mpc8xx: remove rbc823 board support

This board is old enough and has no maintainer.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

5 files changed, 0 insertions, 1054 deletions

diff --git a/board/rbc823/Makefile b/board/rbc823/Makefile
deleted file mode 100644
index 060a144a92e..00000000000
--- a/board/rbc823/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= rbc823.o flash.o kbd.o
diff --git a/board/rbc823/flash.c b/board/rbc823/flash.c
deleted file mode 100644
index 8a2265263c8..00000000000
--- a/board/rbc823/flash.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*
- * Functions
- */
-static ulong flash_get_size(vu_long *addr, flash_info_t *info);
-static int write_word(flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets(ulong base, flash_info_t *info);
-
-unsigned long flash_init(void)
-{
-	unsigned long size_b0;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-
-	/* Detect size */
-	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE,
-			&flash_info[0]);
-
-	/* Setup offsets */
-	flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* Monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-	flash_info[0].size = size_b0;
-
-	return size_b0;
-}
-
-/*-----------------------------------------------------------------------
- * Fix this to support variable sector sizes
-*/
-static void flash_get_offsets(ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
-		/* set sector offsets for bottom boot block type	*/
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		puts("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf("AMD ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf("FUJITSU ");
-		break;
-	case FLASH_MAN_BM:
-		printf("BRIGHT MICRO ");
-		break;
-	default:
-		printf("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:
-		printf("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
-		break;
-	case FLASH_AM400B:
-		printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400T:
-		printf("AM29LV400T (4 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM800B:
-		printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM800T:
-		printf("AM29LV800T (8 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM160B:
-		printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM160T:
-		printf("AM29LV160T (16 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM320B:
-		printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM320T:
-		printf("AM29LV320T (32 Mbit, top boot sector)\n");
-		break;
-	default:
-		printf("Unknown Chip Type\n");
-		break;
-	}
-
-	if (info->size >> 20) {
-		printf("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20,
-			info->sector_count);
-	} else {
-		printf("  Size: %ld KB in %d Sectors\n",
-			info->size >> 10,
-			info->sector_count);
-	}
-
-	puts("  Sector Start Addresses:");
-
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			puts("\n   ");
-
-		printf(" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-
-	putc('\n');
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size(vu_long *addr, flash_info_t *info)
-{
-	short i;
-	volatile unsigned char *caddr;
-	char value;
-
-	caddr = (volatile unsigned char *)addr ;
-
-	/* Write auto select command: read Manufacturer ID */
-
-	debug("Base address is: %8p\n", caddr);
-
-	caddr[0x0555] = 0xAA;
-	caddr[0x02AA] = 0x55;
-	caddr[0x0555] = 0x90;
-
-	value = caddr[0];
-
-	debug("Manufact ID: %02x\n", value);
-
-	switch (value) {
-	case 0x01:	/*AMD_MANUFACT*/
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-
-	case 0x04:	/*FUJ_MANUFACT*/
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		break;
-	}
-
-	value = caddr[1];			/* device ID		*/
-
-	debug("Device ID: %02x\n", value);
-
-	switch (value) {
-	case AMD_ID_LV040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x00080000;
-		break;				/* => 512Kb		*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return 0;			/* => no or unknown flash */
-	}
-
-	flash_get_offsets((ulong)addr, &flash_info[0]);
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/*
-		 * read sector protection at sector address,
-		 * (A7 .. A0) = 0x02
-		 * D0 = 1 if protected
-		 */
-		caddr = (volatile unsigned char *)(info->start[i]);
-		info->protect[i] = caddr[2] & 1;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		caddr = (volatile unsigned char *)info->start[0];
-		*caddr = 0xF0;	/* reset bank */
-	}
-
-	return info->size;
-}
-
-
-int	flash_erase(flash_info_t *info, int s_first, int s_last)
-{
-	volatile unsigned char *addr =
-		(volatile unsigned char *)(info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN)
-			printf("- missing\n");
-		else
-			printf("- no sectors to erase\n");
-
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect])
-			prot++;
-	}
-
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0xAA;
-	addr[0x02AA] = 0x55;
-	addr[0x0555] = 0x80;
-	addr[0x0555] = 0xAA;
-	addr[0x02AA] = 0x55;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (volatile unsigned char *)(info->start[sect]);
