Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

* 'master' of git://git.denx.de/u-boot-mpc85xx:
  powerpc/85xx: don't touch MAS7 on e500v1 when relocating CCSR
  powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot
  cmd_bdinfo: display the address map size (32-bit vs. 36-bit)
  PowerPC: correct the SATA for p1/p2 rdb-pc platform
  powerpc/corenet_ds: Slave core in holdoff when boot from SRIO
  powerpc/corenet_ds: Slave reads ENV from master when boot from SRIO
  powerpc/corenet_ds: Slave uploads ucode when boot from SRIO
  powerpc/corenet_ds: Slave module for boot from SRIO
  powerpc/corenet_ds: Master module for boot from SRIO
  powerpc/corenet_ds: Document for the boot from SRIO
  powerpc/corenet_ds: Correct the compilation errors about ENV
  powerpc/srio: Rewrite the struct ccsr_rio
  powerpc/85xx:Fix lds for nand boot debug info
  powerpc/p2041rdb: add env in NAND support
  powerpc/p2041rdb: add NAND and NAND boot support
  powerpc/mpc8xxx: Fix CONFIG_DDR_RAW_TIMING for two boards
  powerpc/85xx:Avoid vector table compilation for nand_spl
  powerpc/85xx:Fix IVORs addr after vector table relocation
  powerpc/85xx:Avoid hardcoded vector address for IVORs
  powerpc/p1023rds: Disable nor flash node and enable nand flash node

16 files changed, 52 insertions, 57 deletions

diff --git a/board/freescale/common/p_corenet/law.c b/board/freescale/common/p_corenet/law.c
index 09ef5615d26..c4566ddd4f7 100644
--- a/board/freescale/common/p_corenet/law.c
+++ b/board/freescale/common/p_corenet/law.c
@@ -48,6 +48,19 @@ struct law_entry law_table[] = {
 #ifdef CONFIG_SYS_NAND_BASE_PHYS
 	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 #endif
+#ifdef CONFIG_SRIOBOOT_SLAVE
+#if defined(CONFIG_SRIOBOOT_SLAVE_PORT0)
+	SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
+				LAW_SIZE_1M, LAW_TRGT_IF_RIO_1),
+	SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
+				LAW_SIZE_1M, LAW_TRGT_IF_RIO_1),
+#elif defined(CONFIG_SRIOBOOT_SLAVE_PORT1)
+	SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
+				LAW_SIZE_1M, LAW_TRGT_IF_RIO_2),
+	SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
+				LAW_SIZE_1M, LAW_TRGT_IF_RIO_2),
+#endif
+#endif
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/common/p_corenet/tlb.c b/board/freescale/common/p_corenet/tlb.c
index 6a0026a2cf7..da2162728fd 100644
--- a/board/freescale/common/p_corenet/tlb.c
+++ b/board/freescale/common/p_corenet/tlb.c
@@ -66,6 +66,15 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 0, BOOKE_PAGESZ_1M, 1),
+#elif defined(CONFIG_SRIOBOOT_SLAVE)
+	/*
+	 * SRIOBOOT-SLAVE. When slave boot, the address of the
+	 * space is at 0xfff00000, it covered the 0xfffff000.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_SRIOBOOT_SLAVE_ADDR,
+			CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+			0, 0, BOOKE_PAGESZ_1M, 1),
 #else
 	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
@@ -138,6 +147,16 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 16, BOOKE_PAGESZ_1M, 1),
 #endif
+#ifdef CONFIG_SRIOBOOT_SLAVE
+	/*
+	 * SRIOBOOT-SLAVE. 1M space from 0xffe00000 for fetching ucode
+	 * and ENV from master
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR,
+		CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
+		0, 17, BOOKE_PAGESZ_1M, 1),
+#endif
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index b1eecc495d8..a33c936fa00 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -62,10 +62,6 @@ int checkboard (void)
 	else
 		printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
 
