up on: + * RXDV (PA17) => PHY normal mode (not Test mode) + * ERX0 (PA14) => PHY ADDR0 + * ERX1 (PA15) => PHY ADDR1 + * ERX2 (PA25) => PHY ADDR2 + * ERX3 (PA26) => PHY ADDR3 + * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + at91_set_pio_pullup(AT91_PIO_PORTA, 14, 0); + at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0); + at91_set_pio_pullup(AT91_PIO_PORTA, 17, 0); + at91_set_pio_pullup(AT91_PIO_PORTA, 25, 0); + at91_set_pio_pullup(AT91_PIO_PORTA, 26, 0); + at91_set_pio_pullup(AT91_PIO_PORTA, 28, 0); + + at91_phy_reset(); + + at91_set_gpio_input(AT91_PIN_PA25, 1); /* ERST tri-state */ + + /* Re-enable pull-up */ + at91_set_pio_pullup(AT91_PIO_PORTA, 14, 1); + at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1); + at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1); + at91_set_pio_pullup(AT91_PIO_PORTA, 25, 1); + at91_set_pio_pullup(AT91_PIO_PORTA, 26, 1); + at91_set_pio_pullup(AT91_PIO_PORTA, 28, 1); + + /* Initialize EMAC=MACB hardware */ + at91_macb_hw_init(); +} +#endif + +#ifdef CONFIG_GENERIC_ATMEL_MCI +int board_mmc_init(bd_t *bd) +{ + at91_mci_hw_init(); + + return atmel_mci_init((void *)ATMEL_BASE_MCI); +} +#endif + +int board_early_init_f(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + /* Enable clocks for all PIOs */ + writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | + (1 << ATMEL_ID_PIOC), + &pmc->pcer); + + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + at91_seriald_hw_init(); +#ifdef CONFIG_CMD_NAND + taurus_nand_hw_init(); +#endif +#ifdef CONFIG_MACB + taurus_macb_hw_init(); +#endif + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00); +#endif + return rc; +} diff --git a/board/taskit/stamp9g20/stamp9g20.c b/board/taskit/stamp9g20/stamp9g20.c index 704a63bad88..27cdf77f012 100644 --- a/board/taskit/stamp9g20/stamp9g20.c +++ b/board/taskit/stamp9g20/stamp9g20.c @@ -19,7 +19,6 @@ #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> #include <watchdog.h> @@ -67,8 +66,6 @@ static void stamp9G20_nand_hw_init(void) static void stamp9G20_macb_hw_init(void) { struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; - unsigned long erstl; /* Enable the PHY Chip via PA26 on the Stamp 2 Adaptor */ at91_set_gpio_output(AT91_PIN_PA26, 0); @@ -91,33 +88,7 @@ static void stamp9G20_macb_hw_init(void) pin_to_mask(AT91_PIN_PA28), &pioa->pudr); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | (AT91_RSTC_MR_ERSTL(13) & - ~AT91_RSTC_MR_URSTEN), &rstc->mr); - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end of hardware reset */ - unsigned long start = get_timer(0); - unsigned long timeout = 1000; /* 1000ms */ - - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) { - - /* avoid shutdown by watchdog */ - WATCHDOG_RESET(); - mdelay(10); - - /* timeout for not getting stuck in an endless loop */ - if (get_timer(start) >= timeout) { - puts("*** ERROR: Timeout waiting for PHY reset!\n"); - break; - }; - }; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, - &rstc->mr); + at91_phy_reset(); /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PA14) | diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index db225ce1d9f..33693e4ead5 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -107,21 +107,16 @@ static const struct ddr_data ddr2_data = { (MT47H128M16RT25E_PHY_WR_DATA<<20) | (MT47H128M16RT25E_PHY_WR_DATA<<10) | (MT47H128M16RT25E_PHY_WR_DATA<<0)), - .datauserank0delay = MT47H128M16RT25E_PHY_RANK0_DELAY, - .datadldiff0 = PHY_DLL_LOCK_DIFF, }; static const struct cmd_control ddr2_cmd_ctrl_data = { .cmd0csratio = MT47H128M16RT25E_RATIO, - .cmd0dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT, .cmd1csratio = MT47H128M16RT25E_RATIO, - .cmd1dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT, .cmd2csratio = MT47H128M16RT25E_RATIO, - .cmd2dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT, }; @@ -139,7 +134,6 @@ static const struct ddr_data ddr3_data = { .datawdsratio0 = MT41J128MJT125_WR_DQS, .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE, .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA, - .datadldiff0 = PHY_DLL_LOCK_DIFF, }; static const struct ddr_data ddr3_beagleblack_data = { @@ -147,7 +141,6 @@ static const struct ddr_data ddr3_beagleblack_data = { .datawdsratio0 = MT41K256M16HA125E_WR_DQS, .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, - .datadldiff0 = PHY_DLL_LOCK_DIFF, }; static const struct ddr_data ddr3_evm_data = { @@ -155,48 +148,38 @@ static const struct ddr_data ddr3_evm_data = { .datawdsratio0 = MT41J512M8RH125_WR_DQS, .datafwsratio0 = MT41J512M8RH125_PHY_FIFO_WE, .datawrsratio0 = MT41J512M8RH125_PHY_WR_DATA, - .datadldiff0 = PHY_DLL_LOCK_DIFF, }; static const struct cmd_control ddr3_cmd_ctrl_data = { .cmd0csratio = MT41J128MJT125_RATIO, - .cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF, .