diff options
| author | Adam Ford | 2020-06-29 18:49:41 -0500 |
|---|---|---|
| committer | Lokesh Vutla | 2020-07-13 20:58:34 +0530 |
| commit | 7bb33e4684aaee9e4e36dc673d32f4539f96d91a (patch) | |
| tree | 3a4e3ae811a5f4f3e222238157481034318c6266 /board | |
| parent | 5f1600e03e7dd29f010fc0867a0bbea64d1520d0 (diff) | |
ARM: da850-evm: Unify config options with Kconfig
There are two options that are currently whitelisted, but they
are redundant, because there are not necessary since Kconfig options
exist to basically state the same thing.
CONFIG_DIRECT_NOR_BOOT and CONFIG_USE_NOR are both set together and
only used by the da850 when booting from NOR, however the only time
CONFIG_MTD_NOR_FLASH is configured is when booting from NOR. Since
NOR doesn't need SPL, the options for SPL can be moved to a check for
building SPL instead of checking for NOR.
This patch removes the checks for these two config options and unifies
the checks around the Kconfig option of CONFIG_MTD_NOR_FLASH.
Since this board is the only board that uses these two config options,
they can be removed from the whitelist table.
Signed-off-by: Adam Ford <aford173@gmail.com>
Diffstat (limited to 'board')
| -rw-r--r-- | board/davinci/da8xxevm/da850evm.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index a3b0f8bf092..c91aeb8dbf5 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -205,7 +205,7 @@ int misc_init_r(void) } static const struct pinmux_config gpio_pins[] = { -#ifdef CONFIG_USE_NOR +#ifdef CONFIG_MTD_NOR_FLASH /* GP0[11] is required for NOR to work on Rev 3 EVMs */ { pinmux(0), 8, 4 }, /* GP0[11] */ #endif @@ -235,7 +235,7 @@ const struct pinmux_resource pinmuxes[] = { PINMUX_ITEM(emifa_pins_cs3), PINMUX_ITEM(emifa_pins_cs4), PINMUX_ITEM(emifa_pins_nand), -#elif defined(CONFIG_USE_NOR) +#elif defined(CONFIG_MTD_NOR_FLASH) PINMUX_ITEM(emifa_pins_cs2), PINMUX_ITEM(emifa_pins_nor), #endif @@ -341,7 +341,7 @@ int board_init(void) DAVINCI_SYSCFG_SUSPSRC_UART2), &davinci_syscfg_regs->suspsrc); -#ifdef CONFIG_USE_NOR +#ifdef CONFIG_MTD_NOR_FLASH /* Set the GPIO direction as output */ clrbits_le32((u32 *)GPIO_BANK0_REG_DIR_ADDR, (0x01 << 11)); |