ARM: remove broken "mx1fs2" board

Signed-off-by: Wolfgang Denk <wd@denx.de>

6 files changed, 0 insertions, 1319 deletions

diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile
deleted file mode 100644
index c55b695a51e..00000000000
--- a/board/mx1fs2/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= mx1fs2.o flash.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mx1fs2/config.mk b/board/mx1fs2/config.mk
deleted file mode 100644
index eb4d0469395..00000000000
--- a/board/mx1fs2/config.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# This config file is used for compilation of IMX sources
-#
-# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE.
-# This allows for example having one copy located at the end of ram and stored
-# in flash device and later on while developing use other location to test
-# the code in RAM device only.
-#
-
-CONFIG_SYS_TEXT_BASE = 0x08f00000
diff --git a/board/mx1fs2/flash.c b/board/mx1fs2/flash.c
deleted file mode 100644
index da4ebe6e751..00000000000
--- a/board/mx1fs2/flash.c
+++ /dev/null
@@ -1,849 +0,0 @@
-/*
- * (C) 2000-2004 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) 2003 August Hoeraendl, Logotronic GmbH
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#undef CONFIG_FLASH_16BIT
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE MX1FS2_FLASH_BANK_SIZE
-#define MAIN_SECT_SIZE  MX1FS2_FLASH_SECT_SIZE
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips   */
-
-/*
- * NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
- *        has nothing to do with the flash chip being 8-bit or 16-bit.
- */
-#ifdef CONFIG_FLASH_16BIT
-typedef unsigned short FLASH_PORT_WIDTH;
-typedef volatile unsigned short FLASH_PORT_WIDTHV;
-
-#define	FLASH_ID_MASK	0xFFFF
-#else
-typedef unsigned long FLASH_PORT_WIDTH;
-typedef volatile unsigned long FLASH_PORT_WIDTHV;
-
-#define	FLASH_ID_MASK	0xFFFFFFFF
-#endif
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define ORMASK(size) ((-size) & OR_AM_MSK)
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-#if 0
-static ulong flash_get_size(FPWV * addr, flash_info_t * info);
-static void flash_get_offsets(ulong base, flash_info_t * info);
-#endif
-static void flash_reset(flash_info_t * info);
-static int write_word_intel(flash_info_t * info, FPWV * dest, FPW data);
-static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data);
-#define write_word(in, de, da)   write_word_amd(in, de, da)
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-static void flash_sync_real_protect(flash_info_t * info);
-#endif
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-ulong
-flash_init(void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-		flash_info[i].flash_id =
-		    (FLASH_MAN_AMD & FLASH_VENDMASK) |
-		    (FLASH_AM640U & FLASH_TYPEMASK);
-		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-		switch (i) {
-		case 0:
-			flashbase = MX1FS2_FLASH_BASE;
-			break;
-		default:
-			panic("configured too many flash banks!\n");
-			break;
-		}
-		for (j = 0; j < flash_info[i].sector_count; j++) {
-			flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_FLASH_BASE,
-		      CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
-		      &flash_info[0]);
-
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void
-flash_reset(flash_info_t * info)
-{
-	FPWV *base = (FPWV *) (info->start[0]);
-
-	/* Put FLASH back in read mode */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
-		*base = (FPW) 0x00FF00FF;	/* Intel Read Mode */
-	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
-		*base = (FPW) 0x00F000F0;	/* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-#if 0
-static void
-flash_get_offsets(ulong base, flash_info_t * info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
