ppc4xx: Consolidate PPC4xx UIC defines

This 2nd patch now removes all UIC mask bit definition. They should be
generated from the vectors by using the UIC_MASK() macro from now on.
This way only the vectors need to get defined for new PPC's.

Also only the really used interrupt vectors are now defined. This makes
definitions for new PPC versions easier and less error prone.

Another part of this patch is that the 4xx emac driver got a little
cleanup, since now the usage of the interrupts is clearer.

Signed-off-by: Stefan Roese <sr@denx.de>

3 files changed, 157 insertions, 328 deletions

diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 47d8abc1775..01712b056e0 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -121,11 +121,62 @@
  * Defines for MAL/EMAC interrupt conditions as reported in the UIC (Universal
  * Interrupt Controller).
  *-----------------------------------------------------------------------------*/
-#define MAL_UIC_ERR ( UIC_MAL_SERR | UIC_MAL_TXDE  | UIC_MAL_RXDE)
-#define MAL_UIC_DEF  (UIC_MAL_RXEOB | MAL_UIC_ERR)
-#define EMAC_UIC_DEF UIC_ENET
-#define EMAC_UIC_DEF1 UIC_ENET1
-#define SEL_UIC_DEF(p) (p ? UIC_ENET1 : UIC_ENET )
+#define ETH_IRQ_NUM(dev)	(VECNUM_ETH0 + ((dev) * VECNUM_ETH1_OFFS))
+
+#if defined(CONFIG_HAS_ETH3)
+#if !defined(CONFIG_440GX)
+#define UIC_ETHx	(UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)) || \
+			 UIC_MASK(ETH_IRQ_NUM(2)) || UIC_MASK(ETH_IRQ_NUM(3)))
+#else
+/* Unfortunately 440GX spreads EMAC interrupts on multiple UIC's */
+#define UIC_ETHx	(UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)))
+#define UIC_ETHxB	(UIC_MASK(ETH_IRQ_NUM(2)) || UIC_MASK(ETH_IRQ_NUM(3)))
+#endif /* !defined(CONFIG_440GX) */
+#elif defined(CONFIG_HAS_ETH2)
+#define UIC_ETHx	(UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)) || \
+			 UIC_MASK(ETH_IRQ_NUM(2)))
+#elif defined(CONFIG_HAS_ETH1)
+#define UIC_ETHx	(UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)))
+#else
+#define UIC_ETHx	UIC_MASK(ETH_IRQ_NUM(0))
+#endif
+
+/*
+ * Define a default version for UIC_ETHxB for non 440GX so that we can
+ * use common code for all 4xx variants
+ */
+#if !defined(UIC_ETHxB)
+#define UIC_ETHxB	0
+#endif
+
+#define UIC_MAL_SERR	UIC_MASK(VECNUM_MAL_SERR)
+#define UIC_MAL_TXDE	UIC_MASK(VECNUM_MAL_TXDE)
+#define UIC_MAL_RXDE	UIC_MASK(VECNUM_MAL_RXDE)
+#define UIC_MAL_TXEOB	UIC_MASK(VECNUM_MAL_TXEOB)
+#define UIC_MAL_RXEOB	UIC_MASK(VECNUM_MAL_RXEOB)
+
+#define MAL_UIC_ERR	(UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)
+#define MAL_UIC_DEF	(UIC_MAL_RXEOB | MAL_UIC_ERR)
+
+/*
+ * We have 3 different interrupt types:
+ * - MAL interrupts indicating successful transfer
+ * - MAL error interrupts indicating MAL related errors
+ * - EMAC interrupts indicating EMAC related errors
+ *
+ * All those interrupts can be on different UIC's, but since
+ * now at least all interrupts from one type are on the same
+ * UIC. Only exception is 440GX where the EMAC interrupts are
+ * spread over two UIC's!
+ */
+#define UIC_BASE_MAL	(UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_TXEOB) * 0x10))
+#define UIC_BASE_MAL_ERR (UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_SERR) * 0x10))
+#define UIC_BASE_EMAC	(UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10))
+#if defined(CONFIG_440GX)
+#define UIC_BASE_EMAC_B	(UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(2)) * 0x10))
+#else
+#define UIC_BASE_EMAC_B	(UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10))
+#endif
 
