Merge branch 'master' of git://git.denx.de/u-boot

17 files changed, 177 insertions, 101 deletions

diff --git a/common/Kconfig b/common/Kconfig
index fd84fa08bd3..f82bc88a12b 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -1,5 +1,4 @@
 menu "Command line interface"
-	depends on !SPL_BUILD
 
 config HUSH_PARSER
 	bool "Use hush shell"
@@ -153,6 +152,29 @@ endmenu
 
 menu "Device access commands"
 
+config CMD_DM
+	bool "dm - Access to driver model information"
+	depends on DM
+	default y
+	help
+	  Provides access to driver model data structures and information,
+	  such as a list of devices, list of uclasses and the state of each
+	  device (e.g. activated). This is not required for operation, but
+	  can be useful to see the state of driver model for debugging or
+	  interest.
+
+config CMD_DEMO
+	bool "demo - Demonstration commands for driver model"
+	depends on DM
+	help
+	  Provides a 'demo' command which can be used to play around with
+	  driver model. To use this properly you will need to enable one or
+	  both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
+	  Otherwise you will always get an empty list of devices. The demo
+	  devices are defined in the sandbox device tree, so the easiest
+	  option is to use sandbox and pass the -d point to sandbox's
+	  u-boot.dtb file.
+
 config CMD_LOADB
 	bool "loadb"
 	help
diff --git a/common/board_f.c b/common/board_f.c
index bdad36b2606..4d8b8a626be 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -573,48 +573,22 @@ static int reserve_fdt(void)
 	return 0;
 }
 
-static int reserve_stacks(void)
+int arch_reserve_stacks(void)
 {
-#ifdef CONFIG_SPL_BUILD
-# ifdef CONFIG_ARM
-	gd->start_addr_sp -= 128;	/* leave 32 words for abort-stack */
-	gd->irq_sp = gd->start_addr_sp;
-# endif
-#else
-# ifdef CONFIG_PPC
-	ulong *s;
-# endif
+	return 0;
+}
 
-	/* setup stack pointer for exceptions */
+static int reserve_stacks(void)
+{
+	/* make stack pointer 16-byte aligned */
 	gd->start_addr_sp -= 16;
 	gd->start_addr_sp &= ~0xf;
-	gd->irq_sp = gd->start_addr_sp;
 
 	/*
-	 * Handle architecture-specific things here
-	 * TODO(sjg@chromium.org): Perhaps create arch_reserve_stack()
-	 * to handle this and put in arch/xxx/lib/stack.c
+	 * let the architecture specific code tailor gd->start_addr_sp and
+	 * gd->irq_sp
 	 */
-# if defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
-#  ifdef CONFIG_USE_IRQ
-	gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
-	debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
-		CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ, gd->start_addr_sp);
-
-	/* 8-byte alignment for ARM ABI compliance */
-	gd->start_addr_sp &= ~0x07;
-#  endif
-	/* leave 3 words for abort-stack, plus 1 for alignment */
-	gd->start_addr_sp -= 16;
-# elif defined(CONFIG_PPC)
-	/* Clear initial stack frame */
-	s = (ulong *) gd->start_addr_sp;
-	*s = 0; /* Terminate back chain */
-	*++s = 0; /* NULL return address */
-# endif /* Architecture specific code */
-
-	return 0;
-#endif
+	return arch_reserve_stacks();
 }
 
 static int display_new_sp(void)
@@ -909,7 +883,7 @@ static init_fnc_t init_sequence_f[] = {
 #endif
 	announce_dram_init,
 	/* TODO: unify all these dram functions? */
-#if defined(CONFIG_ARM) || defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE)
+#if defined(CONFIG_ARM) || defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32)
 	dram_init,		/* configure available RAM banks */
 #endif
 #if defined(CONFIG_MIPS) || defined(CONFIG_PPC)
@@ -1075,4 +1049,22 @@ void board_init_f_r(void)
 	/* NOTREACHED - board_init_r() does not return */
 	hang();
 }
+#else
+ulong board_init_f_mem(ulong top)
+{
+	/* Leave space for the stack we are running with now */
+	top -= 0x40;
+
+	top -= sizeof(struct global_data);
+	top = ALIGN(top, 16);
+	gd = (struct global_data *)top;
+	memset((void *)gd, '\0', sizeof(*gd));
+
+#ifdef CONFIG_SYS_MALLOC_F_LEN
+	top -= CONFIG_SYS_MALLOC_F_LEN;
+	gd->malloc_base = top;
+#endif
+
+	return top;
+}
 #endif /* CONFIG_X86 */
diff --git a/common/board_r.c b/common/board_r.c
index 907b33cca76..4fcd4f6a705 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -55,6 +55,9 @@
 #include <dm/root.h>
 #include <linux/compiler.h>
 #include <linux/err.h>
+#ifdef CONFIG_AVR32
+#include <asm/arch/mmu.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -459,6 +462,18 @@ static int initr_env(void)
 	return 0;
 }
 
