part/dev_desc: Add log2 of blocksize to block_dev_desc data struct

log2 of the device block size serves as the shift value used to calculate
the block number to read in file systems when implementing avaiable block
sizes.
It is needed quite often in file systems thus it is pre-calculated and
stored in the block device descriptor.

Signed-off-by: Egbert Eich <eich@suse.com>

4 files changed, 11 insertions, 0 deletions

diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 0105bdbb7f9..78b4aa70ba7 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -455,6 +455,8 @@ void ide_init(void)
 		ide_dev_desc[i].dev = i;
 		ide_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
 		ide_dev_desc[i].blksz = 0;
+		ide_dev_desc[i].log2blksz =
+			LOG2_INVALID(typeof(ide_dev_desc[i].log2blksz));
 		ide_dev_desc[i].lba = 0;
 		ide_dev_desc[i].block_read = ide_read;
 		ide_dev_desc[i].block_write = ide_write;
@@ -806,6 +808,7 @@ static void ide_ident(block_dev_desc_t *dev_desc)
 	/* assuming HD */
 	dev_desc->type = DEV_TYPE_HARDDISK;
 	dev_desc->blksz = ATA_BLOCKSIZE;
+	dev_desc->log2blksz = LOG2(dev_desc->blksz);
 	dev_desc->lun = 0;	/* just to fill something in... */
 
 #if 0				/* only used to test the powersaving mode,
@@ -1448,6 +1451,7 @@ static void atapi_inquiry(block_dev_desc_t *dev_desc)
 	dev_desc->lun = 0;
 	dev_desc->lba = 0;
 	dev_desc->blksz = 0;
+	dev_desc->log2blksz = LOG2_INVALID(typeof(dev_desc->log2blksz));
 	dev_desc->type = iobuf[0] & 0x1f;
 
 	if ((iobuf[1] & 0x80) == 0x80)
@@ -1492,6 +1496,7 @@ static void atapi_inquiry(block_dev_desc_t *dev_desc)
 	dev_desc->blksz = ((unsigned long) iobuf[4] << 24) +
 		((unsigned long) iobuf[5] << 16) +
 		((unsigned long) iobuf[6] << 8) + ((unsigned long) iobuf[7]);
+	dev_desc->log2blksz = LOG2(dev_desc->blksz);
 #ifdef CONFIG_LBA48
 	/* ATAPI devices cannot use 48bit addressing (ATA/ATAPI v7) */
 	dev_desc->lba48 = 0;
diff --git a/common/cmd_sata.c b/common/cmd_sata.c
index 8d57285d053..5a57a379443 100644
--- a/common/cmd_sata.c
+++ b/common/cmd_sata.c
@@ -44,6 +44,7 @@ int __sata_initialize(void)
 		sata_dev_desc[i].type = DEV_TYPE_HARDDISK;
 		sata_dev_desc[i].lba = 0;
 		sata_dev_desc[i].blksz = 512;
+		sata_dev_desc[i].log2blksz = LOG2(sata_dev_desc[i].blksz);
 		sata_dev_desc[i].block_read = sata_read;
 		sata_dev_desc[i].block_write = sata_write;
 
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index 13b3d996f64..294d9f577e3 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -106,6 +106,8 @@ void scsi_scan(int mode)
 		scsi_dev_desc[i].lun=0xff;
 		scsi_dev_desc[i].lba=0;
 		scsi_dev_desc[i].blksz=0;
+		scsi_dev_desc[i].log2blksz =
+			LOG2_INVALID(typeof(scsi_dev_desc[i].log2blksz));
 		scsi_dev_desc[i].type=DEV_TYPE_UNKNOWN;
 		scsi_dev_desc[i].vendor[0]=0;
 		scsi_dev_desc[i].product[0]=0;
@@ -166,6 +168,8 @@ void scsi_scan(int mode)
 			}
 			scsi_dev_desc[scsi_max_devs].lba=capacity;
 			scsi_dev_desc[scsi_max_devs].blksz=blksz;
+			scsi_dev_desc[scsi_max_devs].log2blksz =
+				LOG2(scsi_dev_desc[scsi_max_devs].blksz);
 			scsi_dev_desc[scsi_max_devs].type=perq;
 			init_part(&scsi_dev_desc[scsi_max_devs]);
 removable:
diff --git a/common/usb_storage.c b/common/usb_storage.c
index fb322b4015f..c5db044165c 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -1430,6 +1430,7 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *ss,
 			*capacity, *blksz);
 	dev_desc->lba = *capacity;
 	dev_desc->blksz = *blksz;
+	dev_desc->log2blksz = LOG2(dev_desc->blksz);
 	dev_desc->type = perq;
 	USB_STOR_PRINTF(" address %d\n", dev_desc->target);
 	USB_STOR_PRINTF("partype: %d\n", dev_desc->part_type);