diff options
| author | Samuel Holland | 2023-01-22 17:46:21 -0600 |
|---|---|---|
| committer | Andre Przywara | 2023-04-28 01:30:05 +0100 |
| commit | 7d5b17cca626a45b8e414820044831470ae1b300 (patch) | |
| tree | d43336e279db056a40b2778eb0037b617f58d023 /configs/q8_a23_tablet_800x480_defconfig | |
| parent | ee6a678263598b737bbc3f9a6f4932eb2739f5c4 (diff) | |
sunxi: Switch to PMIC USB power supply VBUS detection
Update boards to use the USB power supply driver, as referenced in the
device tree, instead of a virtual GPIO. This removes the need for some
DM-incompatible special cases in the GPIO driver.
The following five boards used AXP0-VBUS-DETECT in their config, but are
missing the "usb0_vbus_power-supply" property in their device tree:
- Ainol_AW1_defconfig / sun7i-a20-ainol-aw1
- Cubieboard4_defconfig / sun9i-a80-cubieboard4
- Merrii_A80_Optimus_defconfig / sun9i-a80-optimus
- Yones_Toptech_BD1078_defconfig / sun7i-a20-yones-toptech-bd1078
- Yones_Toptech_BS1078_V2_defconfig /
sun6i-a31s-yones-toptech-bs1078-v2
None of those five boards have the MUSB controller (USB OTG) enabled in
their device trees, so this change should not break anything for them.
Additionally, the following board intentionally omits the property
because VBUS is always enabled:
- Nintendo_NES_Classic_Edition_defconfig /
sun8i-r16-nintendo-nes-classic
The PHY driver already assumes VBUS is enabled when no detection method
is available, so again this will not cause any problems.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Diffstat (limited to 'configs/q8_a23_tablet_800x480_defconfig')
| -rw-r--r-- | configs/q8_a23_tablet_800x480_defconfig | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig index 3bfc5c57004..0f8c30ec853 100644 --- a/configs/q8_a23_tablet_800x480_defconfig +++ b/configs/q8_a23_tablet_800x480_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN8I_A23=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=63306 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" -CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" CONFIG_AXP_GPIO=y CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:36,ri:210,up:18,lo:22,hs:10,vs:5,sync:3,vmode:0" @@ -15,6 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_REGULATOR_AXP_USB_POWER=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_CONS_INDEX=5 CONFIG_USB_MUSB_HOST=y |