Initial support for MPC8641 HPCN board.

1 files changed, 368 insertions, 0 deletions

diff --git a/cpu/mpc86xx/cache.S b/cpu/mpc86xx/cache.S
new file mode 100644
index 00000000000..75186b1e4b3
--- /dev/null
+++ b/cpu/mpc86xx/cache.S
@@ -0,0 +1,368 @@
+#include <config.h>
+#include <mpc86xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CACHE_LINE_SIZE
+# define CACHE_LINE_SIZE L1_CACHE_BYTES
+#endif
+
+#if CACHE_LINE_SIZE == 128
+#define LG_CACHE_LINE_SIZE 7
+#elif CACHE_LINE_SIZE == 32
+#define LG_CACHE_LINE_SIZE 5
+#elif CACHE_LINE_SIZE == 16
+#define LG_CACHE_LINE_SIZE 4
+#elif CACHE_LINE_SIZE == 8
+#define LG_CACHE_LINE_SIZE 3
+#else
+# error "Invalid cache line size!"
+#endif
+
+/*
+ * Most of this code is taken from 74xx_7xx/cache.S
+ * and then cleaned up a bit
+ */
+	
+/*
+ * Invalidate L1 instruction cache.
+ */
+_GLOBAL(invalidate_l1_instruction_cache)
+	/* use invalidate-all bit in HID0 */
+	mfspr	r3,HID0
+	ori	r3,r3,HID0_ICFI
+	mtspr	HID0,r3
+	isync
+	blr
+
+/*
+ * Invalidate L1 data cache.
+ */
+_GLOBAL(invalidate_l1_data_cache)
+	mfspr	r3,HID0
+	ori	r3,r3,HID0_DCFI
+	mtspr	HID0,r3
+	isync
+	blr
+
+/*
+ * Flush data cache.
+ */
+_GLOBAL(flush_data_cache)
+	lis	r3,0
+	lis	r5,CACHE_LINE_SIZE
+flush:
+	cmp	0,1,r3,r5
+	bge	done
+	lwz	r5,0(r3)
+	lis	r5,CACHE_LINE_SIZE
+	addi	r3,r3,0x4
+	b	flush
+done:
+	blr
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ * This is a no-op on the 601.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_icache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+	mr	r6,r3
+1:	dcbst	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	mtctr	r4
+2:	icbi	0,r6
+	addi	r6,r6,CACHE_LINE_SIZE
+	bdnz	2b
+	sync				/* additional sync needed on g4 */
+	isync
+	blr
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ *
+ * clean_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(clean_dcache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5	/* align r3 down to cache line */
+	subf	r4,r3,r4	/* r4 = offset of stop from start of cache line */
+	add	r4,r4,r5	/* r4 += cache_line_size-1 */
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE  /* r4 = number of cache lines to flush */
+	beqlr				  /* if r4 == 0 return */
+	mtctr	r4			  /* ctr = r4 */
+
+	sync
+1:	dcbst	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	blr
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_dcache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+	sync
+1:	dcbf	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbf's to get to ram */
+	blr
+
+/*
+ * Like above, but invalidate the D-cache.  This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(invalidate_dcache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+	sync
+1:	dcbi	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbi's to get to ram */
+	blr
+
+/*
+ * Flush a particular page from the data cache to RAM.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ *
+ *	void __flush_page_to_ram(void *page)
+ */
+_GLOBAL(__flush_page_to_ram)
+	rlwinm	r3,r3,0,0,19		/* Get page base address */
+	li	r4,4096/CACHE_LINE_SIZE	/* Number of lines in a page */
+	mtctr	r4
+	mr	r6,r3
+0:	dcbst	0,r3			/* Write line to ram */
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	0b
+	sync
+	mtctr	r4
+1:	icbi	0,r6
+	addi	r6,r6,CACHE_LINE_SIZE
+	bdnz	1b
+	sync
+	isync
+	blr
+
+/*
+ * Flush a particular page from the instruction cache.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ *
+ *	void __flush_icache_page(void *page)
+ */
+_GLOBAL(__flush_icache_page)
+	li	r4,4096/CACHE_LINE_SIZE	/* Number of lines in a page */
+	mtctr	r4
+1:	icbi	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync
+	isync
+	blr
+
+/*
+ * Clear a page using the dcbz instruction, which doesn't cause any
+ * memory traffic (except to write out any cache lines which get
+ * displaced).  This only works on cacheable memory.