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT, .cmd1csratio = MT41J128MJT125_RATIO, - .cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF, .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT, .cmd2csratio = MT41J128MJT125_RATIO, - .cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF, .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT, }; static const struct cmd_control ddr3_beagleblack_cmd_ctrl_data = { .cmd0csratio = MT41K256M16HA125E_RATIO, - .cmd0dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF, .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, .cmd1csratio = MT41K256M16HA125E_RATIO, - .cmd1dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF, .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, .cmd2csratio = MT41K256M16HA125E_RATIO, - .cmd2dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF, .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, }; static const struct cmd_control ddr3_evm_cmd_ctrl_data = { .cmd0csratio = MT41J512M8RH125_RATIO, - .cmd0dldiff = MT41J512M8RH125_DLL_LOCK_DIFF, .cmd0iclkout = MT41J512M8RH125_INVERT_CLKOUT, .cmd1csratio = MT41J512M8RH125_RATIO, - .cmd1dldiff = MT41J512M8RH125_DLL_LOCK_DIFF, .cmd1iclkout = MT41J512M8RH125_INVERT_CLKOUT, .cmd2csratio = MT41J512M8RH125_RATIO, - .cmd2dldiff = MT41J512M8RH125_DLL_LOCK_DIFF, .cmd2iclkout = MT41J512M8RH125_INVERT_CLKOUT, }; diff --git a/board/ti/am335x/u-boot.lds b/board/ti/am335x/u-boot.lds index e77a501f567..6a734b30aca 100644 --- a/board/ti/am335x/u-boot.lds +++ b/board/ti/am335x/u-boot.lds @@ -108,10 +108,13 @@ SECTIONS KEEP(*(.__bss_end)); } - /DISCARD/ : { *(.dynsym) } - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } + .dynsym _end : { *(.dynsym) } + .dynbss : { *(.dynbss) } + .dynstr : { *(.dynstr*) } + .dynamic : { *(.dynamic*) } + .hash : { *(.hash*) } + .plt : { *(.plt*) } + .interp : { *(.interp*) } + .gnu : { *(.gnu*) } + .ARM.exidx : { *(.ARM.exidx*) } } diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 9657c75f235..9ae88c57a41 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -14,6 +14,7 @@ #include <palmas.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mmc_host_def.h> +#include <asm/arch/sata.h> #include "mux_data.h" @@ -77,6 +78,12 @@ int board_init(void) return 0; } +int board_late_init(void) +{ + omap_sata_init(); + return 0; +} + /** * @brief misc_init_r - Configure EVM board specific configurations * such as power configurations, ethernet initialization as phase2 of diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index bb3a699cf72..af854dac1ad 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -20,6 +20,7 @@ #include <asm/arch/clock.h> #include <asm/arch/ehci.h> #include <asm/ehci-omap.h> +#include <asm/arch/sata.h> #define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000) #define DIE_ID_REG_OFFSET 0x200 @@ -67,6 +68,12 @@ int board_init(void) return 0; } +int board_late_init(void) +{ + omap_sata_init(); + return 0; +} + int board_eth_init(bd_t *bis) { return 0; diff --git a/board/ti/omap730p2/Makefile b/board/ti/omap730p2/Makefile deleted file mode 100644 index 8242f3d69fc..00000000000 --- a/board/ti/omap730p2/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := omap730p2.o flash.o -obj-y += lowlevel_init.o diff --git a/board/ti/omap730p2/README.omap730p2 b/board/ti/omap730p2/README.omap730p2 deleted file mode 100644 index 7c70916120b..00000000000 --- a/board/ti/omap730p2/README.omap730p2 +++ /dev/null @@ -1,91 +0,0 @@ - - u-boot for the TI OMAP730 Perseus2 - - Dave Peverley, MPC-Data Limited - http://www.mpc-data.co.uk - - -Overview : - - As the OMAP730 is similar to the OMAP1610 in many ways, this port was based -on the u-boot port to the OMAP1610 Innovator. Supported features are : - - - Serial terminal support - - Onboard NOR Flash - - Ethernet via the seperate debug board - - Tested on Rev4 and Rev5 boards - - It has also been tested to work correctly when built with a 'standard' GCC -3.2.1 cross-compiler as well as Montavista Linux CEE 3.1's toolchain. - - -Hardware Configuration : - - The main dips on the P2 board should be set to 2,3,7 and 9 on with all -others off. On the debug board, dips 1 and 7 should be on with the rest off. -The serial console has been set up to run from the DB9 connector on the -P2 board at 115200 baud, 8 data bits, no stop bits, 1 parity bit. - - It should be noted that the P2 board has NOR flash that is addressable via -either CS0 or CS3. This mode can be changed via DIP9 on the P2 board. - - -Installing u-boot for the P2 : - - You can