 #undef INFO_4XX_ENET
 
@@ -165,9 +216,6 @@
 /*-----------------------------------------------------------------------------+
  * Global variables. TX and RX descriptors and buffers.
  *-----------------------------------------------------------------------------*/
-/* IER globals */
-static uint32_t mal_ier;
-
 #if !defined(CONFIG_NET_MULTI)
 struct eth_device *emac0_dev = NULL;
 #endif
@@ -199,12 +247,6 @@ struct eth_device *emac0_dev = NULL;
 #define CONFIG_EMAC_NR_START	0
 #endif
 
-#if defined(CONFIG_405EX) || defined(CONFIG_440EPX)
-#define ETH_IRQ_NUM(dev)	(VECNUM_ETH0 + ((dev)))
-#else
-#define ETH_IRQ_NUM(dev)	(VECNUM_ETH0 + ((dev) * 2))
-#endif
-
 #define MAL_RX_DESC_SIZE	2048
 #define MAL_TX_DESC_SIZE	2048
 #define MAL_ALLOC_SIZE		(MAL_TX_DESC_SIZE + MAL_RX_DESC_SIZE)
@@ -1434,59 +1476,17 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
 	}
 }
 
-
-#if defined (CONFIG_440) || defined(CONFIG_405EX)
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-/*
- * Hack: On 440SP all enet irq sources are located on UIC1
- * Needs some cleanup. --sr
- */
-#define UIC0MSR		uic1msr
-#define UIC0SR		uic1sr
-#define UIC1MSR		uic1msr
-#define UIC1SR		uic1sr
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-/*
- * Hack: On 460EX/GT all enet irq sources are located on UIC2
- * Needs some cleanup. --ag
- */
-#define UIC0MSR		uic2msr
-#define UIC0SR		uic2sr
-#define UIC1MSR		uic2msr
-#define UIC1SR		uic2sr
-#else
-#define UIC0MSR		uic0msr
-#define UIC0SR		uic0sr
-#define UIC1MSR		uic1msr
-#define UIC1SR		uic1sr
-#endif
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_405EX)
-#define UICMSR_ETHX	uic0msr
-#define UICSR_ETHX	uic0sr
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UICMSR_ETHX	uic2msr
-#define UICSR_ETHX	uic2sr
-#else
-#define UICMSR_ETHX	uic1msr
-#define UICSR_ETHX	uic1sr
-#endif
-
 int enetInt (struct eth_device *dev)
 {
 	int serviced;
 	int rc = -1;		/* default to not us */
-	unsigned long mal_isr;
-	unsigned long emac_isr = 0;
-	unsigned long mal_rx_eob;
-	unsigned long my_uic0msr, my_uic1msr;
-	unsigned long my_uicmsr_ethx;
-
-#if defined(CONFIG_440GX)
-	unsigned long my_uic2msr;
-#endif
+	u32 mal_isr;
+	u32 emac_isr = 0;
+	u32 mal_eob;
+	u32 uic_mal;
+	u32 uic_mal_err;
+	u32 uic_emac;
+	u32 uic_emac_b;
 	EMAC_4XX_HW_PST hw_p;
 
 	/*
@@ -1505,256 +1505,79 @@ int enetInt (struct eth_device *dev)
 	do {
 		serviced = 0;
 
-		my_uic0msr = mfdcr (UIC0MSR);
-		my_uic1msr = mfdcr (UIC1MSR);
-#if defined(CONFIG_440GX)
-		my_uic2msr = mfdcr (uic2msr);
-#endif
-		my_uicmsr_ethx = mfdcr (UICMSR_ETHX);
+		uic_mal = mfdcr(UIC_BASE_MAL + UIC_MSR);
+		uic_mal_err = mfdcr(UIC_BASE_MAL_ERR + UIC_MSR);
+		uic_emac = mfdcr(UIC_BASE_EMAC + UIC_MSR);
+		uic_emac_b = mfdcr(UIC_BASE_EMAC_B + UIC_MSR);
 
