diff options
| author | Eric Nelson | 2018-01-18 07:47:32 -0700 |
|---|---|---|
| committer | Stefano Babic | 2018-02-04 12:00:58 +0100 |
| commit | 0093b3fcd83a77b18be2f8d7833a597032df6fdf (patch) | |
| tree | f73e16c17bbcd6eec82f36f87998520eceee4161 /configs/mx6memcal_defconfig | |
| parent | cc9467ef7edc1ac13b8ab7cba66f675202c0a3cb (diff) | |
mx6memcal: enable SDP support
The initial implementation of mx6memcal reset the CPU after
running the memory calibration procedure because the generic
board has no information about which boot devices are available.
Now that we have SDP support in SPL, use it to allow a full
U-Boot to be uploaded (i.e. to use "mtest").
Signed-off-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Diffstat (limited to 'configs/mx6memcal_defconfig')
| -rw-r--r-- | configs/mx6memcal_defconfig | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/configs/mx6memcal_defconfig b/configs/mx6memcal_defconfig index b27330c589d..d3720dccdb3 100644 --- a/configs/mx6memcal_defconfig +++ b/configs/mx6memcal_defconfig @@ -8,6 +8,10 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SPL,MX6QDL" CONFIG_SPL=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_GADGET_SUPPORT=y +CONFIG_SPL_USBETH_SUPPORT=y +CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_BOOTM is not set @@ -29,4 +33,10 @@ CONFIG_CMD_MEMTEST=y # CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y # CONFIG_MMC is not set +CONFIG_USB=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y CONFIG_REGEX=y |