Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

6 files changed, 68 insertions, 7 deletions

diff --git a/board/denx/m28evk/README b/board/denx/m28evk/README
new file mode 100644
index 00000000000..cb3ae20f862
--- /dev/null
+++ b/board/denx/m28evk/README
@@ -0,0 +1,13 @@
+DENX M28EVK
+===========
+
+Files of the M28/M28EVK port
+----------------------------
+
+arch/arm/cpu/arm926ejs/mxs/	- The CPU support code for the Freescale i.MX28
+arch/arm/include/asm/arch-mxs/	- Header files for the Freescale i.MX28
+board/denx/m28evk/		- M28EVK board specific files
+include/configs/m28evk.h	- M28EVK configuration file
+
+Follow the instructions from doc/README.mxs to generate a bootable SD card or to
+boot from NAND flash.
diff --git a/board/freescale/mx28evk/README b/board/freescale/mx28evk/README
new file mode 100644
index 00000000000..524f3fc4945
--- /dev/null
+++ b/board/freescale/mx28evk/README
@@ -0,0 +1,46 @@
+FREESCALE MX28EVK
+==================
+
+Supported hardware: only MX28EVK rev D is supported in U-boot.
+
+Files of the MX28EVK port
+--------------------------
+
+arch/arm/cpu/arm926ejs/mxs/	- The CPU support code for the Freescale i.MX28
+arch/arm/include/asm/arch-mxs/	- Header files for the Freescale i.MX28
+board/freescale/mx28evk/	- MX28EVK board specific files
+include/configs/mx28evk.h	- MX28EVK configuration file
+
+Jumper configuration
+---------------------
+
+To boot MX28EVK from an SD card, set the boot mode DIP switches as:
+
+   * Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42)
+   * JTAG PSWITCH RESET: To the right (reset disabled)
+   * Battery Source: Down
+   * Wall 5V: Up
+   * VDD 5V: To the left (off)
+   * Hold Button: Down (off)
+
+
+Environment Storage
+-------------------
+
+There are two targets for mx28evk:
+
+"make mx28evk_config"		- store enviroment variables into MMC
+
+or
+
+"make mx28evk_nand_config"	- store enviroment variables into NAND flash
+
+Choose the target accordingly.
+
+Note: The mx28evk board does not come with a NAND flash populated from the
+factory. It comes with an empty slot (U23), which allows the insertion of a
+48-pin TSOP flash device.
+
+Follow the instructions from doc/README.mxs to generate a bootable SD card.
+
+Insert the SD card in slot 0, power up the board and U-boot will boot.
diff --git a/board/freescale/mx6qsabresd/Makefile b/board/freescale/mx6sabresd/Makefile
index 569377260a6..ff3c94b74a8 100644
--- a/board/freescale/mx6qsabresd/Makefile
+++ b/board/freescale/mx6sabresd/Makefile
@@ -23,7 +23,7 @@ include $(TOPDIR)/config.mk
 
 LIB    = $(obj)lib$(BOARD).o
 
-COBJS  := mx6qsabresd.o
+COBJS  := mx6sabresd.o
 
 SRCS   := $(COBJS:.o=.c)
 OBJS   := $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 25298261455..222ee98c0d2 100644
--- a/board/freescale/mx6qsabresd/mx6qsabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -17,12 +17,10 @@
  * GNU General Public License for more details.
  */
 
-#include <common.h>
-#include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/iomux.h>
-#include <asm/arch/mx6q_pins.h>
+#include <asm/arch/mx6-pins.h>
 #include <asm/errno.h>
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
@@ -291,7 +289,6 @@ int board_late_init(void)
 
 int checkboard(void)
 {
-	puts("Board: MX6Q-SabreSD\n");
-
+	puts("Board: MX6-SabreSD\n");
 	return 0;
 }
diff --git a/board/wandboard/README b/board/wandboard/README
index ce83bbe4c5e..498db2fd471 100644
--- a/board/wandboard/README
+++ b/board/wandboard/README
@@ -22,6 +22,11 @@ To build U-Boot for the Wandboard Solo version:
 $ make wandboard_solo_config
 $ make
 
+To build U-Boot for the Wandboard Quad version:
+
+$ make wandboard_quad_config
+$ make
+
 Flashing U-boot into the SD card
 --------------------------------
 
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index 5666cbf26f2..43c02acfd1d 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -48,7 +48,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init(void)
 {
-	gd->ram_size = CONFIG_DDR_MB * SZ_1M;
+	gd->ram_size = (phys_size_t)CONFIG_DDR_MB * 1024 * 1024;
 
 	return 0;
 }