+#ifdef CONFIG_SYS_BOOTPARAMS_LEN
+static int initr_malloc_bootparams(void)
+{
+	gd->bd->bi_boot_params = (ulong)malloc(CONFIG_SYS_BOOTPARAMS_LEN);
+	if (!gd->bd->bi_boot_params) {
+		puts("WARNING: Cannot allocate space for boot parameters\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_SC3
 /* TODO: with new initcalls, move this into the driver */
 extern void sc3_read_eeprom(void);
@@ -486,7 +501,7 @@ static int initr_api(void)
 #endif
 
 /* enable exceptions */
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_AVR32)
 static int initr_enable_interrupts(void)
 {
 	enable_interrupts();
@@ -775,6 +790,9 @@ init_fnc_t init_sequence_r[] = {
 	initr_dataflash,
 #endif
 	initr_env,
+#ifdef CONFIG_SYS_BOOTPARAMS_LEN
+	initr_malloc_bootparams,
+#endif
 	INIT_FUNC_WATCHDOG_RESET
 	initr_secondary_cpu,
 #ifdef CONFIG_SC3
@@ -810,10 +828,10 @@ init_fnc_t init_sequence_r[] = {
 	initr_kgdb,
 #endif
 	interrupt_init,
-#if defined(CONFIG_ARM)
+#if defined(CONFIG_ARM) || defined(CONFIG_AVR32)
 	initr_enable_interrupts,
 #endif
-#if defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE)
+#if defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32)
 	timer_init,		/* initialize timer */
 #endif
 #if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
@@ -878,6 +896,10 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 	int i;
 #endif
 
+#ifdef CONFIG_AVR32
+	mmu_init_r(dest_addr);
+#endif
+
 #if !defined(CONFIG_X86) && !defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
 	gd = new_gd;
 #endif
diff --git a/common/bootm.c b/common/bootm.c
index e2dc16486b3..34f60bbb531 100644
--- a/common/bootm.c
+++ b/common/bootm.c
@@ -233,7 +233,7 @@ static int bootm_find_fdt(int flag, int argc, char * const argv[])
 		return 1;
 	}
 
-	set_working_fdt_addr(images.ft_addr);
+	set_working_fdt_addr((ulong)images.ft_addr);
 
 	return 0;
 }
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index e9eab232f96..aa81da227b9 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -345,8 +345,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	bd_t *bd = gd->bd;
 
 	print_num("boot_params",	(ulong)bd->bi_boot_params);
-	print_num("memstart",		(ulong)bd->bi_memstart);
-	print_lnum("memsize",		(u64)bd->bi_memsize);
+	print_num("memstart",		(ulong)bd->bi_dram[0].start);
+	print_lnum("memsize",		(u64)bd->bi_dram[0].size);
 	print_num("flashstart",		(ulong)bd->bi_flashstart);
 	print_num("flashsize",		(ulong)bd->bi_flashsize);
 	print_num("flashoffset",	(ulong)bd->bi_flashoffset);
diff --git a/common/cmd_blob.c b/common/cmd_blob.c
index 82ecaf09e5e..d3f22a1afc9 100644
--- a/common/cmd_blob.c
+++ b/common/cmd_blob.c
@@ -90,17 +90,19 @@ static char blob_help_text[] =
 	"enc src dst len km - Encapsulate and create blob of data\n"
 	"                          $len bytes long at address $src and\n"
 	"                          store the result at address $dst.\n"
-	"                          $km is the 16 byte key modifier\n"
-	"                          is also required for generation/use as\n"
-	"                          key for cryptographic operation. Key\n"
-	"                          modifier should be 16 byte long.\n"
+	"                          $km is the address where the key\n"
+	"                          modifier is stored.\n"
+	"                          The modifier is required for generation\n"
+	"                          /use as key for cryptographic operation.\n"
+	"                          Key modifier should be 16 byte long.\n"
 	"blob dec src dst len km - Decapsulate the  blob of data at address\n"
 	"                          $src and store result of $len byte at\n"
 	"                          addr $dst.\n"
-	"                          $km is the 16 byte key modifier\n"
-	"                          is also required for generation/use as\n"
-	"                          key for cryptographic operation. Key\n"
-	"                          modifier should be 16 byte long.\n";
+	"                          $km is the address where the key\n"
+	"                          modifier is stored.\n"
+	"                          The modifier is required for generation\n"
+	"                          /use as key for cryptographic operation.\n"
+	"                          Key modifier should be 16 byte long.\n";
 
