diff options
| author | Shengyu Qu | 2023-08-22 22:33:56 +0800 |
|---|---|---|
| committer | Leo Yu-Chi Liang | 2023-09-05 10:53:41 +0800 |
| commit | dccf4a843a5f0fb2befd31c47b70aecfd0a49ecb (patch) | |
| tree | e828383ecdb03127942bc5dec6ef22e2c177d90b /configs | |
| parent | 6164d86984cb6246680e5d94d9ec0633f2b70e98 (diff) | |
configs: starfive: Enable PCIE auto enum and NVME/USB stuff for Starfive Visionfive 2
Although PCIE driver already exists, board defconfig isn't configured to
enable PCIE enum on boot, thus USB storage device and NVME drive are not
supported by default. So modify defconfig to enable PCIE auto enum, then
start USB subsystem and scan nvme drive on boot.
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Tested-by: Milan P. Stanić <mps@arvanta.net>
Diffstat (limited to 'configs')
| -rw-r--r-- | configs/starfive_visionfive2_defconfig | 8 |
1 files changed, 7 insertions, 1 deletions
diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig index e9b63e5b847..3002c96f0ea 100644 --- a/configs/starfive_visionfive2_defconfig +++ b/configs/starfive_visionfive2_defconfig @@ -30,6 +30,7 @@ CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_SYS_PCI_64BIT=y CONFIG_PCI=y +CONFIG_PCI_INIT_R=y CONFIG_TARGET_STARFIVE_VISIONFIVE2=y CONFIG_SPL_OPENSBI_LOAD_ADDR=0x40000000 CONFIG_ARCH_RV64I=y @@ -43,7 +44,7 @@ CONFIG_SD_BOOT=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 debug rootwait earlycon=sbi" CONFIG_USE_PREBOOT=y -CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr};fdt addr ${fdtcontroladdr};" +CONFIG_PREBOOT="nvme scan; usb start; setenv fdt_addr ${fdtcontroladdr}; fdt addr ${fdtcontroladdr};" CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2.dtb" CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y @@ -124,4 +125,9 @@ CONFIG_TIMER_EARLY=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PCI=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_PCI=y +CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y |