simply build u-boot for the Perseus by following the instructions -in the main readme file. The target configuration is "omap730p2_config". -Once u-boot has been built, you should strip the executable so it can be -loaded via CCS (which cant cope with the symbols in the ELF binary) : - $ cp u-boot u-boot.out - $ arm-linux-strip u-boot.out - - The method we've used for installing u-boot the first time on a P2 is -as follows : - -1) Configure TI Code Composer Studio to connect to the P2 board via JTAG - as described in the Users Guide. - -2) Set up the P2 to boot from CS3, and connect with CCS. Reset the CPU - and run the "init_mmu" GEL script. - -3) Use the "Load Program" option to send the u-boot.out file to the P2 and - run. - - At this point, u-boot should run and you will see the boot menu on your -serial terminal. You can then load the u-boot image to memory : - - # loadb 0x10000000 - - Send the "u-boot.bin" binary via the serial using Kermit. Once loaded -you can self-flash u-boot : - - # protect off 1:0 - # erase 1:0 - # cp.b 0x10000000 0x0 0x20000 - - You should now be able to reset the board and run u-boot from flash. - - -Alternative flash option : - - Sometimes, if you've been silly, you can get the board into a state where -whats in flash has upset the board so much that you can no longer connect -to the P2 via JTAG. However, you can set DIP9 to off to swap the boot mode -of the P2 so that you boot from RAM instead of NOR flash. This moves NOR -flash up to 0x0C000000. You can build a special version of u-boot to -utilise this by the following config : - - $ make omap730p2_cs0boot_config - - If you load this up via CCS it will detect flash at its alternate location -and allow you to programme your u-boot image (which, remember must be built -for CS3 boot!) Once you do this, you can revert to CS3 boot and it will work -fine again. - - -Errata : - -1) It's been observed that sometimes the tftp transfer of kernels to the - board can have checksum errors or stall. This appears to be an issue - with the lan91c96.c driver, and can normally be worked around by - resetting the board and trying again. diff --git a/board/ti/omap730p2/config.mk b/board/ti/omap730p2/config.mk deleted file mode 100644 index 86188204ea8..00000000000 --- a/board/ti/omap730p2/config.mk +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -# -# (C) Copyright 2003 -# Texas Instruments, <www.ti.com> -# Kshitij Gupta <Kshitij@ti.com> -# -# TI Perseus 2 board with OMAP720 (ARM925EJS) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# Innovator has 1 bank of 256 MB SDRAM -# Physical Address: -# 1000'0000 to 2000'0000 -# -# -# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 -# (mem base + reserved) -# -# we load ourself to 1108'0000 -# -# - -CONFIG_SYS_TEXT_BASE = 0x11080000 diff --git a/board/ti/omap730p2/flash.c b/board/ti/omap730p2/flash.c deleted file mode 100644 index 56f981c47b4..00000000000 --- a/board/ti/omap730p2/flash.c +++ /dev/null @@ -1,463 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/byteorder/swab.h> - -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Board support for 1 or 2 flash devices */ -#undef FLASH_PORT_WIDTH32 -#define FLASH_PORT_WIDTH16 - -#ifdef FLASH_PORT_WIDTH16 -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short -#define SWAP(x) __swab16(x) -#else -#define FLASH_PORT_WIDTH ulong -#define FLASH_PORT_WIDTHV vu_long -#define SWAP(x) __swab32(x) -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define mb() __asm__ __volatile__ ("" : : : "memory") - - -/* Flash Organization Structure */ -typedef struct OrgDef { - unsigned int sector_number; - unsigned int sector_size; -} OrgDef; - - -/* Flash Organizations */ -OrgDef OrgIntel_28F256L18T[] = { - {4, 32 * 1024}, /* 4 * 32kBytes sectors */ - {255, 128 * 1024}, /* 255 * 128kBytes sectors */ -}; - - -/*----------------------------------------------------------------------- - * Functions - */ -unsigned long flash_init (void); -static ulong flash_get_size (FPW * addr, flash_info_t * info); -static int write_data (flash_info_t * info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t * info); -void inline spin_wheel (void); -void flash_print_info (flash_info_t * info); -void flash_unprotect_sectors (FPWV * addr); -int flash_erase (flash_info_t * info, int s_first, int s_last); -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - if (i > 255) { - info->start[i] = base + (i * 0x8000); - info->protect[i] = 0; - } else { - info->start[i] = base + - (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F256L18T: - printf ("FLASH 28F256L18T\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info) -{ - volatile FPW