-	    && (info->flash_id & FLASH_BTYPE)) {
-		int bootsect_size;	/* number of bytes/boot sector  */
-		int sect_size;	/* number of bytes/regular sector */
-
-		bootsect_size = 0x00002000 * (sizeof (FPW) / 2);
-		sect_size = 0x00010000 * (sizeof (FPW) / 2);
-
-		/* set sector offsets for bottom boot block type        */
-		for (i = 0; i < 8; ++i) {
-			info->start[i] = base + (i * bootsect_size);
-		}
-		for (i = 8; i < info->sector_count; i++) {
-			info->start[i] = base + ((i - 7) * sect_size);
-		}
-	} else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
-		   && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
-
-		int sect_size;	/* number of bytes/sector */
-
-		sect_size = 0x00010000 * (sizeof (FPW) / 2);
-
-		/* set up sector start address table (uniform sector type) */
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * sect_size);
-	}
-}
-#endif /* 0 */
-
-/*-----------------------------------------------------------------------
- */
-
-void
-flash_print_info(flash_info_t * info)
-{
-	int i;
-	uchar *boottype;
-	uchar *bootletter;
-	char *fmt;
-	uchar botbootletter[] = "B";
-	uchar topbootletter[] = "T";
-	uchar botboottype[] = "bottom boot sector";
-	uchar topboottype[] = "top boot sector";
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf("AMD ");
-		break;
-	case FLASH_MAN_BM:
-		printf("BRIGHT MICRO ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf("FUJITSU ");
-		break;
-	case FLASH_MAN_SST:
-		printf("SST ");
-		break;
-	case FLASH_MAN_STM:
-		printf("STM ");
-		break;
-	case FLASH_MAN_INTEL:
-		printf("INTEL ");
-		break;
-	default:
-		printf("Unknown Vendor ");
-		break;
-	}
-
-	/* check for top or bottom boot, if it applies */
-	if (info->flash_id & FLASH_BTYPE) {
-		boottype = botboottype;
-		bootletter = botbootletter;
-	} else {
-		boottype = topboottype;
-		bootletter = topbootletter;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM640U:
-		fmt = "29LV641D (64 Mbit, uniform sectors)\n";
-		break;
-	case FLASH_28F800C3B:
-	case FLASH_28F800C3T:
-		fmt = "28F800C3%s (8 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL800B:
-	case FLASH_INTEL800T:
-		fmt = "28F800B3%s (8 Mbit, %s)\n";
-		break;
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-		fmt = "28F160C3%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL160B:
-	case FLASH_INTEL160T:
-		fmt = "28F160B3%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-		fmt = "28F320C3%s (32 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL320B:
-	case FLASH_INTEL320T:
-		fmt = "28F320B3%s (32 Mbit, %s)\n";
-		break;
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		fmt = "28F640C3%s (64 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL640B:
-	case FLASH_INTEL640T:
-		fmt = "28F640B3%s (64 Mbit, %s)\n";
-		break;
-	default:
-		fmt = "Unknown Chip Type\n";
-		break;
-	}
-
-	printf(fmt, bootletter, boottype);
-
-	printf("  Size: %ld MB in %d Sectors\n",
-	       info->size >> 20, info->sector_count);
-
-	printf("  Sector Start Addresses:");
-
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0) {
-			printf("\n   ");
-		}
-
-		printf(" %08lX%s", info->start[i],
-		       info->protect[i] ? " (RO)" : "     ");
-	}
-
-	printf("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-#if 0
-ulong
-flash_get_size(FPWV * addr, flash_info_t * info)
-{
-	/* Write auto select command: read Manufacturer ID */
-
-	/* Write auto select command sequence and test FLASH answer */
-	addr[0x0555] = (FPW) 0x00AA00AA;	/* for AMD, Intel ignores this */
-	addr[0x02AA] = (FPW) 0x00550055;	/* for AMD, Intel ignores this */
-	addr[0x0555] = (FPW) 0x00900090;	/* selects Intel or AMD */
-
-	/* The manufacturer codes are only 1 byte, so just use 1 byte.
-	 * This works for any bus width and any FLASH device width.