-			addr[0] = 0x30;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay(1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer(0);
-	last  = start;
-	addr = (volatile unsigned char *)(info->start[l_sect]);
-
-	while ((addr[0] & 0xFF) != 0xFF) {
-		now = get_timer(start);
-		if (now > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (volatile unsigned char *)info->start[0];
-
-	addr[0] = 0xF0;	/* reset bank */
-
-	printf(" done\n");
-	return 0;
-}
-
-/*
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	l = addr - wp;
-
-	if (l != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp)
-			data = (data << 8) | (*(uchar *)cp);
-
-		for (; i < 4 && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-
-		for (; cnt == 0 && i < 4; ++i, ++cp)
-			data = (data << 8) | (*(uchar *)cp);
-
-		rc = write_word(info, wp, data);
-
-		if (rc != 0)
-			return rc;
-
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i = 0; i < 4; ++i)
-			data = (data << 8) | *src++;
-
-		rc = write_word(info, wp, data);
-
-		if (rc != 0)
-			return rc;
-
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0)
-		return 0;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < 4; ++i, ++cp)
-		data = (data << 8) | (*(uchar *)cp);
-
-	return write_word(info, wp, data);
-}
-
-/*
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word(flash_info_t *info, ulong dest, ulong data)
-{
-	volatile unsigned char *cdest, *cdata;
-	volatile unsigned char *addr =
-		(volatile unsigned char *)(info->start[0]);
-	ulong start;
-	int flag, count = 4 ;
-
-	cdest = (volatile unsigned char *)dest ;
-	cdata = (volatile unsigned char *)&data ;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest)&data) != data)
-		return 2;
-
-	while (count--) {
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr[0x0555] = 0xAA;
-		addr[0x02AA] = 0x55;
-		addr[0x0555] = 0xA0;
-
-		*cdest = *cdata;
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		/* data polling for D7 */
-		start = get_timer(0);
-		while ((*cdest ^ *cdata) & 0x80) {
-			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
-				return 1;
-		}
-
-		cdata++ ;
-		cdest++ ;
-	}
-	return 0;
-}
diff --git a/board/rbc823/kbd.c b/board/rbc823/kbd.c
deleted file mode 100644
index b35509ab399..00000000000
--- a/board/rbc823/kbd.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* Modified by Udi Finkelstein
- *
- * This file includes communication routines for SMC1 that can run even if
- * SMC2 have already been initialized.
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <commproc.h>
-#include <stdio_dev.h>
-#include <lcd.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define	SMC_INDEX	0
-#define PROFF_SMC	PROFF_SMC1
-#define CPM_CR_CH_SMC	CPM_CR_CH_SMC1
-
-#define RBC823_KBD_BAUDRATE	38400
-#define CPM_KEYBOARD_BASE	0x1000
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-void smc1_setbrg (void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile cpm8xx_t *cp = &(im->im_cpm);
-
-	/* Set up the baud rate generator.
-	 * See 8xx_io/commproc.c for details.
-	 *
-	 * Wire BRG2 to SMC1, BRG1 to SMC2
-	 */
-
-	cp->cp_simode = 0x00001000;
-
-	cp->cp_brgc2 =
-		(((gd->cpu_clk / 16 / RBC823_KBD_BAUDRATE)-1) << 1) | CPM_BRG_EN;
-}
-
-int smc1_init (void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile smc_t *sp;
-	volatile smc_uart_t *up;
-	volatile cbd_t *tbdf, *rbdf;
-	volatile cpm8xx_t *cp = &(im->im_cpm);
-	uint	dpaddr;
-
-	/* initialize pointers to SMC */
-
-	sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]);
-	up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC];
-
-	/* Disable transmitter/receiver.
-	*/
-	sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
-	/* Enable SDMA.
-	*/
-	im->im_siu_conf.sc_sdcr = 1;
-
-	/* clear error conditions */
-#ifdef	CONFIG_SYS_SDSR
-	im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR;
-#else
-	im->im_sdma.sdma_sdsr = 0x83;
-#endif
-
-	/* clear SDMA interrupt mask */
-#ifdef	CONFIG_SYS_SDMR
-	im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR;
-#else
-	im->im_sdma.sdma_sdmr = 0x00;
-#endif
-
-	/* Use Port B for SMC1 instead of other functions.
-	*/
-	cp->cp_pbpar |=  0x000000c0;
-	cp->cp_pbdir &= ~0x000000c0;
-	cp->cp_pbodr &= ~0x000000c0;
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-	dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
-#else
-	dpaddr = CPM_KEYBOARD_BASE ;
-#endif
-
-	/* Allocate space for two buffer descriptors in the DP ram.
-	 * For now, this address seems OK, but it may have to
-	 * change with newer versions of the firmware.
-	 * damm: allocating space after the two buffers for rx/tx data
-	 */
-
-	rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
-	rbdf->cbd_bufaddr = (uint) (rbdf+2);
-	rbdf->cbd_sc = 0;
-	tbdf = rbdf + 1;
-	tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
-	tbdf->cbd_sc = 0;
-
-	/* Set up the uart parameters in the parameter ram.