 U_BOOT_CMD(
 	blob, 6, 1, do_blob,
diff --git a/common/cmd_demo.c b/common/cmd_demo.c
index bcb34d90456..8a10bdf42a8 100644
--- a/common/cmd_demo.c
+++ b/common/cmd_demo.c
@@ -97,7 +97,9 @@ static int do_demo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 				ARRAY_SIZE(demo_commands));
 	argc -= 2;
 	argv += 2;
-	if (!demo_cmd || argc > demo_cmd->maxargs)
+
+	if ((!demo_cmd || argc > demo_cmd->maxargs) ||
+	    ((demo_cmd->name[0] != 'l') && (argc < 1)))
 		return CMD_RET_USAGE;
 
 	if (argc) {
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index dc59fab8280..48b3e704157 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -38,13 +38,13 @@ static int is_printable_string(const void *data, int len);
  */
 struct fdt_header *working_fdt;
 
-void set_working_fdt_addr(void *addr)
+void set_working_fdt_addr(ulong addr)
 {
 	void *buf;
 
-	buf = map_sysmem((ulong)addr, 0);
+	buf = map_sysmem(addr, 0);
 	working_fdt = buf;
-	setenv_addr("fdtaddr", addr);
+	setenv_ulong("fdtaddr", addr);
 }
 
 /*
@@ -111,7 +111,7 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			if (!blob || !fdt_valid(&blob))
 				return 1;
 			printf("The address of the fdt is %#08lx\n",
-			       control ? (ulong)blob :
+			       control ? (ulong)map_to_sysmem(blob) :
 					getenv_hex("fdtaddr", 0));
 			return 0;
 		}
@@ -123,7 +123,7 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		if (control)
 			gd->fdt_blob = blob;
 		else
-			set_working_fdt_addr((void *)blob);
+			set_working_fdt_addr(addr);
 
 		if (argc >= 2) {
 			int  len;
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 7c3ad00fdf0..ad38cbf6e17 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -342,9 +342,10 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
 	int ret;
 #ifdef CONFIG_DM_I2C
 	struct udevice *dev;
+	struct dm_i2c_chip *i2c_chip;
 #endif
 
-	if (argc != 5)
+	if ((argc < 5) || (argc > 6))
 		return cmd_usage(cmdtp);
 
 	/*
@@ -367,7 +368,7 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
 		return cmd_usage(cmdtp);
 
 	/*
-	 * Length is the number of objects, not number of bytes.
+	 * Length is the number of bytes.
 	 */
 	length = simple_strtoul(argv[4], NULL, 16);
 
@@ -377,22 +378,47 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
 		ret = i2c_set_chip_offset_len(dev, alen);
 	if (ret)
 		return i2c_report_err(ret, I2C_ERR_WRITE);
+	i2c_chip = dev_get_parent_platdata(dev);
+	if (!i2c_chip)
+		return i2c_report_err(ret, I2C_ERR_WRITE);
 #endif
 