-	 */
-	switch (addr[0] & 0xff) {
-
-	case (uchar) AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-
-	case (uchar) INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		break;
-	}
-
-	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
-	if (info->flash_id != FLASH_UNKNOWN)
-		switch (addr[1]) {
-
-		case (FPW) AMD_ID_LV640U:	/* 29LV640 and 29LV641 have same ID */
-			info->flash_id += FLASH_AM640U;
-			info->sector_count = 128;
-			info->size = 0x00800000 * (sizeof (FPW) / 2);
-			break;	/* => 8 or 16 MB        */
-
-		case (FPW) INTEL_ID_28F800C3B:
-			info->flash_id += FLASH_28F800C3B;
-			info->sector_count = 23;
-			info->size = 0x00100000 * (sizeof (FPW) / 2);
-			break;	/* => 1 or 2 MB         */
-
-		case (FPW) INTEL_ID_28F800B3B:
-			info->flash_id += FLASH_INTEL800B;
-			info->sector_count = 23;
-			info->size = 0x00100000 * (sizeof (FPW) / 2);
-			break;	/* => 1 or 2 MB         */
-
-		case (FPW) INTEL_ID_28F160C3B:
-			info->flash_id += FLASH_28F160C3B;
-			info->sector_count = 39;
-			info->size = 0x00200000 * (sizeof (FPW) / 2);
-			break;	/* => 2 or 4 MB         */
-
-		case (FPW) INTEL_ID_28F160B3B:
-			info->flash_id += FLASH_INTEL160B;
-			info->sector_count = 39;
-			info->size = 0x00200000 * (sizeof (FPW) / 2);
-			break;	/* => 2 or 4 MB         */
-
-		case (FPW) INTEL_ID_28F320C3B:
-			info->flash_id += FLASH_28F320C3B;
-			info->sector_count = 71;
-			info->size = 0x00400000 * (sizeof (FPW) / 2);
-			break;	/* => 4 or 8 MB         */
-
-		case (FPW) INTEL_ID_28F320B3B:
-			info->flash_id += FLASH_INTEL320B;
-			info->sector_count = 71;
-			info->size = 0x00400000 * (sizeof (FPW) / 2);
-			break;	/* => 4 or 8 MB         */
-
-		case (FPW) INTEL_ID_28F640C3B:
-			info->flash_id += FLASH_28F640C3B;
-			info->sector_count = 135;
-			info->size = 0x00800000 * (sizeof (FPW) / 2);
-			break;	/* => 8 or 16 MB        */
-
-		case (FPW) INTEL_ID_28F640B3B:
-			info->flash_id += FLASH_INTEL640B;
-			info->sector_count = 135;
-			info->size = 0x00800000 * (sizeof (FPW) / 2);
-			break;	/* => 8 or 16 MB        */
-
-		default:
-			info->flash_id = FLASH_UNKNOWN;
-			info->sector_count = 0;
-			info->size = 0;
-			return (0);	/* => no or unknown flash */
-		}
-
-	flash_get_offsets((ulong) addr, info);
-
-	/* Put FLASH back in read mode */
-	flash_reset(info);
-
-	return (info->size);
-}
-#endif /* 0 */
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-
-static void
-flash_sync_real_protect(flash_info_t * info)
-{
-	FPWV *addr = (FPWV *) (info->start[0]);
-	FPWV *sect;
-	int i;
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F800C3B:
-	case FLASH_28F800C3T:
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		/* check for protected sectors */
-		*addr = (FPW) 0x00900090;
-		for (i = 0; i < info->sector_count; i++) {
-			/* read sector protection at sector address, (A7 .. A0) = 0x02.
-			 * D0 = 1 for each device if protected.
-			 * If at least one device is protected the sector is marked
-			 * protected, but mixed protected and  unprotected devices
-			 * within a sector should never happen.
-			 */
-			sect = (FPWV *) (info->start[i]);
-			info->protect[i] =
-			    (sect[2] & (FPW) (0x00010001)) ? 1 : 0;
-		}
-
-		/* Put FLASH back in read mode */
-		flash_reset(info);
-		break;
-
-	case FLASH_AM640U:
-	default:
-		/* no hardware protect that we support */
-		break;
-	}
-}
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-int
-flash_erase(flash_info_t * info, int s_first, int s_last)
-{
-	FPWV *addr;
-	int flag, prot, sect;
-	int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
-	ulong start, now, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf("- missing\n");
-		} else {
-			printf("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_INTEL800B:
-	case FLASH_INTEL160B:
-	case FLASH_INTEL320B:
-	case FLASH_INTEL640B:
-	case FLASH_28F800C3B:
-	case FLASH_28F160C3B:
-	case FLASH_28F320C3B:
-	case FLASH_28F640C3B:
-	case FLASH_AM640U:
-		break;
-	case FLASH_UNKNOWN:
-	default:
-		printf("Can't erase unknown flash type %08lx - aborted\n",
-		       info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n",
-		       prot);
-	} else {
-		printf("\n");
-	}
-
-	start = get_timer(0);
-	last = start;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last && rcode == 0; sect++) {
-
-		if (info->protect[sect] != 0)	/* protected, skip it */
-			continue;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr = (FPWV *) (info->start[sect]);
-		if (intel) {
-			*addr = (FPW) 0x00500050;	/* clear status register */
-			*addr = (FPW) 0x00200020;	/* erase setup */
-			*addr = (FPW) 0x00D000D0;	/* erase confirm */
-		} else {
-			/* must be AMD style if not Intel */
-			FPWV *base;	/* first address in bank */
-
-			base = (FPWV *) (info->start[0]);
-			base[0x0555] = (FPW) 0x00AA00AA;	/* unlock */
-			base[0x02AA] = (FPW) 0x00550055;	/* unlock */
-			base[0x0555] = (FPW) 0x00800080;	/* erase mode */
-			base[0x0555] = (FPW) 0x00AA00AA;	/* unlock */
-			base[0x02AA] = (FPW) 0x00550055;	/* unlock */
-			*addr = (FPW) 0x00300030;	/* erase sector */
-		}
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		/* wait at least 50us for AMD, 80us for Intel.