value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW) 0x00AA00AA; - addr[0x2AAA] = (FPW) 0x00550055; - addr[0x5555] = (FPW) 0x00900090; - - mb (); - value = addr[0]; - - switch (value) { - - case (FPW) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[1]; /* device ID */ - switch (value) { - - case (FPW) (INTEL_ID_28F256L18T): - info->flash_id += FLASH_28F256L18T; - info->sector_count = 259; - info->size = 0x02000000; - break; /* => 32 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - - return (info->size); -} - - -/* unprotects a sector for write and erase - * on some intel parts, this unprotects the entire chip, but it - * wont hurt to call this additional times per sector... - */ -void flash_unprotect_sectors (FPWV * addr) -{ -#define PD_FINTEL_WSMS_READY_MASK 0x0080 - - *addr = (FPW) 0x00500050; /* clear status register */ - - /* this sends the clear lock bit command */ - *addr = (FPW) 0x00600060; - *addr = (FPW) 0x00D000D0; -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong type, start; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - flash_unprotect_sectors (addr); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - *addr = (FPW) 0x00500050;/* clear status register */ - *addr = (FPW) 0x00200020;/* erase setup */ - *addr = (FPW) 0x00D000D0;/* erase confirm */ - - while (((status = - *addr) & (FPW) 0x00800080) != - (FPW) 0x00800080) { - if (get_timer(start) > - CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - /* suspend erase */ - *addr = (FPW) 0x00B000B0; - /* reset to read mode */ - *addr = (FPW) 0x00FF00FF; - rcode = 1; - break; - } - } - - /* clear status register cmd. */ - *addr = (FPW) 0x00500050; - *addr = (FPW) 0x00FF00FF;/* resest to read mode */ - printf (" done\n"); - } - } - - if (flag) - enable_interrupts(); - - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } -/* get lower word aligned address */ -#ifdef FLASH_PORT_WIDTH16 - wp = (addr & ~1); - port_width = 2; -#else - wp = (addr & ~3); - port_width = 4; -#endif - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_data (info, wp, SWAP (data))); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t * info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong status; - int flag, rc = 0; - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); - return (2); - } - flash_unprotect_sectors (addr); - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - *addr = (FPW) 0x00400040; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - rc = 1; - goto done; - } - } -done: - *addr = (FPW)0x00FF00FF; /* restore read mode */ - if (flag) - enable_interrupts(); - return rc; -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} diff --git a/board/ti/omap730p2/lowlevel_init.S b/board/ti/omap730p2/lowlevel_init.S deleted file mode 100644 index 795c4953726..00000000000 --- a/board/ti/omap730p2/lowlevel_init.S +++ /dev/null @@ -1,379 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2003-2004 - * - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004 - * - * Modified for OMAP730 P2 Board by Dave Peverley, MPC-Data Limited - * (http://www.mpc-data.co.uk) - * - * TODO : Tidy up and change to use system register defines - * from omap730.h where possible. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <version.h> - -#if defined(CONFIG_OMAP730) -#include <./configs/omap730.h> -#endif - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ - -.globl lowlevel_init -lowlevel_init: - /* Save callers address in r11 - r11 must never be modified */ - mov r11, lr - - /*------------------------------------------------------* - *mask all IRQs by setting all bits in the INTMR default* - *------------------------------------------------------*/ - mov r1, #0xffffffff - ldr r0, =REG_IHL1_MIR - str r1, [r0] - ldr r0, =REG_IHL2_MIR - str r1, [r0] - - /*------------------------------------------------------* - * Set up ARM CLM registers (IDLECT1) * - *------------------------------------------------------*/ - ldr r0, REG_ARM_IDLECT1 - ldr r1, VAL_ARM_IDLECT1 - str r1, [r0] - - /*------------------------------------------------------* - * Set up ARM CLM registers (IDLECT2) * - *------------------------------------------------------*/ - ldr r0, REG_ARM_IDLECT2 - ldr r1, VAL_ARM_IDLECT2 - str r1, [r0] - - /*------------------------------------------------------* - * Set up ARM CLM registers (IDLECT3) * - *------------------------------------------------------*/ - ldr r0, REG_ARM_IDLECT3 - ldr r1, VAL_ARM_IDLECT3 - str r1, [r0] - - - mov r1, #0x01 /* PER_EN bit */ - ldr r0, REG_ARM_RSTCT2 - strh r1, [r0] /* CLKM; Peripheral reset. */ - - /* Set CLKM to Sync-Scalable */ - /* I supposedly need to enable the dsp clock before switching */ - mov r1, #0x1000 - ldr r0, REG_ARM_SYSST - strh r1, [r0] - mov r0, #0x400 -1: - subs r0, r0, #0x1 /* wait for any bubbles to finish */ - bne 1b - ldr r1, VAL_ARM_CKCTL - ldr r0, REG_ARM_CKCTL - strh r1, [r0] - - /* a few nops to let settle */ - nop - nop - nop - nop - nop - nop - nop - nop - nop - nop - - /* setup DPLL 1 */ - /* Ramp up the clock to 96Mhz */ - ldr r1, VAL_DPLL1_CTL - ldr r0, REG_DPLL1_CTL - strh r1, [r0] - ands r1, r1, #0x10 /* Check if PLL is enabled. */ - beq lock_end /* Do not look for lock if BYPASS selected */ -2: - ldrh r1, [r0] - ands r1, r1, #0x01 /* Check the LOCK bit.