arm: remove the H2200 board

U-Boot cannot be built for h2200_defconfig with CONFIG_DM=y.

The maintainer Lukasz Dalek suggested to remove the board.
https://lists.denx.de/pipermail/u-boot/2019-August/380685.html

Cc: Lukasz Dalek <luk0104@gmail.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[trini: As this is the last non-toradex PXA board, update travis too]
Signed-off-by: Tom Rini <trini@konsulko.com>

5 files changed, 0 insertions, 114 deletions

diff --git a/board/h2200/Kconfig b/board/h2200/Kconfig
deleted file mode 100644
index c0e0c1e7639..00000000000
--- a/board/h2200/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_H2200
-
-config SYS_BOARD
-	default "h2200"
-
-config SYS_CONFIG_NAME
-	default "h2200"
-
-endif
diff --git a/board/h2200/MAINTAINERS b/board/h2200/MAINTAINERS
deleted file mode 100644
index b66ff515cfe..00000000000
--- a/board/h2200/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-H2200 BOARD
-M:	Lukasz Dalek <luk0104@gmail.com>
-S:	Maintained
-F:	board/h2200/
-F:	include/configs/h2200.h
-F:	configs/h2200_defconfig
diff --git a/board/h2200/Makefile b/board/h2200/Makefile
deleted file mode 100644
index 690b7661788..00000000000
--- a/board/h2200/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# h2200 Support
-#
-# Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
-
-obj-y	:= h2200.o
-
-extra-y := h2200-header.bin
-
-$(obj)/h2200-header.bin: $(obj)/h2200-header.o
-	$(OBJCOPY) -O binary $< $@
diff --git a/board/h2200/h2200-header.S b/board/h2200/h2200-header.S
deleted file mode 100644
index be8b7fb923d..00000000000
--- a/board/h2200/h2200-header.S
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * iPAQ h2200 header
- *
- * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
- */
-
-	.word 0xea0003fe /* b 0x1000 */
-
-	.org 0x40
-	.ascii "ECEC"
-
-	.org 0x1000 - 1
-	.byte 0x0
diff --git a/board/h2200/h2200.c b/board/h2200/h2200.c
deleted file mode 100644
index e1b7b2ce8a1..00000000000
--- a/board/h2200/h2200.c
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * iPAQ h2200 board configuration
- *
- * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
- */
-
-#include <common.h>
-#include <asm/arch/pxa.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/io.h>
-#include <usb.h>
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_eth_init(bd_t *bis)
-{
-	usb_eth_initialize(bis);
-	return 0;
-}
-
-void reset_cpu(ulong ignore)
-{
-	/* Enable VLIO interface on Hamcop */
-	writeb(0x1, 0x4000);
-
-	/* Reset board (cold reset) */
-	writeb(0xff, 0x4002);
-}
-
-int board_init(void)
-{
-	/* We have RAM, disable cache */
-	dcache_disable();
-	icache_disable();
-
-	gd->bd->bi_arch_number = MACH_TYPE_H2200;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa0000100;
-
-	/* Let host see that device is disconnected */
-	udc_disconnect();
-	mdelay(500);
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	/*
-	 * Everything except MSC0 was already set up by
-	 * 1st stage bootloader.
-	 *
-	 * This setting enables access to companion chip.
-	 */
-	clrsetbits_le32(MSC0, 0xffffffff, CONFIG_SYS_MSC0_VAL);
-	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-	return 0;
-}
-
-#ifdef CONFIG_USB_GADGET_PXA2XX
-int board_usb_init(int index, enum usb_init_type init)
-{
-	return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	return 0;
-}
-#endif