-		 * Let's wait 1 ms.
-		 */
-		udelay(1000);
-
-		while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
-			if ((now = get_timer(0)) - start > CONFIG_SYS_FLASH_ERASE_TOUT) {
-				printf("Timeout\n");
-
-				if (intel) {
-					/* suspend erase        */
-					*addr = (FPW) 0x00B000B0;
-				}
-
-				flash_reset(info);	/* reset to read mode */
-				rcode = 1;	/* failed */
-				break;
-			}
-
-			/* show that we're waiting */
-			if ((now - last) > 1000) {	/* every second */
-				putc('.');
-				last = now;
-			}
-		}
-
-		flash_reset(info);	/* reset to read mode   */
-	}
-
-	printf(" done\n");
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int
-bad_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	FPW data = 0;		/* 16 or 32 bit word, matches flash bus width on MPC8XX */
-	int bytes;		/* number of bytes to program in current word         */
-	int left;		/* number of bytes left to program                    */
-	int i, res;
-
-	for (left = cnt, res = 0;
-	     left > 0 && res == 0;
-	     addr += sizeof (data), left -= sizeof (data) - bytes) {
-
-		bytes = addr & (sizeof (data) - 1);
-		addr &= ~(sizeof (data) - 1);
-
-		/* combine source and destination data so can program
-		 * an entire word of 16 or 32 bits
-		 */
-		for (i = 0; i < sizeof (data); i++) {
-			data <<= 8;
-			if (i < bytes || i - bytes >= left)
-				data += *((uchar *) addr + i);
-			else
-				data += *src++;
-		}
-
-		/* write one word to the flash */
-		switch (info->flash_id & FLASH_VENDMASK) {
-		case FLASH_MAN_AMD:
-			res = write_word_amd(info, (FPWV *) addr, data);
-			break;
-		case FLASH_MAN_INTEL:
-			res = write_word_intel(info, (FPWV *) addr, data);
-			break;
-		default:
-			/* unknown flash type, error! */
-			printf("missing or unknown FLASH type\n");
-			res = 1;	/* not really a timeout, but gives error */
-			break;
-		}
-	}
-
-	return (res);
-}
-
-/**
- * write_buf: - Copy memory to flash.
- *
- * @param info:
- * @param src:	source of copy transaction
- * @param addr:	where to copy to
- * @param cnt:	number of bytes to copy
- *
- * @return	error code
- */
-
-int
-write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	FPW data;
-	int l;
-	int i, rc;
-
-	wp = (addr & ~1);	/* get lower word aligned address */
-
-	/* handle unaligned start bytes */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *) cp << 8);
-		}
-		for (; i < 2 && cnt > 0; ++i) {
-			data = (data >> 8) | (*src++ << 8);
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < 2; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *) cp << 8);
-		}
-
-		if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 2;
-	}
-
-	/* handle word aligned part */
-	while (cnt >= 2) {
-		/* data = *((vushort*)src); */
-		data = *((FPW *) src);
-		if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
-			return (rc);
-		}
-		src += sizeof (FPW);
-		wp += sizeof (FPW);
-		cnt -= sizeof (FPW);
-	}
-
-	if (cnt == 0)
-		return ERR_OK;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
-		data = (data >> 8) | (*src++ << 8);
-		--cnt;
-	}
-	for (; i < 2; ++i, ++cp) {
-		data = (data >> 8) | (*(uchar *) cp << 8);
-	}
-
-	return write_word(info, (FPWV *)wp, data);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int
-write_word_amd(flash_info_t * info, FPWV * dest, FPW data)
-{
-	ulong start;
-	int flag;
-	int res = 0;		/* result, assume success       */
-	FPWV *base;		/* first address in flash bank  */
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*dest & data) != data) {
-		return (2);
-	}
-
-	base = (FPWV *) (info->start[0]);
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	base[0x0555] = (FPW) 0x00AA00AA;	/* unlock */
-	base[0x02AA] = (FPW) 0x00550055;	/* unlock */