*/ - beq 2b /* loop until bit goes hi. */ -lock_end: - - /*------------------------------------------------------* - * Turn off the watchdog during init... * - *------------------------------------------------------*/ - ldr r0, REG_WATCHDOG - ldr r1, WATCHDOG_VAL1 - str r1, [r0] - ldr r1, WATCHDOG_VAL2 - str r1, [r0] - ldr r0, REG_WSPRDOG - ldr r1, WSPRDOG_VAL1 - str r1, [r0] - ldr r0, REG_WWPSDOG - -watch1Wait: - ldr r1, [r0] - tst r1, #0x10 - bne watch1Wait - - ldr r0, REG_WSPRDOG - ldr r1, WSPRDOG_VAL2 - str r1, [r0] - ldr r0, REG_WWPSDOG -watch2Wait: - ldr r1, [r0] - tst r1, #0x10 - bne watch2Wait - - /* Set memory timings corresponding to the new clock speed */ - - /* Check execution location to determine current execution location - * and branch to appropriate initialization code. - */ - /* Compare physical SDRAM base & current execution location. */ - and r0, pc, #0xF0000000 - /* Compare. */ - cmp r0, #0 - /* Skip over EMIF-fast initialization if running from SDRAM. */ - bne skip_sdram - - /* - * Delay for SDRAM initialization. - */ - mov r3, #0x1800 /* value should be checked */ -3: - subs r3, r3, #0x1 /* Decrement count */ - bne 3b - - ldr r0, REG_SDRAM_CONFIG - ldr r1, SDRAM_CONFIG_VAL - str r1, [r0] - - ldr r0, REG_SDRAM_MRS_LEGACY - ldr r1, SDRAM_MRS_VAL - str r1, [r0] - -skip_sdram: - -common_tc: - /* slow interface */ - ldr r1, VAL_TC_EMIFS_CS0_CONFIG - ldr r0, REG_TC_EMIFS_CS0_CONFIG - str r1, [r0] /* Chip Select 0 */ - - ldr r1, VAL_TC_EMIFS_CS1_CONFIG - ldr r0, REG_TC_EMIFS_CS1_CONFIG - str r1, [r0] /* Chip Select 1 */ - ldr r1, VAL_TC_EMIFS_CS2_CONFIG - ldr r0, REG_TC_EMIFS_CS2_CONFIG - str r1, [r0] /* Chip Select 2 */ - ldr r1, VAL_TC_EMIFS_CS3_CONFIG - ldr r0, REG_TC_EMIFS_CS3_CONFIG - str r1, [r0] /* Chip Select 3 */ - - /* 48MHz clock request for UART1 */ - ldr r1, PERSEUS2_CONFIG_BASE - ldrh r0, [r1, #CONFIG_PCC_CONF] - orr r0, r0, #CONF_MOD_UART1_CLK_MODE_R - strh r0, [r1, #CONFIG_PCC_CONF] - - /* Initialize public and private rheas - * - set access factor 2 on both rhea / strobe - * - disable write buffer on strb0, enable write buffer on strb1 - */ - - ldr R0, REG_RHEA_PUB_CTL - ldr R1, REG_RHEA_PRIV_CTL - ldr R2, VAL_RHEA_CTL - strh R2, [R0] - strh R2, [R1] - mov R3, #2 /* disable write buffer on strb0, enable write buffer on strb1 */ - strh R3, [R0, #0x08] /* arm rhea control reg */ - strh R3, [R1, #0x08] - - /* enable IRQ and FIQ */ - - mrs r4, CPSR - bic r4, r4, #IRQ_MASK - bic r4, r4, #FIQ_MASK - msr CPSR, r4 - - /* set TAP CONF to TRI EMULATION */ - - ldr r1, [r0, #CONFIG_MODE2] - bic r1, r1, #0x18 - orr r1, r1, #0x10 - str r1, [r0, #CONFIG_MODE2] - - /* set tdbgen to 1 */ - - ldr r0, PERSEUS2_CONFIG_BASE - ldr r1, [r0, #CONFIG_MODE1] - mov r2, #0x10000 - orr r1, r1, r2 - str r1, [r0, #CONFIG_MODE1] - -#ifdef CONFIG_P2_OMAP1610 - /* inserting additional 2 clock cycle hold time for LAN */ - ldr r0, REG_TC_EMIFS_CS1_ADVANCED - ldr r1, VAL_TC_EMIFS_CS1_ADVANCED - str r1, [r0] -#endif - /* Start MPU Timer 1 */ - ldr r0, REG_MPU_LOAD_TIMER - ldr r1, VAL_MPU_LOAD_TIMER - str r1, [r0] - - ldr r0, REG_MPU_CNTL_TIMER - ldr r1, VAL_MPU_CNTL_TIMER - str r1, [r0] - - /* back to arch calling code */ - mov pc, r11 - - /* the literal pools origin */ - .ltorg - -REG_TC_EMIFS_CONFIG: /* 32 bits */ - .word 0xfffecc0c -REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */ - .word 0xfffecc10 -REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */ - .word 0xfffecc14 -REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */ - .word 0xfffecc18 -REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */ - .word 0xfffecc1c - -#ifdef CONFIG_P2_OMAP730 -REG_TC_EMIFS_CS1_ADVANCED: /* 32 bits */ - .word 0xfffecc54 -#endif - -/* MPU clock/reset/power mode control registers */ -REG_ARM_CKCTL: /* 16 bits */ - .word 0xfffece00 - -REG_ARM_IDLECT3: /* 16 bits */ - .word 0xfffece24 -REG_ARM_IDLECT2: /* 16 bits */ - .word 0xfffece08 -REG_ARM_IDLECT1: /* 16 bits */ - .word 0xfffece04 - -REG_ARM_RSTCT2: /* 16 bits */ - .word 0xfffece14 -REG_ARM_SYSST: /* 16 bits */ - .word 