-#ifdef CONFIG_PHYS_64BIT
-	puts("36-bit Addressing\n");
-#endif
-
 	/* Display the RCW, so that no one gets confused as to what RCW
 	 * we're actually using for this boot.
 	 */
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index c9f85c857b1..6d0bfde2320 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -68,12 +68,7 @@ int checkboard (void)
 	u8 vboot;
 	u8 *pixis_base = (u8 *)PIXIS_BASE;
 
-	puts("Board: MPC8536DS ");
-#ifdef CONFIG_PHYS_64BIT
-	puts("(36-bit addrmap) ");
-#endif
-
-	printf ("Sys ID: 0x%02x, "
+	printf("Board: MPC8536DS Sys ID: 0x%02x, "
 		"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
 		in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
 		in_8(pixis_base + PIXIS_PVER));
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index b20299e36f6..33a02ba8d3b 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -45,11 +45,7 @@ int checkboard (void)
 	u8 vboot;
 	u8 *pixis_base = (u8 *)PIXIS_BASE;
 
-	puts ("Board: MPC8572DS ");
-#ifdef CONFIG_PHYS_64BIT
-	puts ("(36-bit addrmap) ");
-#endif
-	printf ("Sys ID: 0x%02x, "
+	printf("Board: MPC8572DS Sys ID: 0x%02x, "
 		"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
 		in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
 		in_8(pixis_base + PIXIS_PVER));
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 455569e422b..6a0a3a2b37b 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -50,9 +50,6 @@ int checkboard(void)
 	else
 		puts ("Promjet\n");
 
-#ifdef CONFIG_PHYS_64BIT
-	printf ("       36-bit physical address map\n");
-#endif
 	return 0;
 }
 
diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c
index e5d8423df04..36c8545059a 100644
--- a/board/freescale/p1010rdb/ddr.c
+++ b/board/freescale/p1010rdb/ddr.c
@@ -31,7 +31,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef CONFIG_DDR_RAW_TIMING
+#ifndef CONFIG_SYS_DDR_RAW_TIMING
 #define CONFIG_SYS_DRAM_SIZE	1024
 
 fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
@@ -165,7 +165,7 @@ phys_size_t fixed_sdram(void)
 	return ddr_size;
 }
 
-#else /* CONFIG_DDR_RAW_TIMING */
+#else /* CONFIG_SYS_DDR_RAW_TIMING */
 /*
  * Samsung K4B2G0846C-HCF8
  * The following timing are for "downshift"
@@ -247,4 +247,4 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	}
 }
 
-#endif /* CONFIG_DDR_RAW_TIMING */
+#endif /* CONFIG_SYS_DDR_RAW_TIMING */
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index b9e66f7fa75..79a6ead7dd3 100644
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -165,11 +165,7 @@ int checkboard(void)
 	struct cpu_type *cpu;
 
 	cpu = gd->cpu;
-	printf("Board: %sRDB ", cpu->name);
-#ifdef CONFIG_PHYS_64BIT
-	puts("(36-bit addrmap)");
-#endif
-	puts("\n");
+	printf("Board: %sRDB\n", cpu->name);
 
 	return 0;
 }
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 456d9b0e342..aca30f36807 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -56,12 +56,8 @@ int checkboard(void)
 {
 	u8 sw;
 
-	puts("Board: P1022DS ");
-#ifdef CONFIG_PHYS_64BIT
-	puts("(36-bit addrmap) ");
-#endif
-
-	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+	printf("Board: P1022DS Sys ID: 0x%02x, "
+	       "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
 		in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
 
 	sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c
index 546819cb59a..082976a9240 100644
--- a/board/freescale/p1023rds/p1023rds.c
+++ b/board/freescale/p1023rds/p1023rds.c
@@ -197,6 +197,12 @@ void ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory(blob, (u64)base, (u64)size);
 
