diff options
| author | Alexander Dahl | 2023-08-23 15:58:53 +0200 |
|---|---|---|
| committer | Eugen Hristev | 2023-08-29 17:39:01 +0300 |
| commit | e1ee52ca56fc90b6463d00c0ffdcb9d8464d86fc (patch) | |
| tree | bd11a7c636b9a6e41a75b5898584ede501c2d9c3 /configs/sam9x60ek_nandflash_defconfig | |
| parent | deacc651524b8f5a2b77f655223aa15d9d420b79 (diff) | |
configs: at91: sam9x60: Switch to new reset driver
Since commit 61040097a9d1 ("reset: at91: Add reset driver for basic
assert/deassert operations") the compatible "microchip,sam9x60-rstc" for
the sam9x60 reset controller in sam9x60.dtsi is not handled by
CONFIG_SYSRESET_AT91 anymore, but by CONFIG_RESET_AT91 now. This
resulted in the following error message, when trying to reset from
U-Boot shell:
U-Boot> reset
resetting ...
System reset not supported on this platform
### ERROR ### Please RESET the board ###
Fixed by enabling the new driver in the relevant defconfigs. Tested on
sam9x60-curiosity board. Defconfigs for sam9x60ek adapted in the same
way, but without testing. These should be all sam9x60 boards affected
in U-Boot here.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Diffstat (limited to 'configs/sam9x60ek_nandflash_defconfig')
| -rw-r--r-- | configs/sam9x60ek_nandflash_defconfig | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/configs/sam9x60ek_nandflash_defconfig b/configs/sam9x60ek_nandflash_defconfig index c6c46866588..569b4e747cc 100644 --- a/configs/sam9x60ek_nandflash_defconfig +++ b/configs/sam9x60ek_nandflash_defconfig @@ -14,6 +14,7 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek" CONFIG_SYS_PROMPT="U-Boot> " CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_DM_RESET=y CONFIG_DEBUG_UART_BASE=0xfffff200 CONFIG_DEBUG_UART_CLOCK=200000000 CONFIG_DEBUG_UART_BOARD_INIT=y @@ -89,6 +90,7 @@ CONFIG_PHY_MICREL=y CONFIG_MACB=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y +CONFIG_RESET_AT91=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y |