0xfffece18 -/* DPLL control registers */ -REG_DPLL1_CTL: /* 16 bits */ - .word 0xfffecf00 - -/* Watch Dog register */ -/* secure watchdog stop */ -REG_WSPRDOG: - .word 0xfffeb048 -/* watchdog write pending */ -REG_WWPSDOG: - .word 0xfffeb034 - -WSPRDOG_VAL1: - .word 0x0000aaaa -WSPRDOG_VAL2: - .word 0x00005555 - -/* SDRAM config is: auto refresh enabled, 16 bit 4 bank, - counter @8192 rows, 10 ns, 8 burst */ -REG_SDRAM_CONFIG: - .word 0xfffecc20 - -REG_SDRAM_MRS_LEGACY: - .word 0xfffecc24 - -REG_WATCHDOG: - .word 0xfffec808 - -REG_MPU_LOAD_TIMER: - .word 0xfffec504 -REG_MPU_CNTL_TIMER: - .word 0xfffec500 - -/* Public and private rhea bridge registers definition */ - -REG_RHEA_PUB_CTL: - .word 0xFFFECA00 - -REG_RHEA_PRIV_CTL: - .word 0xFFFED300 - -/* EMIFF SDRAM Configuration register - - self refresh disable - - auto refresh enabled - - SDRAM type 64 Mb, 16 bits bus 4 banks - - power down enabled - - SDRAM clock disabled - */ -SDRAM_CONFIG_VAL: - .word 0x0C017DF4 - -/* Burst full page length ; cas latency = 3 */ -SDRAM_MRS_VAL: - .word 0x00000037 - -VAL_ARM_CKCTL: - .word 0x6505 -VAL_DPLL1_CTL: - .word 0x3412 - -#ifdef CONFIG_P2_OMAP730 -VAL_TC_EMIFS_CS0_CONFIG: - .word 0x0000FFF3 -VAL_TC_EMIFS_CS1_CONFIG: - .word 0x00004278 -VAL_TC_EMIFS_CS2_CONFIG: - .word 0x00004278 -VAL_TC_EMIFS_CS3_CONFIG: - .word 0x00004278 -VAL_TC_EMIFS_CS1_ADVANCED: - .word 0x00000022 -#endif - -VAL_ARM_IDLECT1: - .word 0x00000400 -VAL_ARM_IDLECT2: - .word 0x00000886 -VAL_ARM_IDLECT3: - .word 0x00000015 - -WATCHDOG_VAL1: - .word 0x000000f5 -WATCHDOG_VAL2: - .word 0x000000a0 - -VAL_MPU_LOAD_TIMER: - .word 0xffffffff -VAL_MPU_CNTL_TIMER: - .word 0xffffffa1 - -VAL_RHEA_CTL: - .word 0xFF22 - -/* Config Register vals */ -PERSEUS2_CONFIG_BASE: - .word 0xFFFE1000 - -.equ CONFIG_PCC_CONF, 0xB4 -.equ CONFIG_MODE1, 0x10 -.equ CONFIG_MODE2, 0x14 -.equ CONF_MOD_UART1_CLK_MODE_R, 0x0A - -/* misc values */ -.equ IRQ_MASK, 0x80 /* IRQ mask value */ -.equ FIQ_MASK, 0x40 /* FIQ mask value */ diff --git a/board/ti/omap730p2/omap730p2.c b/board/ti/omap730p2/omap730p2.c deleted file mode 100644 index 554019c2070..00000000000 --- a/board/ti/omap730p2/omap730p2.c +++ /dev/null @@ -1,255 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#if defined(CONFIG_OMAP730) -#include <./configs/omap730.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -int test_boot_mode(void); -void spin_up_leds(void); -void flash__init (void); -void ether__init (void); -void set_muxconf_regs (void); -void peripheral_power_enable (void); - -#define FLASH_ON_CS0 1 -#define FLASH_ON_CS3 0 - -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - -int test_boot_mode(void) -{ - /* Check for CS0 and CS3 address decode swapping */ - if (*((volatile int *)EMIFS_CONFIG) & 0x00000002) - return(FLASH_ON_CS3); - else - return(FLASH_ON_CS0); -} - -/* Toggle backup LED indication */ -void toggle_backup_led(void) -{ - static int backupLEDState = 0; /* Init variable so that the LED will be ON the first time */ - volatile unsigned int *IOConfReg; - - - IOConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_5 + GPIO_DATA_OUTPUT); - - if (backupLEDState != 0) { - *IOConfReg &= (0xFFFFEFFF); - backupLEDState = 0; - } else { - *IOConfReg |= (0x00001000); - backupLEDState = 1; - } -} - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* arch number of OMAP 730 P2 Board - Same as the Innovator! */ - gd->bd->bi_arch_number = MACH_TYPE_OMAP_PERSEUS2; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x10000100; - - /* Configure MUX settings */ - set_muxconf_regs (); - - peripheral_power_enable (); - - /* Backup LED indication via GPIO_140 -> Red led if MUX correctly setup */ - toggle_backup_led(); - - /* Hold GSM in reset until needed */ - *((volatile unsigned short *)M_CTL) &= ~1; - - /* - * CSx timings, GPIO Mux ... setup - */ - - /* Flash: CS0 timings setup */ - *((volatile unsigned int *) FLASH_CFG_0) = 0x0000fff3; - *((volatile unsigned int *) FLASH_ACFG_0_1) = 0x00000088; - - /* Ethernet support trough the debug board */ - /* CS1 timings setup */ - *((volatile unsigned int *) FLASH_CFG_1) = 0x0000fff3; - *((volatile unsigned int *) FLASH_ACFG_0_1) = 0x00000000; - - /* this speeds up your boot a quite a bit. However to make it - * work, you need make sure your kernel startup flush bug is fixed. - * ... rkw ... - */ - icache_enable (); - - flash__init (); - ether__init (); - - return 0; -} - -/****************************** - Routine: - Description: -******************************/ -void flash__init (void) -{ - unsigned int regval; - - regval = *((volatile unsigned int *) EMIFS_CONFIG); - /* Turn off write protection for flash devices. */ - regval = regval | 0x0001; - *((volatile