-	base[0x0555] = (FPW) 0x00A000A0;	/* selects program mode */
-
-	*dest = data;		/* start programming the data   */
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	start = get_timer(0);
-
-	/* data polling for D7 */
-	while (res == 0
-	       && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
-		if (get_timer(0) - start > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*dest = (FPW) 0x00F000F0;	/* reset bank */
-			printf("SHA timeout\n");
-			res = 1;
-		}
-	}
-
-	return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for Intel FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int
-write_word_intel(flash_info_t * info, FPWV * dest, FPW data)
-{
-	ulong start;
-	int flag;
-	int res = 0;		/* result, assume success       */
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*dest & data) != data) {
-		return (2);
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	*dest = (FPW) 0x00500050;	/* clear status register        */
-	*dest = (FPW) 0x00FF00FF;	/* make sure in read mode       */
-	*dest = (FPW) 0x00400040;	/* program setup                */
-
-	*dest = data;		/* start programming the data   */
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	start = get_timer(0);
-
-	while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*dest = (FPW) 0x00B000B0;	/* Suspend program      */
-			res = 1;
-		}
-	}
-
-	if (res == 0 && (*dest & (FPW) 0x00100010))
-		res = 1;	/* write failed, time out error is close enough */
-
-	*dest = (FPW) 0x00500050;	/* clear status register        */
-	*dest = (FPW) 0x00FF00FF;	/* make sure in read mode       */
-
-	return (res);
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-int
-flash_real_protect(flash_info_t * info, long sector, int prot)
-{
-	int rcode = 0;		/* assume success */
-	FPWV *addr;		/* address of sector */
-	FPW value;
-
-	addr = (FPWV *) (info->start[sector]);
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F800C3B:
-	case FLASH_28F800C3T:
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		flash_reset(info);	/* make sure in read mode */
-		*addr = (FPW) 0x00600060L;	/* lock command setup */
-		if (prot)
-			*addr = (FPW) 0x00010001L;	/* lock sector */
-		else
-			*addr = (FPW) 0x00D000D0L;	/* unlock sector */
-		flash_reset(info);	/* reset to read mode */
-
-		/* now see if it really is locked/unlocked as requested */
-		*addr = (FPW) 0x00900090;
-		/* read sector protection at sector address, (A7 .. A0) = 0x02.
-		 * D0 = 1 for each device if protected.
-		 * If at least one device is protected the sector is marked
-		 * protected, but return failure. Mixed protected and
-		 * unprotected devices within a sector should never happen.
-		 */
-		value = addr[2] & (FPW) 0x00010001;
-		if (value == 0)
-			info->protect[sector] = 0;
-		else if (value == (FPW) 0x00010001)
-			info->protect[sector] = 1;
-		else {
-			/* error, mixed protected and unprotected */
-			rcode = 1;
-			info->protect[sector] = 1;
-		}
-		if (info->protect[sector] != prot)
-			rcode = 1;	/* failed to protect/unprotect as requested */
-
-		/* reload all protection bits from hardware for now */
-		flash_sync_real_protect(info);
-		break;
-
-	case FLASH_AM640U:
-	default:
-		/* no hardware protect that we support */
-		info->protect[sector] = prot;
-		break;
-	}
-
-	return rcode;
-}
-#endif
diff --git a/board/mx1fs2/intel.h b/board/mx1fs2/intel.h
deleted file mode 100644
index 8db5dd4f64c..00000000000
--- a/board/mx1fs2/intel.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) 2002 ETC s.r.o.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the ETC s.r.o. nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Written by Marcel Telka <marcel@telka.sk>, 2002.