-	*/
-	up->smc_rbase = dpaddr;
-	up->smc_tbase = dpaddr+sizeof(cbd_t);
-	up->smc_rfcr = SMC_EB;
-	up->smc_tfcr = SMC_EB;
-
-	/* Set UART mode, 8 bit, no parity, one stop.
-	 * Enable receive and transmit.
-	 */
-	sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-	/* Mask all interrupts and remove anything pending.
-	*/
-	sp->smc_smcm = 0;
-	sp->smc_smce = 0xff;
-
-	/* Set up the baud rate generator.
-	*/
-	smc1_setbrg ();
-
-	/* Make the first buffer the only buffer.
-	*/
-	tbdf->cbd_sc |= BD_SC_WRAP;
-	rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
-	/* Single character receive.
-	*/
-	up->smc_mrblr = 1;
-	up->smc_maxidl = 0;
-
-	/* Initialize Tx/Rx parameters.
-	*/
-
-	while (cp->cp_cpcr & CPM_CR_FLG)  /* wait if cp is busy */
-	  ;
-
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
-	while (cp->cp_cpcr & CPM_CR_FLG)  /* wait if cp is busy */
-	  ;
-
-	/* Enable transmitter/receiver.
-	*/
-	sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
-	return (0);
-}
-
-void smc1_putc(const char c)
-{
-	volatile cbd_t		*tbdf;
-	volatile char		*buf;
-	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-
-	tbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_tbase];
-
-	/* Wait for last character to go.
-	*/
-
-	buf = (char *)tbdf->cbd_bufaddr;
-
-	*buf = c;
-	tbdf->cbd_datlen = 1;
-	tbdf->cbd_sc |= BD_SC_READY;
-	__asm__("eieio");
-
-	while (tbdf->cbd_sc & BD_SC_READY) {
-		WATCHDOG_RESET ();
-		__asm__("eieio");
-	}
-}
-
-int smc1_getc(void)
-{
-	volatile cbd_t		*rbdf;
-	volatile unsigned char	*buf;
-	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
-	unsigned char		c;
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-
-	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
-	/* Wait for character to show up.
-	*/
-	buf = (unsigned char *)rbdf->cbd_bufaddr;
-
-	while (rbdf->cbd_sc & BD_SC_EMPTY)
-		WATCHDOG_RESET ();
-
-	c = *buf;
-	rbdf->cbd_sc |= BD_SC_EMPTY;
-
-	return(c);
-}
-
-int smc1_tstc(void)
-{
-	volatile cbd_t		*rbdf;
-	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-
-	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
-	return(!(rbdf->cbd_sc & BD_SC_EMPTY));
-}
-
-/* search for keyboard and register it if found */
-int drv_keyboard_init(void)
-{
-	int error = 0;
-	struct stdio_dev kbd_dev;
-
-	if (0) {
-		/* register the keyboard */
-		memset (&kbd_dev, 0, sizeof(struct stdio_dev));
-		strcpy(kbd_dev.name, "kbd");
-		kbd_dev.flags =  DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
-		kbd_dev.putc = NULL;
-		kbd_dev.puts = NULL;
-		kbd_dev.getc = smc1_getc;
-		kbd_dev.tstc = smc1_tstc;
-		error = stdio_register (&kbd_dev);
-	} else {
-		lcd_is_enabled = 0;
-		lcd_disable();
-	}
-	return error;
-}
diff --git a/board/rbc823/rbc823.c b/board/rbc823/rbc823.c
deleted file mode 100644
index 5881111c70e..00000000000
--- a/board/rbc823/rbc823.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include "mpc8xx.h"
-#include <linux/mtd/doc2000.h>
-
-extern int kbd_init(void);
-extern int drv_kbd_init(void);
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-const uint sdram_table[] =
-{
-	/*
-	 * Single Read. (Offset 0 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
-	0x1FF77C47, /* last */
-	/*
-	 * SDRAM Initialization (offset 5 in UPMA RAM)
-	 *
-	 * This is no UPM entry point. The following definition uses
-	 * the remaining space to establish an initialization
-	 * sequence, which is executed by a RUN command.