unsigned int *) EMIFS_CONFIG) = regval; -} - -/************************************************************* - Routine:ether__init - Description: take the Ethernet controller out of reset and wait - for the EEPROM load to complete. -*************************************************************/ -void ether__init (void) -{ -#define LAN_RESET_REGISTER 0x0400001c - - *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000; - do { - *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0001; - udelay (100); - } while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0001); - - do { - *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000; - udelay (100); - } while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0000); - -#define ETH_CONTROL_REG 0x0400030b - - *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; - udelay (100); -} - -/****************************** - Routine: - Description: -******************************/ -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -/****************************************************** - Routine: set_muxconf_regs - Description: Setting up the configuration Mux registers - specific to the hardware -*******************************************************/ -void set_muxconf_regs (void) -{ - volatile unsigned int *MuxConfReg; - /* set each registers to its reset value; */ - - /* - * Backup LED Indication - */ - - /* Configure MUXed pin. Mode 6: GPIO_140 */ - MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF10); - *MuxConfReg &= (0xFFFFFF1F); /* Clear D_MPU_LPG1 */ - *MuxConfReg |= 0x000000C0; /* Set D_MPU_LPG1 to 0x6 */ - - /* Configure GPIO_140 as output */ - MuxConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_5 + GPIO_DIRECTION_CONTROL); - *MuxConfReg &= (0xFFFFEFFF); /* Clear direction (output) for GPIO 140 */ - - /* - * Configure GPIOs for battery charge & feedback - */ - - /* Configure MUXed pin. Mode 6: GPIO_35 */ - MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF3); - *MuxConfReg &= 0xFFFFFFF1; /* Clear M_CLK_OUT */ - *MuxConfReg |= 0x0000000C; /* Set M_CLK_OUT = 0x6 (GPIOs) */ - - /* Configure MUXed pin. Mode 6: GPIO_72,73,74 */ - MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF5); - *MuxConfReg &= 0xFFFF1FFF; /* Clear D_DDR */ - *MuxConfReg |= 0x0000C000; /* Set D_DDR = 0x6 (GPIOs) */ - - MuxConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_3 + GPIO_DIRECTION_CONTROL); - *MuxConfReg |= 0x00000100; /* Configure GPIO_72 as input */ - *MuxConfReg &= 0xFFFFFDFF; /* Configure GPIO_73 as output */ - - /* - * Allow battery charge - */ - - MuxConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_3 + GPIO_DATA_OUTPUT); - *MuxConfReg &= (0xFFFFFDFF); /* Clear GPIO_73 pin */ - - /* - * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, - * It is used as the Ethernet controller interrupt - */ - MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF9); - *MuxConfReg &= 0x1FFFFFFF; -} - -/****************************************************** - Routine: peripheral_power_enable - Description: Enable the power for UART1 -*******************************************************/ -void peripheral_power_enable (void) -{ - volatile unsigned int *MuxConfReg; - - - /* Set up pins used by UART */ - - /* Start UART clock (48MHz) */ - MuxConfReg = (volatile unsigned int *) (PERSEUS_PCC_CONF_REG); - *MuxConfReg &= (0xFFFFFFF7); - *MuxConfReg |= (0x00000008); - - /* Get the UART pin in mode0 */ - MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF3); - *MuxConfReg &= (0xFF1FFFFF); - *MuxConfReg &= (0xF1FFFFFF); -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_LAN91C96 - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); -#endif - return rc; -} -#endif diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index c104024b100..cda09a91259 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -123,6 +123,66 @@ int get_board_revision(void) } /** + * is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES + * + * + * Detect if we are running on B3 version of ES panda board, + * This can be done by reading the level of GPIO 171 and checking the + * processor revisions. + * GPIO171: 1 => Panda ES Rev B3 + * + * Return : return 1 if Panda ES Rev B3 , else return 0 + */ +u8 is_panda_es_rev_b3(void) +{ + int processor_rev = omap_revision(); + int ret = 0; + + if ((processor_rev >= OMAP4460_ES1_0 && + processor_rev <= OMAP4460_ES1_1)) { + + /* Setup the mux for the common board ID pins (gpio 171) */ + writew((IEN | M3), + (*ctrl)->control_padconf_core_base + UNIPRO_TX0); + + /* if processor_rev is panda ES and GPIO171 is 1,it is rev b3 */ + ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO); + } + return