+ */
+_GLOBAL(clear_page)
+	li	r0,4096/CACHE_LINE_SIZE
+	mtctr	r0
+1:	dcbz	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	blr
+
+/*
+ * Enable L1 Instruction cache
+ */
+_GLOBAL(icache_enable)
+	mfspr	r3, HID0
+	li	r5, HID0_ICFI|HID0_ILOCK
+	andc	r3, r3, r5
+	ori	r3, r3, HID0_ICE
+	ori	r5, r3, HID0_ICFI
+	mtspr	HID0, r5
+	mtspr	HID0, r3
+	isync
+	blr
+
+/*
+ * Disable L1 Instruction cache
+ */
+_GLOBAL(icache_disable)
+	mfspr	r3, HID0
+	li	r5, 0
+	ori	r5, r5, HID0_ICE
+	andc	r3, r3, r5
+	mtspr	HID0, r3
+	isync
+	blr
+
+/*
+ * Is instruction cache enabled?
+ */
+_GLOBAL(icache_status)
+	mfspr	r3, HID0
+	andi.	r3, r3, HID0_ICE
+	blr
+
+
+_GLOBAL(l1dcache_enable)
+	mfspr	r3, HID0
+	li	r5, HID0_DCFI|HID0_DLOCK
+	andc	r3, r3, r5
+	mtspr	HID0, r3		/* no invalidate, unlock */
+	ori	r3, r3, HID0_DCE
+	ori	r5, r3, HID0_DCFI
+	mtspr	HID0, r5		/* enable + invalidate */
+	mtspr	HID0, r3		/* enable */
+	sync
+	blr
+
+/*
+ * Enable data cache(s) - L1 and optionally L2
+ * Calls l2cache_enable. LR saved in r5
+ */
+_GLOBAL(dcache_enable)
+	mfspr	r3, HID0
+	li	r5, HID0_DCFI|HID0_DLOCK
+	andc	r3, r3, r5
+	mtspr	HID0, r3		/* no invalidate, unlock */
+	ori	r3, r3, HID0_DCE
+	ori	r5, r3, HID0_DCFI
+	mtspr	HID0, r5		/* enable + invalidate */
+	mtspr	HID0, r3		/* enable */
+	sync
+#ifdef CFG_L2
+	mflr	r5
+	bl	l2cache_enable		/* uses r3 and r4 */
+	sync
+	mtlr	r5
+#endif
+	blr
+
+
+/*
+ * Disable data cache(s) - L1 and optionally L2
+ * Calls flush_data_cache and l2cache_disable_no_flush.
+ * LR saved in r4
+ */
+_GLOBAL(dcache_disable)
+	mflr	r4			/* save link register */
+	bl	flush_data_cache	/* uses r3 and r5 */
+	sync
+	mfspr	r3, HID0
+	li	r5, HID0_DCFI|HID0_DLOCK
+	andc	r3, r3, r5
+	mtspr	HID0, r3		/* no invalidate, unlock */
+	li	r5, HID0_DCE|HID0_DCFI
+	andc	r3, r3, r5		/* no enable, no invalidate */
+	mtspr	HID0, r3
+	sync
+#ifdef CFG_L2
+	bl	l2cache_disable_no_flush /* uses r3 */
+#endif
+	mtlr	r4			/* restore link register */
+	blr
+
+/*
+ * Is data cache enabled?
+ */
+_GLOBAL(dcache_status)
+	mfspr	r3, HID0
+	andi.	r3, r3, HID0_DCE
+	blr
+
+/*
+ * Invalidate L2 cache using L2I and polling L2IP
+ */
+_GLOBAL(l2cache_invalidate)
+	sync
+	oris	r3, r3, L2CR_L2I@h
+	sync
+	mtspr	l2cr, r3
+	sync
+invl2:
+	mfspr	r3, l2cr
+	andi.	r3, r3, L2CR_L2IP
+	bne	invl2
+	/* turn off the global invalidate bit */
+	mfspr	r3, l2cr
+	rlwinm	r3, r3, 0, 11, 9
+	sync
+	mtspr	l2cr, r3
+	sync
+	blr
+
+/*
+ * Enable L2 cache
+ * Calls l2cache_invalidate. LR is saved in r4
+ */
+_GLOBAL(l2cache_enable)
+	mflr	r4			/* save link register */
+	bl	l2cache_invalidate	/* uses r3 */
+	sync
+	lis	r3, L2_ENABLE@h
+	ori	r3, r3, L2_ENABLE@l
+	mtspr	l2cr, r3
+	isync
+	mtlr	r4			/* restore link register */
+	blr
+
+/*
+ * Disable L2 cache
+ * Calls flush_data_cache. LR is saved in r4
+ */
+_GLOBAL(l2cache_disable)
+	mflr	r4			/* save link register */
+	bl	flush_data_cache	/* uses r3 and r5 */
+	sync
+	mtlr	r4			/* restore link register */
+l2cache_disable_no_flush:		/* provide way to disable L2 w/o flushing */
+	lis	r3, L2_INIT@h
+	ori	r3, r3, L2_INIT@l
+	mtspr	l2cr, r3
+	isync
+	blr