-	 *
-	 */
-		    0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */
-	/*
-	 * Burst Read. (Offset 8 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
-	0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Single Write. (Offset 18 in UPMA RAM)
-	 */
-	0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Burst Write. (Offset 20 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
-	0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
-					    _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Refresh  (Offset 30 in UPMA RAM)
-	 */
-	0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
-	0xFFFFFC84, 0xFFFFFC07, /* last */
-				_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Exception. (Offset 3c in UPMA RAM)
-	 */
-	0x1FF7FC07, /* last */
-		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-const uint static_table[] =
-{
-	/*
-	 * Single Read. (Offset 0 in UPMA RAM)
-	 */
-	0x0FFFFC04, 0x0FF3FC04, 0x0FF3CC04, 0x0FF3CC04,
-	0x0FF3EC04, 0x0FF3CC00, 0x0FF7FC04, 0x3FFFFC04,
-	0xFFFFFC04, 0xFFFFFC05, /* last */
-				_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Single Write. (Offset 18 in UPMA RAM)
-	 */
-	0x0FFFFC04, 0x00FFFC04, 0x00FFFC04, 0x00FFFC04,
-	0x01FFFC00, 0x3FFFFC04, 0xFFFFFC04, 0xFFFFFC05, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- *
- * Test TQ ID string (TQM8xx...)
- * If present, check for "L" type (no second DRAM bank),
- * otherwise "L" type is assumed as default.
- *
- * Return 1 for "L" type, 0 else.
- */
-
-int checkboard (void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	if (i < 0 || strncmp(buf, "TQM8", 4)) {
-		printf ("### No HW ID - assuming RBC823\n");
-		return (0);
-	}
-
-	puts(buf);
-	putc('\n');
-
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size_b0, size8, size9;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	/*
-	 * 1 Bank of 64Mbit x 2 devices
-	 */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K;
-	memctl->memc_mar = 0x00000088;
-
-	/*
-	 * Map controller SDRAM bank 0
-	 */
-	memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
-	memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
-	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
-	udelay (200);
-
-	/*
-	 * Perform SDRAM initializsation sequence
-	 */
-	memctl->memc_mcr = 0x80008105;	/* SDRAM bank 0 */
-	udelay (1);
-	memctl->memc_mamr = (CONFIG_SYS_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_8X;
-	udelay (200);
-	memctl->memc_mcr = 0x80008130;	/* SDRAM bank 0 - execute twice */
-	udelay (1);
-	memctl->memc_mamr = (CONFIG_SYS_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_4X;
-	udelay (200);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-	udelay (1000);
-
-	/*
-	 * Preliminary prescaler for refresh (depends on number of
-	 * banks): This value is selected for four cycles every 62.4 us
-	 * with two SDRAM banks or four cycles every 31.2 us with one
-	 * bank. It will be adjusted after memory sizing.
-	 */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;	/* 16: but should be: CONFIG_SYS_MPTPR_1BK_4K */
-
-	/*
-	 * Check Bank 0 Memory Size for re-configuration
-	 *
-	 * try 8 column mode
-	 */
-	size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE4_PRELIM,
-			   SDRAM_MAX_SIZE);
-	udelay (1000);
-
-	/*
-	 * try 9 column mode
-	 */
-	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE4_PRELIM,
-			   SDRAM_MAX_SIZE);
-
-	if (size8 < size9) {	/* leave configuration at 9 columns     */
-		size_b0 = size9;
-/*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
-	} else {		/* back to 8 columns                    */
-		size_b0 = size8;
-		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
-		udelay (500);
-/*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
-	}
-
-	udelay (1000);
-
-	/*
-	 * Adjust refresh rate depending on SDRAM type, both banks
-	 * For types > 128 MBit leave it at the current (fast) rate
-	 */
-	if ((size_b0 < 0x02000000)) {
-		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
-		udelay (1000);
-	}
-
-	/* SDRAM Bank 0 is bigger - map first       */
-
-	memctl->memc_or4 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
-	memctl->memc_br4 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
-	udelay (10000);
-
-	return (size_b0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
-			   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mamr = mamr_value;
-
-	return (get_ram_size (base, maxsize));
-}
-
-#ifdef CONFIG_CMD_DOC
-void doc_init (void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	upmconfig (UPMB, (uint *) static_table,
-		   sizeof (static_table) / sizeof (uint));
-	memctl->memc_mbmr = MAMR_DSA_1_CYCL;
-
-	doc_probe (FLASH_BASE1_PRELIM);
-}
-#endif
diff --git a/board/rbc823/u-boot.lds b/board/rbc823/u-boot.lds
deleted file mode 100644
index 7676cf43b17..00000000000
--- a/board/rbc823/u-boot.lds
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-
-    lib/built-in.o			(.text*)
-    net/built-in.o			(.text*)
-    arch/powerpc/cpu/mpc8xx/built-in.o	(.text*)
-    arch/powerpc/lib/built-in.o		(.text*)
-
-    . = env_offset;
-    common/env_embedded.o		(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}