+	/* By default NOR is on, and NAND is disabled */
+#ifdef CONFIG_NAND_U_BOOT
+	do_fixup_by_path_string(blob, "nor_flash", "status", "disabled");
+	do_fixup_by_path_string(blob, "nand_flash", "status", "okay");
+#endif
+
 	fdt_fixup_fman_ethernet(blob);
 }
 #endif
diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
index cfbae691198..437eaf0fdd6 100644
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
@@ -110,9 +110,7 @@ int checkboard (void)
 
 	cpu = gd->cpu;
 	printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev);
-#ifdef CONFIG_PHYS_64BIT
-	puts ("(36-bit addrmap) \n");
-#endif
+
 	setbits_be32(&pgpio->gpdir, GPIO_DIR);
 
 /*
diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c
index f0cbde72abb..88ba56f457e 100644
--- a/board/freescale/p1_p2_rdb_pc/ddr.c
+++ b/board/freescale/p1_p2_rdb_pc/ddr.c
@@ -15,7 +15,7 @@
 #include <asm/io.h>
 #include <asm/fsl_law.h>
 
-#ifdef CONFIG_DDR_RAW_TIMING
+#ifdef CONFIG_SYS_DDR_RAW_TIMING
 #if	defined(CONFIG_P1020RDB_PROTO) || \
 	defined(CONFIG_P1021RDB) || \
 	defined(CONFIG_P1020UTM)
@@ -204,7 +204,7 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
 
 	return 0;
 }
-#endif /* CONFIG_DDR_RAW_TIMING */
+#endif /* CONFIG_SYS_DDR_RAW_TIMING */
 
 /* Fixed sdram init -- doesn't use serial presence detect. */
 phys_size_t fixed_sdram(void)
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index a60c5a20a98..aa39260ca7e 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -225,13 +225,7 @@ int checkboard(void)
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	u8 in, out, io_config, val;
 
-	printf("Board: %s ", CONFIG_BOARDNAME);
-
-#ifdef CONFIG_PHYS_64BIT
-	puts("(36-bit addrmap) ");
-#endif
-
-	printf("CPLD: V%d.%d PCBA: V%d.0\n",
+	printf("Board: %s CPLD: V%d.%d PCBA: V%d.0\n", CONFIG_BOARDNAME,
 		in_8(&cpld_data->cpld_rev_major) & 0x0F,
 		in_8(&cpld_data->cpld_rev_minor) & 0x0F,
 		in_8(&cpld_data->pcba_rev) & 0x0F);
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index d3af6cf1851..e8d31a4acf3 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -61,12 +61,8 @@ int checkboard(void)
 {
 	u8 sw;
 
-	puts("Board: P2020DS ");
-#ifdef CONFIG_PHYS_64BIT
-	puts("(36-bit addrmap) ");
-#endif
-
-	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+	printf("Board: P2020DS Sys ID: 0x%02x, "
+	       "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
 		in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
 
 	sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index 1f6a34b3d94..976c8d290b0 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -54,10 +54,6 @@ int checkboard(void)
 	sw = CPLD_READ(fbank_sel);
 	printf("vBank: %d\n", sw & 0x1);
 
-#ifdef CONFIG_PHYS_64BIT
-	puts("36-bit Addressing\n");
-#endif
-
 	/*
 	 * Display the RCW, so that no one gets confused as to what RCW
 	 * we're actually using for this boot.
diff --git a/board/freescale/p3060qds/p3060qds.c b/board/freescale/p3060qds/p3060qds.c
index c6c74f20045..c7cca2a0ccd 100644
--- a/board/freescale/p3060qds/p3060qds.c
+++ b/board/freescale/p3060qds/p3060qds.c
@@ -68,9 +68,6 @@ int checkboard(void)
 	else
 		printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
 
-#ifdef CONFIG_PHYS_64BIT
-	puts("36-bit Addressing\n");
-#endif
 	puts("Reset Configuration Word (RCW):");
 	for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
 		u32 rcw = in_be32(&gur->rcwsr[i]);