Patch by Kenneth Johansson, 30 Jun 2003:

get rid of MK_CMD_ENTRY macro; update doc/README.command

1 files changed, 16 insertions, 16 deletions

diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 203e803a148..3856f3d1015 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -867,38 +867,38 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 /***************************************************/
 
-cmd_tbl_t U_BOOT_CMD(IMD) = MK_CMD_ENTRY(
-	"imd",	4,	1,	do_i2c_md,		\
+U_BOOT_CMD(
+	imd,	4,	1,	do_i2c_md,		\
 	"imd     - i2c memory display\n",				\
 	"chip address[.0, .1, .2] [# of objects]\n    - i2c memory display\n" \
 );
 
-cmd_tbl_t U_BOOT_CMD(IMM) = MK_CMD_ENTRY(
- 	"imm",	3,	1,	do_i2c_mm,
+U_BOOT_CMD(
+ 	imm,	3,	1,	do_i2c_mm,
 	"imm     - i2c memory modify (auto-incrementing)\n",
 	"chip address[.0, .1, .2]\n"
 	"    - memory modify, auto increment address\n"
 );
-cmd_tbl_t U_BOOT_CMD(INM) = MK_CMD_ENTRY(
-	"inm",	3,	1,	do_i2c_nm,
+U_BOOT_CMD(
+	inm,	3,	1,	do_i2c_nm,
 	"inm     - memory modify (constant address)\n",
 	"chip address[.0, .1, .2]\n    - memory modify, read and keep address\n"
 );
 
-cmd_tbl_t U_BOOT_CMD(IMW) = MK_CMD_ENTRY(
-	"imw",	5,	1,	do_i2c_mw,
+U_BOOT_CMD(
+	imw,	5,	1,	do_i2c_mw,
 	"imw     - memory write (fill)\n",
 	"chip address[.0, .1, .2] value [count]\n    - memory write (fill)\n"
 );
 
-cmd_tbl_t U_BOOT_CMD(ICRC) = MK_CMD_ENTRY(
-	"icrc32",	5,	1,	do_i2c_crc,
+U_BOOT_CMD(
+	icrc32,	5,	1,	do_i2c_crc,
 	"icrc32  - checksum calculation\n",
 	"chip address[.0, .1, .2] count\n    - compute CRC32 checksum\n"
 );
 
-cmd_tbl_t U_BOOT_CMD(IPROBE) = MK_CMD_ENTRY(
-	"iprobe",	1,	1,	do_i2c_probe,
+U_BOOT_CMD(
+	iprobe,	1,	1,	do_i2c_probe,
 	"iprobe  - probe to discover valid I2C chip addresses\n",
 	"\n    -discover valid I2C chip addresses\n"
 );
@@ -906,16 +906,16 @@ cmd_tbl_t U_BOOT_CMD(IPROBE) = MK_CMD_ENTRY(
 /*
  * Require full name for "iloop" because it is an infinite loop!
  */
-cmd_tbl_t U_BOOT_CMD(ILOOP) = MK_CMD_ENTRY(
-	"iloop",	5,	1,	do_i2c_loop,
+U_BOOT_CMD(
+	iloop,	5,	1,	do_i2c_loop,
 	"iloop   - infinite loop on address range\n",
 	"chip address[.0, .1, .2] [# of objects]\n"
 	"    - loop, reading a set of addresses\n"
 );
 
 #if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
-cmd_tbl_t U_BOOT_CMD(ISDRAM) = MK_CMD_ENTRY(
-	"isdram",	2,	1,	do_sdram,
+U_BOOT_CMD(
+	isdram,	2,	1,	do_sdram,
 	"isdram  - print SDRAM configuration information\n",
 	"chip\n    - print SDRAM configuration information\n"
 	"      (valid chip values 50..57)\n"