- *
- * Documentation:
- * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A,
- *     28F320J3A (x8/x16)", April 2002, Order Number: 290667-011
- * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18,
- *     28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005
- *
- * This file is taken from OpenWinCE project hosted by SourceForge.net
- *
- */
-
-#ifndef	FLASH_INTEL_H
-#define	FLASH_INTEL_H
-
-#include <common.h>
-
-/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */
-
-#define	CFI_INTEL_CMD_READ_ARRAY		0xFF	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_READ_IDENTIFIER		0x90	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_READ_QUERY		0x98	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_READ_STATUS_REGISTER	0x70	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_CLEAR_STATUS_REGISTER	0x50	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_PROGRAM1			0x40	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_PROGRAM2			0x10	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_WRITE_TO_BUFFER		0xE8	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_CONFIRM			0xD0	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_BLOCK_ERASE		0x20	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_SUSPEND			0xB0	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_RESUME			0xD0	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_LOCK_SETUP		0x60	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_LOCK_BLOCK		0x01	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_UNLOCK_BLOCK		0xD0	/* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_CMD_LOCK_DOWN_BLOCK		0x2F	/* 28FxxxK3, 28FxxxK18 */
-
-/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */
-
-#define	CFI_INTEL_SR_READY			1 << 7	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_SR_ERASE_SUSPEND		1 << 6	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_SR_ERASE_ERROR		1 << 5	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_SR_PROGRAM_ERROR		1 << 4	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_SR_VPEN_ERROR			1 << 3	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_SR_PROGRAM_SUSPEND		1 << 2	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_SR_BLOCK_LOCKED		1 << 1	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define	CFI_INTEL_SR_BEFP			1 << 0	/* 28FxxxK3, 28FxxxK18 */
-
-/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */
-
-#define	CFI_CHIP_INTEL_28F320J3A		0x0016
-#define	CFI_CHIPN_INTEL_28F320J3A		"28F320J3A"
-#define	CFI_CHIP_INTEL_28F640J3A		0x0017
-#define	CFI_CHIPN_INTEL_28F640J3A		"28F640J3A"
-#define	CFI_CHIP_INTEL_28F128J3A		0x0018
-#define	CFI_CHIPN_INTEL_28F128J3A		"28F128J3A"
-
-/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */
-
-#define	CFI_CHIP_INTEL_28F640K3			0x8801
-#define	CFI_CHIPN_INTEL_28F640K3		"28F640K3"
-#define	CFI_CHIP_INTEL_28F128K3			0x8802
-#define	CFI_CHIPN_INTEL_28F128K3		"28F128K3"
-#define	CFI_CHIP_INTEL_28F256K3			0x8803
-#define	CFI_CHIPN_INTEL_28F256K3		"28F256K3"
-#define	CFI_CHIP_INTEL_28F640K18		0x8805
-#define	CFI_CHIPN_INTEL_28F640K18		"28F640K18"
-#define	CFI_CHIP_INTEL_28F128K18		0x8806
-#define	CFI_CHIPN_INTEL_28F128K18		"28F128K18"
-#define	CFI_CHIP_INTEL_28F256K18		0x8807
-#define	CFI_CHIPN_INTEL_28F256K18		"28F256K18"
-
-#endif				/* FLASH_INTEL_H */
diff --git a/board/mx1fs2/lowlevel_init.S b/board/mx1fs2/lowlevel_init.S
deleted file mode 100644
index 56a4819b089..00000000000
--- a/board/mx1fs2/lowlevel_init.S
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- * 02111-1307, USA.
