Convert CONFIG_SHOW_BOOT_PROGRESS to Kconfig

This converts the following to Kconfig:
   CONFIG_SHOW_BOOT_PROGRESS

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 162 insertions, 0 deletions

diff --git a/common/Kconfig b/common/Kconfig
index b556b59e9f0..28d5e9a0ccf 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -125,6 +125,168 @@ config BOOTSTAGE_STASH_SIZE
 	  This should be large enough to hold the bootstage stash. A value of
 	  4096 (4KiB) is normally plenty.
 
+config SHOW_BOOT_PROGRESS
+	bool "Show boot progress in a board-specific manner"
+	help
+	  Defining this option allows to add some board-specific code (calling
+	  a user-provided function show_boot_progress(int) that enables you to
+	  show the system's boot progress on some display (for example, some
+	  LEDs) on your board. At the moment, the following checkpoints are
+	  implemented:
+
+	  Legacy uImage format:
+
+	  Arg	Where			When
+	    1	common/cmd_bootm.c	before attempting to boot an image
+	   -1	common/cmd_bootm.c	Image header has bad	 magic number
+	    2	common/cmd_bootm.c	Image header has correct magic number
+	   -2	common/cmd_bootm.c	Image header has bad	 checksum
+	    3	common/cmd_bootm.c	Image header has correct checksum
+	   -3	common/cmd_bootm.c	Image data   has bad	 checksum
+	    4	common/cmd_bootm.c	Image data   has correct checksum
+	   -4	common/cmd_bootm.c	Image is for unsupported architecture
+	    5	common/cmd_bootm.c	Architecture check OK
+	   -5	common/cmd_bootm.c	Wrong Image Type (not kernel, multi)
+	    6	common/cmd_bootm.c	Image Type check OK
+	   -6	common/cmd_bootm.c	gunzip uncompression error
+	   -7	common/cmd_bootm.c	Unimplemented compression type
+	    7	common/cmd_bootm.c	Uncompression OK
+	    8	common/cmd_bootm.c	No uncompress/copy overwrite error
+	   -9	common/cmd_bootm.c	Unsupported OS (not Linux, BSD, VxWorks, QNX)
+
+	    9	common/image.c		Start initial ramdisk verification
+	  -10	common/image.c		Ramdisk header has bad	   magic number
+	  -11	common/image.c		Ramdisk header has bad	   checksum
+	   10	common/image.c		Ramdisk header is OK
+	  -12	common/image.c		Ramdisk data   has bad	   checksum
+	   11	common/image.c		Ramdisk data   has correct checksum
+	   12	common/image.c		Ramdisk verification complete, start loading
+	  -13	common/image.c		Wrong Image Type (not PPC Linux ramdisk)
+	   13	common/image.c		Start multifile image verification
+	   14	common/image.c		No initial ramdisk, no multifile, continue.
+
+	   15	arch/<arch>/lib/bootm.c All preparation done, transferring control to OS
+
+	  -30	arch/powerpc/lib/board.c	Fatal error, hang the system
+	  -31	post/post.c		POST test failed, detected by post_output_backlog()
+	  -32	post/post.c		POST test failed, detected by post_run_single()
+
+	   34	common/cmd_doc.c	before loading a Image from a DOC device
+	  -35	common/cmd_doc.c	Bad usage of "doc" command
+	   35	common/cmd_doc.c	correct usage of "doc" command
+	  -36	common/cmd_doc.c	No boot device
+	   36	common/cmd_doc.c	correct boot device
+	  -37	common/cmd_doc.c	Unknown Chip ID on boot device
+	   37	common/cmd_doc.c	correct chip ID found, device available
+	  -38	common/cmd_doc.c	Read Error on boot device
+	   38	common/cmd_doc.c	reading Image header from DOC device OK
+	  -39	common/cmd_doc.c	Image header has bad magic number
+	   39	common/cmd_doc.c	Image header has correct magic number
+	  -40	common/cmd_doc.c	Error reading Image from DOC device
+	   40	common/cmd_doc.c	Image header has correct magic number
+	   41	common/cmd_ide.c	before loading a Image from a IDE device
+	  -42	common/cmd_ide.c	Bad usage of "ide" command
+	   42	common/cmd_ide.c	correct usage of "ide" command
+	  -43	common/cmd_ide.c	No boot device
+	   43	common/cmd_ide.c	boot device found
+	  -44	common/cmd_ide.c	Device not available
+	   44	common/cmd_ide.c	Device available
+	  -45	common/cmd_ide.c	wrong partition selected
+	   45	common/cmd_ide.c	partition selected
+	  -46	common/cmd_ide.c	Unknown partition table
+	   46	common/cmd_ide.c	valid partition table found
+	  -47	common/cmd_ide.c	Invalid partition type
+	   47	common/cmd_ide.c	correct partition type
+	  -48	common/cmd_ide.c	Error reading Image Header on boot device
+	   48	common/cmd_ide.c	reading Image Header from IDE device OK
+	  -49	common/cmd_ide.c	Image header has bad magic number
+	   49	common/cmd_ide.c	Image header has correct magic number
