diff options
| author | Wenyou Yang | 2017-03-23 14:26:28 +0800 |
|---|---|---|
| committer | Simon Glass | 2017-05-09 12:14:15 -0600 |
| commit | 62904b7346e222208f31e330b2fa1f1deae8fbef (patch) | |
| tree | 66393ebe543f8e5f557b28077f966424df8e3e06 /configs/sama5d2_xplained_spiflash_defconfig | |
| parent | 5521d9e9e7a9360425088bc7f35b337fcf145b1d (diff) | |
configs: sama5d2_xplained: update for SPL
Enable config options to support the SPL, increase the malloc
memory size for the SPL and board_init_f stage and increase
the memory space for the SPL binary.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Diffstat (limited to 'configs/sama5d2_xplained_spiflash_defconfig')
| -rw-r--r-- | configs/sama5d2_xplained_spiflash_defconfig | 7 |
1 files changed, 6 insertions, 1 deletions
diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig index ea51293706c..70a17ed1352 100644 --- a/configs/sama5d2_xplained_spiflash_defconfig +++ b/configs/sama5d2_xplained_spiflash_defconfig @@ -4,9 +4,11 @@ CONFIG_TARGET_SAMA5D2_XPLAINED=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" @@ -29,8 +31,10 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names" CONFIG_DM=y CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_CLK_AT91=y @@ -50,12 +54,13 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_DM_ETH=y CONFIG_MACB=y CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_AT91PIO4=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_ATMEL=y CONFIG_DEBUG_UART_BASE=0xf8020000 -CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART_CLOCK=83000000 CONFIG_DEBUG_UART_BOARD_INIT=y CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y |