-	while (length-- > 0) {
+	if (argc == 6 && !strcmp(argv[5], "-s")) {
+		/*
+		 * Write all bytes in a single I2C transaction. If the target
+		 * device is an EEPROM, it is your responsibility to not cross
+		 * a page boundary. No write delay upon completion, take this
+		 * into account if linking commands.
+		 */
 #ifdef CONFIG_DM_I2C
-		ret = dm_i2c_write(dev, devaddr++, memaddr++, 1);
+		i2c_chip->flags &= ~DM_I2C_CHIP_WR_ADDRESS;
+		ret = dm_i2c_write(dev, devaddr, memaddr, length);
 #else
-		ret = i2c_write(chip, devaddr++, alen, memaddr++, 1);
+		ret = i2c_write(chip, devaddr, alen, memaddr, length);
 #endif
 		if (ret)
 			return i2c_report_err(ret, I2C_ERR_WRITE);
+	} else {
+		/*
+		 * Repeated addressing - perform <length> separate
+		 * write transactions of one byte each
+		 */
+		while (length-- > 0) {
+#ifdef CONFIG_DM_I2C
+			i2c_chip->flags |= DM_I2C_CHIP_WR_ADDRESS;
+			ret = dm_i2c_write(dev, devaddr++, memaddr++, 1);
+#else
+			ret = i2c_write(chip, devaddr++, alen, memaddr++, 1);
+#endif
+			if (ret)
+				return i2c_report_err(ret, I2C_ERR_WRITE);
 /*
  * No write delay with FRAM devices.
  */
 #if !defined(CONFIG_SYS_I2C_FRAM)
-		udelay(11000);
+			udelay(11000);
 #endif
+		}
 	}
 	return 0;
 }
@@ -518,7 +544,7 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
 		ret = i2c_read(chip, addr, alen, linebuf, linebytes);
 #endif
 		if (ret)
-			i2c_report_err(ret, I2C_ERR_READ);
+			return i2c_report_err(ret, I2C_ERR_READ);
 		else {
 			printf("%04x:", addr);
 			cp = linebuf;
@@ -616,7 +642,7 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
 		ret = i2c_write(chip, addr++, alen, &byte, 1);
 #endif
 		if (ret)
-			i2c_report_err(ret, I2C_ERR_WRITE);
+			return i2c_report_err(ret, I2C_ERR_WRITE);
 		/*
 		 * Wait for the write to complete.  The write can take
 		 * up to 10mSec (we allow a little more time).
@@ -798,16 +824,15 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
 		ret = i2c_read(chip, addr, alen, (uchar *)&data, size);
 #endif
 		if (ret)
-			i2c_report_err(ret, I2C_ERR_READ);
-		else {
-			data = cpu_to_be32(data);
-			if (size == 1)
-				printf(" %02lx", (data >> 24) & 0x000000FF);
-			else if (size == 2)
-				printf(" %04lx", (data >> 16) & 0x0000FFFF);
-			else
-				printf(" %08lx", data);
-		}
+			return i2c_report_err(ret, I2C_ERR_READ);
+
+		data = cpu_to_be32(data);
+		if (size == 1)
+			printf(" %02lx", (data >> 24) & 0x000000FF);
+		else if (size == 2)
+			printf(" %04lx", (data >> 16) & 0x0000FFFF);
+		else
+			printf(" %08lx", data);
 