- *
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/imx-regs.h>
-
-.globl lowlevel_init
-lowlevel_init:
-
-	mov	r10, lr
-
-/* Change PERCLK1DIV to 14 ie 14+1 */
-	ldr		r0,	=PCDR
-	ldr		r1,	=CONFIG_SYS_PCDR_VAL
-	str		r1,   [r0]
-
-/* set MCU PLL Control Register 0 */
-
-	ldr		r0,	=MPCTL0
-	ldr		r1,	=CONFIG_SYS_MPCTL0_VAL
-	str		r1,   [r0]
-
-/* set MCU PLL Control Register 1 */
-
-	ldr		r0,	=MPCTL1
-	ldr		r1,	=CONFIG_SYS_MPCTL1_VAL
-	str		r1,   [r0]
-
-/* set mpll restart bit */
-	ldr		r0, =CSCR
-	ldr		r1, [r0]
-	orr		r1,r1,#(1<<21)
-	str		r1, [r0]
-
-	mov		r2,#0x10
-1:
-	mov		r3,#0x2000
-2:
-	subs	r3,r3,#1
-	bne		2b
-
-	subs	r2,r2,#1
-	bne		1b
-
-/* set System PLL Control Register 0 */
-
-	ldr		r0,	=SPCTL0
-	ldr		r1,	=CONFIG_SYS_SPCTL0_VAL
-	str		r1,   [r0]
-
-/* set System PLL Control Register 1 */
-
-	ldr		r0,	=SPCTL1
-	ldr		r1,	=CONFIG_SYS_SPCTL1_VAL
-	str		r1,   [r0]
-
-/* set spll restart bit */
-	ldr		r0, =CSCR
-	ldr		r1, [r0]
-	orr		r1,r1,#(1<<22)
-	str		r1, [r0]
-
-	mov		r2,#0x10
-1:
-	mov		r3,#0x2000
-2:
-	subs	r3,r3,#1
-	bne		2b
-
-	subs	r2,r2,#1
-	bne		1b
-
-	ldr		r0,   =CSCR
-	ldr		r1,   =CONFIG_SYS_CSCR_VAL
-	str		r1,   [r0]
-
-	ldr		r0,   =GPCR
-	ldr		r1,   =CONFIG_SYS_GPCR_VAL
-	str		r1,   [r0]
-
-/*
- * I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
- * this.....
- *
- * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15
- * register 1, this stops it using the output of the PLL and thus runs at the
- * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never
- * use the value set in the CM_OSC registers...regardless of what you set it
- * too!  Thus, although i thought i was running at 140MHz, i'm actually running
- * at 40!..
- *
- * Slapping this into my bootloader does the trick...
- *
- * MRC p15,0,r0,c1,c0,0    ; read core configuration register
- * ORR r0,r0,#0xC0000000   ; set asynchronous clocks and not fastbus mode
- * MCR p15,0,r0,c1,c0,0    ; write modified value to core configuration
- * register
- *
- */
-	MRC p15,0,r0,c1,c0,0
-/*	ORR r0,r0,#0xC0000000 async mode */
-/*	ORR r0,r0,#0x40000000 sync mode */
-	ORR r0,r0,#0xC0000000
-	MCR p15,0,r0,c1,c0,0
-
-	ldr		r0,	=GIUS(0)
-	ldr		r1,	=CONFIG_SYS_GIUS_A_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=FMCR
-	ldr		r1,	=CONFIG_SYS_FMCR_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=CS0U
-	ldr		r1,	=CONFIG_SYS_CS0U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=CS0L
-	ldr		r1,	=CONFIG_SYS_CS0L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=CS1U
-	ldr		r1,	=CONFIG_SYS_CS1U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=CS1L
-	ldr		r1,	=CONFIG_SYS_CS1L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=CS4U
-	ldr		r1,	=CONFIG_SYS_CS4U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=CS4L
-	ldr		r1,	=CONFIG_SYS_CS4L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=CS5U
-	ldr		r1,	=CONFIG_SYS_CS5U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=CS5L
-	ldr		r1,	=CONFIG_SYS_CS5L_VAL
-	str		r1,   [r0]
-
-/* SDRAM Setup */
-
-	ldr  r1,=0x00221000   /* adr of SDCTRL0			*/
-	ldr  r0,=0x92120200
-	str  r0,[r1,#0]       /* put in precharge command mode    */
-	ldr  r2,=0x08200000   /* adr for precharge cmd	   */
-	ldr  r0,[r2,#0]       /* precharge			   */
-	ldr  r0,=0xA2120200