+	  -50	common/cmd_ide.c	Image header has bad	 checksum
+	   50	common/cmd_ide.c	Image header has correct checksum
+	  -51	common/cmd_ide.c	Error reading Image from IDE device
+	   51	common/cmd_ide.c	reading Image from IDE device OK
+	   52	common/cmd_nand.c	before loading a Image from a NAND device
+	  -53	common/cmd_nand.c	Bad usage of "nand" command
+	   53	common/cmd_nand.c	correct usage of "nand" command
+	  -54	common/cmd_nand.c	No boot device
+	   54	common/cmd_nand.c	boot device found
+	  -55	common/cmd_nand.c	Unknown Chip ID on boot device
+	   55	common/cmd_nand.c	correct chip ID found, device available
+	  -56	common/cmd_nand.c	Error reading Image Header on boot device
+	   56	common/cmd_nand.c	reading Image Header from NAND device OK
+	  -57	common/cmd_nand.c	Image header has bad magic number
+	   57	common/cmd_nand.c	Image header has correct magic number
+	  -58	common/cmd_nand.c	Error reading Image from NAND device
+	   58	common/cmd_nand.c	reading Image from NAND device OK
+
+	  -60	common/env_common.c	Environment has a bad CRC, using default
+
+	   64	net/eth.c		starting with Ethernet configuration.
+	  -64	net/eth.c		no Ethernet found.
+	   65	net/eth.c		Ethernet found.
+
+	  -80	common/cmd_net.c	usage wrong
+	   80	common/cmd_net.c	before calling net_loop()
+	  -81	common/cmd_net.c	some error in net_loop() occurred
+	   81	common/cmd_net.c	net_loop() back without error
+	  -82	common/cmd_net.c	size == 0 (File with size 0 loaded)
+	   82	common/cmd_net.c	trying automatic boot
+	   83	common/cmd_net.c	running "source" command
+	  -83	common/cmd_net.c	some error in automatic boot or "source" command
+	   84	common/cmd_net.c	end without errors
+
+	  FIT uImage format:
+
+	  Arg	Where			When
+	  100	common/cmd_bootm.c	Kernel FIT Image has correct format
+	  -100	common/cmd_bootm.c	Kernel FIT Image has incorrect format
+	  101	common/cmd_bootm.c	No Kernel subimage unit name, using configuration
+	  -101	common/cmd_bootm.c	Can't get configuration for kernel subimage
+	  102	common/cmd_bootm.c	Kernel unit name specified
+	  -103	common/cmd_bootm.c	Can't get kernel subimage node offset
+	  103	common/cmd_bootm.c	Found configuration node
+	  104	common/cmd_bootm.c	Got kernel subimage node offset
+	  -104	common/cmd_bootm.c	Kernel subimage hash verification failed
+	  105	common/cmd_bootm.c	Kernel subimage hash verification OK
+	  -105	common/cmd_bootm.c	Kernel subimage is for unsupported architecture
+	  106	common/cmd_bootm.c	Architecture check OK
+	  -106	common/cmd_bootm.c	Kernel subimage has wrong type
+	  107	common/cmd_bootm.c	Kernel subimage type OK
+	  -107	common/cmd_bootm.c	Can't get kernel subimage data/size
+	  108	common/cmd_bootm.c	Got kernel subimage data/size
+	  -108	common/cmd_bootm.c	Wrong image type (not legacy, FIT)
+	  -109	common/cmd_bootm.c	Can't get kernel subimage type
+	  -110	common/cmd_bootm.c	Can't get kernel subimage comp
+	  -111	common/cmd_bootm.c	Can't get kernel subimage os
+	  -112	common/cmd_bootm.c	Can't get kernel subimage load address
+	  -113	common/cmd_bootm.c	Image uncompress/copy overwrite error
+
+	  120	common/image.c		Start initial ramdisk verification
+	  -120	common/image.c		Ramdisk FIT image has incorrect format
+	  121	common/image.c		Ramdisk FIT image has correct format
+	  122	common/image.c		No ramdisk subimage unit name, using configuration
+	  -122	common/image.c		Can't get configuration for ramdisk subimage
+	  123	common/image.c		Ramdisk unit name specified
+	  -124	common/image.c		Can't get ramdisk subimage node offset
+	  125	common/image.c		Got ramdisk subimage node offset
+	  -125	common/image.c		Ramdisk subimage hash verification failed
+	  126	common/image.c		Ramdisk subimage hash verification OK
+	  -126	common/image.c		Ramdisk subimage for unsupported architecture
+	  127	common/image.c		Architecture check OK
+	  -127	common/image.c		Can't get ramdisk subimage data/size
+	  128	common/image.c		Got ramdisk subimage data/size
+	  129	common/image.c		Can't get ramdisk load address
+	  -129	common/image.c		Got ramdisk load address
+
+	  -130	common/cmd_doc.c	Incorrect FIT image format
+	  131	common/cmd_doc.c	FIT image format OK
+
+	  -140	common/cmd_ide.c	Incorrect FIT image format
+	  141	common/cmd_ide.c	FIT image format OK
+
+	  -150	common/cmd_nand.c	Incorrect FIT image format
+	  151	common/cmd_nand.c	FIT image format OK
+
 endmenu
 
 menu "Boot media"