 		nbytes = cli_readline(" ? ");
 		if (nbytes == 0) {
@@ -848,7 +873,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
 						(uchar *)&data, size);
 #endif
 				if (ret)
-					i2c_report_err(ret, I2C_ERR_WRITE);
+					return i2c_report_err(ret,
+							      I2C_ERR_WRITE);
 #ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
 				udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
@@ -1730,7 +1756,7 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const
 #endif
 	if (argc == 1) {
 #ifdef CONFIG_DM_I2C
-		speed = i2c_get_bus_speed(bus);
+		speed = dm_i2c_get_bus_speed(bus);
 #else
 		speed = i2c_get_bus_speed();
 #endif
@@ -1740,7 +1766,7 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const
 		speed = simple_strtoul(argv[1], NULL, 10);
 		printf("Setting bus speed to %d Hz\n", speed);
 #ifdef CONFIG_DM_I2C
-		ret = i2c_set_bus_speed(bus, speed);
+		ret = dm_i2c_set_bus_speed(bus, speed);
 #else
 		ret = i2c_set_bus_speed(speed);
 #endif
@@ -1827,7 +1853,7 @@ static cmd_tbl_t cmd_i2c_sub[] = {
 	U_BOOT_CMD_MKENT(nm, 2, 1, do_i2c_nm, "", ""),
 	U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""),
 	U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""),
-	U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""),
+	U_BOOT_CMD_MKENT(write, 6, 0, do_i2c_write, "", ""),
 #ifdef CONFIG_DM_I2C
 	U_BOOT_CMD_MKENT(flags, 2, 1, do_i2c_flags, "", ""),
 #endif
@@ -1894,7 +1920,8 @@ static char i2c_help_text[] =
 	"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
 	"i2c probe [address] - test for and show device(s) on the I2C bus\n"
 	"i2c read chip address[.0, .1, .2] length memaddress - read to memory\n"
-	"i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n"
+	"i2c write memaddress chip address[.0, .1, .2] length [-s] - write memory\n"
+	"          to I2C; the -s option selects bulk write in a single transaction\n"
 #ifdef CONFIG_DM_I2C
 	"i2c flags chip [flags] - set or get chip flags\n"
 #endif
@@ -1906,7 +1933,7 @@ static char i2c_help_text[] =
 #endif
 
 U_BOOT_CMD(
-	i2c, 6, 1, do_i2c,
+	i2c, 7, 1, do_i2c,
 	"I2C sub-system",
 	i2c_help_text
 );
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 4e28c9d7a4d..1335e3d344c 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -85,8 +85,12 @@ static void print_mmcinfo(struct mmc *mmc)
 	printf("Tran Speed: %d\n", mmc->tran_speed);
 	printf("Rd Block Len: %d\n", mmc->read_bl_len);
 
-	printf("%s version %d.%d\n", IS_SD(mmc) ? "SD" : "MMC",
-			(mmc->version >> 8) & 0xf, mmc->version & 0xff);
+	printf("%s version %d.%d", IS_SD(mmc) ? "SD" : "MMC",
+			EXTRACT_SDMMC_MAJOR_VERSION(mmc->version),
+			EXTRACT_SDMMC_MINOR_VERSION(mmc->version));
+	if (EXTRACT_SDMMC_CHANGE_VERSION(mmc->version) != 0)
+		printf(".%d", EXTRACT_SDMMC_CHANGE_VERSION(mmc->version));
+	printf("\n");
 
 	printf("High Capacity: %s\n", mmc->high_capacity ? "Yes" : "No");
 	puts("Capacity: ");
diff --git a/common/hash.c b/common/hash.c
index d154d029e9c..9e9f84b9fb4 100644
--- a/common/hash.c
+++ b/common/hash.c
@@ -127,11 +127,21 @@ static struct hash_algo hash_algo[] = {
 		SHA1_SUM_LEN,
 		hw_sha1,
 		CHUNKSZ_SHA1,
+#ifdef CONFIG_SHA_PROG_HW_ACCEL
+		hw_sha_init,
+		hw_sha_update,
+		hw_sha_finish,
+#endif
 	}, {
 		"sha256",
 		SHA256_SUM_LEN,
 		hw_sha256,
 		CHUNKSZ_SHA256,
+#ifdef CONFIG_SHA_PROG_HW_ACCEL
+		hw_sha_init,
+		hw_sha_update,
+		hw_sha_finish,
+#endif
 	},
 #endif
 #ifdef CONFIG_SHA1
diff --git a/common/image-fdt.c b/common/image-fdt.c
index e3f06cdd1a2..d9e47283c71 100644
--- a/common/image-fdt.c
+++ b/common/image-fdt.c
@@ -190,7 +190,7 @@ int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size)
 	*of_flat_tree = of_start;
 	*of_size = of_len;
 
-	set_working_fdt_addr(*of_flat_tree);
+	set_working_fdt_addr((ulong)*of_flat_tree);
 	return 0;
 
 error:
diff --git a/common/image-fit.c b/common/image-fit.c
index b47d11024f2..778d2a148be 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -1010,9 +1010,7 @@ int fit_image_verify(const void *fit, int image_noffset)
 	}
 