-	ldr  r2,=0x08000000   /* start of SDRAM		   */
-	str  r0,[r1,#0]       /* put in auto-refresh mode	   */
-	ldr  r0,[r2,#0]       /* auto-refresh		   */
-	ldr  r0,[r2,#0]       /* auto-refresh		   */
-	ldr  r0,[r2,#0]       /* auto-refresh		   */
-	ldr  r0,[r2,#0]       /* auto-refresh		   */
-	ldr  r0,[r2,#0]       /* auto-refresh		   */
-	ldr  r0,[r2,#0]       /* auto-refresh		   */
-	ldr  r0,[r2,#0]       /* auto-refresh		   */
-	ldr  r0,=0xB2120200
-	ldr  r2,=0x08111800
-	str  r0,[r1,#0]       /* setup for mode register of SDRAM */
-	ldr  r0,[r2,#0]       /* program mode register	   */
-	ldr  r0,=0x82124267
-	str  r0,[r1,#0]       /* back to normal operation	   */
-
-	mov	pc,r10
diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c
deleted file mode 100644
index 90a33c24992..00000000000
--- a/board/mx1fs2/mx1fs2.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <asm/arch/imx-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
-
-extern void imx_gpio_mode(int gpio_mode);
-
-static void logo_init(void)
-{
-	imx_gpio_mode(PD15_PF_LD0);
-	imx_gpio_mode(PD16_PF_LD1);
-	imx_gpio_mode(PD17_PF_LD2);
-	imx_gpio_mode(PD18_PF_LD3);
-	imx_gpio_mode(PD19_PF_LD4);
-	imx_gpio_mode(PD20_PF_LD5);
-	imx_gpio_mode(PD21_PF_LD6);
-	imx_gpio_mode(PD22_PF_LD7);
-	imx_gpio_mode(PD23_PF_LD8);
-	imx_gpio_mode(PD24_PF_LD9);
-	imx_gpio_mode(PD25_PF_LD10);
-	imx_gpio_mode(PD26_PF_LD11);
-	imx_gpio_mode(PD27_PF_LD12);
-	imx_gpio_mode(PD28_PF_LD13);
-	imx_gpio_mode(PD29_PF_LD14);
-	imx_gpio_mode(PD30_PF_LD15);
-	imx_gpio_mode(PD14_PF_FLM_VSYNC);
-	imx_gpio_mode(PD13_PF_LP_HSYNC);
-	imx_gpio_mode(PD6_PF_LSCLK);
-	imx_gpio_mode(GPIO_PORTD | GPIO_OUT | GPIO_DR);
-	imx_gpio_mode(PD11_PF_CONTRAST);
-	imx_gpio_mode(PD10_PF_SPL_SPR);
-
-	LCDC_RMCR = 0x00000000;
-	LCDC_PCR = PCR_COLOR | PCR_PBSIZ_8 | PCR_BPIX_16 | PCR_PCD(5);
-	LCDC_HCR = HCR_H_WIDTH(2);
-	LCDC_VCR = VCR_V_WIDTH(2);
-
-	LCDC_PWMR = 0x00000380;   /* contrast to 0x80 middle (is best !!!) */
-	LCDC_SSA  = 0x10040000;   /* image in flash */
-
-	LCDC_SIZE = SIZE_XMAX(320) | SIZE_YMAX(240);   /* screen size */
-
-	LCDC_VPW  = 0x000000A0;   /* Virtual Page Width Register */
-	LCDC_POS  = 0x00000000;   /* panning offset 0 (0 pixel offset) */
-
-	/* disable Cursor */
-	LCDC_CPOS  = 0x00000000;
-
-	/* fixed burst length */
-	LCDC_DMACR = DMACR_BURST | DMACR_HM(8) | DMACR_TM(2);
-
-	/* enable LCD */
-	DR(3)   |= 0x00001000;
-	LCDC_RMCR = RMCR_LCDC_EN;
-
-}
-
-int
-board_init(void)
-{
-	gd->bd->bi_arch_number = MACH_TYPE_MX1FS2;
-	gd->bd->bi_boot_params = 0x08000100;
-serial_init();
-	logo_init();
-	return 0;
-}
-
-int
-dram_init(void)
-{
-#if ( CONFIG_NR_DRAM_BANKS > 0 )
-	gd->bd->bi_dram[0].start = MX1FS2_SDRAM_1;
-	gd->bd->bi_dram[0].size = MX1FS2_SDRAM_1_SIZE;
-#endif
-	return 0;
-}
-
-/**
- * show_boot_progress: - indicate state of the boot process
- *
- * @param status: Status number - see README for details.
- *
- */
-
-void
-show_boot_progress(int status)
-{
-	/* We use this as a hook to disable serial ports just before booting
-	 * This way we suppress the "uncompressing linux..." message
-	 */
-#ifdef CONFIG_SILENT_CONSOLE
-	if( status == 8) {
-		if( getenv("silent") != NULL ) {
-			*(volatile unsigned long *)0x206080 &= ~1;
-			*(volatile unsigned long *)0x207080 &= ~1;
-		}
-	}
-#endif
-	return;
-}