ret; +} + +#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +/* + * emif_get_reg_dump() - emif_get_reg_dump strong function + * + * @emif_nr - emif base + * @regs - reg dump of timing values + * + * Strong function to override emif_get_reg_dump weak function in sdram_elpida.c + */ +void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) +{ + u32 omap4_rev = omap_revision(); + + /* Same devices and geometry on both EMIFs */ + if (omap4_rev == OMAP4430_ES1_0) + *regs = &emif_regs_elpida_380_mhz_1cs; + else if (omap4_rev == OMAP4430_ES2_0) + *regs = &emif_regs_elpida_200_mhz_2cs; + else if (omap4_rev == OMAP4430_ES2_3) + *regs = &emif_regs_elpida_400_mhz_1cs; + else if (omap4_rev < OMAP4470_ES1_0) { + if(is_panda_es_rev_b3()) + *regs = &emif_regs_elpida_400_mhz_1cs; + else + *regs = &emif_regs_elpida_400_mhz_2cs; + } + else + *regs = &emif_regs_elpida_400_mhz_1cs; +} +#endif + +/** * @brief misc_init_r - Configure Panda board specific configurations * such as power configurations, ethernet initialization as phase2 of * boot sequence diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c index e406326a11e..0b76a779059 100644 --- a/board/ti/ti814x/evm.c +++ b/board/ti/ti814x/evm.c @@ -33,15 +33,12 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; #ifdef CONFIG_SPL_BUILD static const struct cmd_control evm_ddr2_cctrl_data = { .cmd0csratio = 0x80, - .cmd0dldiff = 0x04, .cmd0iclkout = 0x00, .cmd1csratio = 0x80, - .cmd1dldiff = 0x04, .cmd1iclkout = 0x00, .cmd2csratio = 0x80, - .cmd2dldiff = 0x04, .cmd2iclkout = 0x00, }; @@ -77,8 +74,6 @@ static const struct ddr_data evm_ddr2_data = { .datagiratio0 = ((0<<10) | (0<<0)), .datafwsratio0 = ((0x90<<10) | (0x90<<0)), .datawrsratio0 = ((0x50<<10) | (0x50<<0)), - .datauserank0delay = 1, - .datadldiff0 = 0x4, }; void set_uart_mux_conf(void) diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c index 74d35e936d5..a53859e52e4 100644 --- a/board/ti/ti816x/evm.c +++ b/board/ti/ti816x/evm.c @@ -59,21 +59,16 @@ static struct ddr_data ddr2_data = { .datagiratio0 = ((0x0<<10) | (0x0<<0)), .datafwsratio0 = ((0x13A<<10) | (0x13A<<0)), .datawrsratio0 = ((0x8A<<10) | (0x8A<<0)), - .datauserank0delay = 0x1, - .datadldiff0 = 0x0, /* depend on cpu rev, set later */ }; static struct cmd_control ddr2_ctrl = { .cmd0csratio = 0x80, - .cmd0dldiff = 0x04, /* reset value is 0x4 */ .cmd0iclkout = 0x00, .cmd1csratio = 0x80, - .cmd1dldiff = 0x04, /* reset value is 0x4 */ .cmd1iclkout = 0x00, .cmd2csratio = 0x80, - .cmd2dldiff = 0x04, /* reset value is 0x4 */ .cmd2iclkout = 0x00, }; @@ -150,21 +145,16 @@ static struct ddr_data ddr3_data = { .datagiratio0 = ((0x20<<10) | 0x20<<0), .datafwsratio0 = ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)), .datawrsratio0 = (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)), - .datauserank0delay = 0x1, - .datadldiff0 = 0x0, /* depend on cpu rev, set later */ }; static const struct cmd_control ddr3_ctrl = { .cmd0csratio = 0x100, - .cmd0dldiff = 0x004, /* reset value is 0x4 */ .cmd0iclkout = 0x001, .cmd1csratio = 0x100, - .cmd1dldiff = 0x004, /* reset value is 0x4 */ .cmd1iclkout = 0x001, .cmd2csratio = 0x100, - .cmd2dldiff = 0x004, /* reset value is 0x4 */ .cmd2iclkout = 0x001, }; @@ -198,11 +188,6 @@ void sdram_init(void) config_dmm(&evm_lisa_map_regs); #ifdef CONFIG_TI816X_EVM_DDR2 - ddr2_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF); - ddr2_ctrl.cmd0dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF); - ddr2_ctrl.cmd1dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF); - ddr2_ctrl.cmd2dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF); - if (CONFIG_TI816X_USE_EMIF0) { ddr2_emif0_regs.emif_ddr_phy_ctlr_1 = (get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B); @@ -217,8 +202,6 @@ void sdram_init(void) #endif #ifdef CONFIG_TI816X_EVM_DDR3 - ddr3_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF); - if (CONFIG_TI816X_USE_EMIF0) config_ddr(0, 0, &ddr3_data, &ddr3_ctrl, &ddr3_emif0_regs, 0); diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds index c9b50e9f4dd..02d107c4b9b 100644 --- a/board/vpac270/u-boot-spl.lds +++ b/board/vpac270/u-boot-spl.lds @@ -62,13 +62,13 @@ SECTIONS __bss_end = .; } - /DISCARD/ : { *(.bss*) } - /DISCARD/ : { *(.dynsym) } - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynsym*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.hash*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } + .dynsym _end : { *(.dynsym) } + .dynbss : { *(.dynbss) } + .dynstr : { *(.dynstr*) } + .dynamic : { *(.dynamic*) } + .hash : { *(.hash*) } + .plt : { *(.plt*) } + .interp : { *(.interp*) } + .gnu : { *(.gnu*) } + .ARM.exidx : { *(.ARM.exidx*) } } |