 	/* Process all hash subnodes of the component image node */
-	for (noffset = fdt_first_subnode(fit, image_noffset);
-	     noffset >= 0;
-	     noffset = fdt_next_subnode(fit, noffset)) {
+	fdt_for_each_subnode(fit, noffset, image_noffset) {
 		const char *name = fit_get_name(fit, noffset, NULL);
 
 		/*
diff --git a/common/image-sig.c b/common/image-sig.c
index 2c9f0cdf7ae..eda5e1353ab 100644
--- a/common/image-sig.c
+++ b/common/image-sig.c
@@ -212,9 +212,7 @@ static int fit_image_verify_sig(const void *fit, int image_noffset,
 	int ret;
 
 	/* Process all hash subnodes of the component image node */
-	for (noffset = fdt_first_subnode(fit, image_noffset);
-	     noffset >= 0;
-	     noffset = fdt_next_subnode(fit, noffset)) {
+	fdt_for_each_subnode(fit, noffset, image_noffset) {
 		const char *name = fit_get_name(fit, noffset, NULL);
 
 		if (!strncmp(name, FIT_SIG_NODENAME,
@@ -262,9 +260,7 @@ int fit_image_verify_required_sigs(const void *fit, int image_noffset,
 		return 0;
 	}
 
-	for (noffset = fdt_first_subnode(sig_blob, sig_node);
-	     noffset >= 0;
-	     noffset = fdt_next_subnode(sig_blob, noffset)) {
+	fdt_for_each_subnode(sig_blob, noffset, sig_node) {
 		const char *required;
 		int ret;
 
@@ -397,9 +393,7 @@ static int fit_config_verify_sig(const void *fit, int conf_noffset,
 	int ret;
 
 	/* Process all hash subnodes of the component conf node */
-	for (noffset = fdt_first_subnode(fit, conf_noffset);
-	     noffset >= 0;
-	     noffset = fdt_next_subnode(fit, noffset)) {
+	fdt_for_each_subnode(fit, noffset, conf_noffset) {
 		const char *name = fit_get_name(fit, noffset, NULL);
 
 		if (!strncmp(name, FIT_SIG_NODENAME,
@@ -444,9 +438,7 @@ int fit_config_verify_required_sigs(const void *fit, int conf_noffset,
 		return 0;
 	}
 
-	for (noffset = fdt_first_subnode(sig_blob, sig_node);
-	     noffset >= 0;
-	     noffset = fdt_next_subnode(sig_blob, noffset)) {
+	fdt_for_each_subnode(sig_blob, noffset, sig_node) {
 		const char *required;
 		int ret;
 
diff --git a/common/malloc_simple.c b/common/malloc_simple.c
index afdacff80d8..64ae0365afc 100644
--- a/common/malloc_simple.c
+++ b/common/malloc_simple.c
@@ -19,7 +19,7 @@ void *malloc_simple(size_t bytes)
 
 	new_ptr = gd->malloc_ptr + bytes;
 	if (new_ptr > gd->malloc_limit)
-		panic("Out of pre-reloc memory");
+		return NULL;
 	ptr = map_sysmem(gd->malloc_base + gd->malloc_ptr, bytes);
 	gd->malloc_ptr = ALIGN(new_ptr, sizeof(new_ptr));
 	return ptr;
diff --git a/common/spl/spl.c b/common/spl/spl.c
index daaeb507c46..ded0f304786 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -229,6 +229,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 		spl_sata_load_image();
 		break;
 #endif
+#ifdef CONFIG_SPL_BOARD_LOAD_IMAGE
+	case BOOT_DEVICE_BOARD:
+		spl_board_load_image();
+		break;
+#endif
 	default:
 #if defined(CONFIG_SPL_SERIAL_SUPPORT) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 		puts("SPL: Unsupported Boot Device!\n");
diff --git a/common/spl/spl_nor.c b/common/spl/spl_nor.c
index 2c0e8e00dd2..c2fee01ac1c 100644
--- a/common/spl/spl_nor.c
+++ b/common/spl/spl_nor.c
@@ -17,7 +17,7 @@ void spl_nor_load_image(void)
 
 #ifdef CONFIG_SPL_OS_BOOT
 	if (!spl_start_uboot()) {
-		struct image_header *header;
+		const struct image_header *header;
 
 		/*
 		 * Load Linux from its location in NOR flash to its defined