-		if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
-		    && !(my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))
-		    && !(my_uicmsr_ethx & (UIC_ETH0 | UIC_ETH1))) {
-			/* not for us */
-			return (rc);
-		}
-#if defined (CONFIG_440GX)
-		if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
-		    && !(my_uic2msr & (UIC_ETH2 | UIC_ETH3))) {
+		if (!(uic_mal & (UIC_MAL_RXEOB | UIC_MAL_TXEOB))
+		    && !(uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE))
+		    && !(uic_emac & UIC_ETHx) && !(uic_emac_b & UIC_ETHxB)) {
 			/* not for us */
 			return (rc);
 		}
-#endif
+
 		/* get and clear controller status interrupts */
-		/* look at Mal and EMAC interrupts */
-		if ((my_uic0msr & (UIC_MRE | UIC_MTE))
-		    || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
-			/* we have a MAL interrupt */
-			mal_isr = mfdcr (malesr);
-			/* look for mal error */
-			if (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) {
-				mal_err (dev, mal_isr, my_uic1msr, MAL_UIC_DEF, MAL_UIC_ERR);
-				serviced = 1;
-				rc = 0;
-			}
-		}
+		/* look at MAL and EMAC error interrupts */
+		if (uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)) {
+			/* we have a MAL error interrupt */
+			mal_isr = mfdcr(malesr);
+			mal_err(dev, mal_isr, uic_mal_err,
+				 MAL_UIC_DEF, MAL_UIC_ERR);
 
-		/* port by port dispatch of emac interrupts */
-		if (hw_p->devnum == 0) {
-			if (UIC_ETH0 & my_uicmsr_ethx) {	/* look for EMAC errors */
-				emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
-				if ((hw_p->emac_ier & emac_isr) != 0) {
-					emac_err (dev, emac_isr);
-					serviced = 1;
-					rc = 0;
-				}
-			}
-			if ((hw_p->emac_ier & emac_isr)
-			    || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
-				mtdcr (UIC0SR, UIC_MRE | UIC_MTE);	/* Clear */
-				mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE);	/* Clear */
-				mtdcr (UICSR_ETHX, UIC_ETH0); /* Clear */
-				return (rc);	/* we had errors so get out */
-			}
-		}
+			/* clear MAL error interrupt status bits */
+			mtdcr(UIC_BASE_MAL_ERR + UIC_SR,
+			      UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE);
 
-#if !defined(CONFIG_440SP)
-		if (hw_p->devnum == 1) {
-			if (UIC_ETH1 & my_uicmsr_ethx) {	/* look for EMAC errors */
-				emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
-				if ((hw_p->emac_ier & emac_isr) != 0) {
-					emac_err (dev, emac_isr);
-					serviced = 1;
-					rc = 0;
-				}
-			}
-			if ((hw_p->emac_ier & emac_isr)
-			    || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
-				mtdcr (UIC0SR, UIC_MRE | UIC_MTE);	/* Clear */
-				mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
-				mtdcr (UICSR_ETHX, UIC_ETH1); /* Clear */
-				return (rc);	/* we had errors so get out */
-			}
-		}
-#if defined (CONFIG_440GX)
-		if (hw_p->devnum == 2) {
-			if (UIC_ETH2 & my_uic2msr) {	/* look for EMAC errors */
-				emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
-				if ((hw_p->emac_ier & emac_isr) != 0) {
-					emac_err (dev, emac_isr);
-					serviced = 1;
-					rc = 0;
-				}
-			}
-			if ((hw_p->emac_ier & emac_isr)
-			    || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
-				mtdcr (UIC0SR, UIC_MRE | UIC_MTE);	/* Clear */
-				mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE);	/* Clear */
-				mtdcr (uic2sr, UIC_ETH2);
-				return (rc);	/* we had errors so get out */
-			}
+			return -1;
 		}
 
-		if (hw_p->devnum == 3) {
-			if (UIC_ETH3 & my_uic2msr) {	/* look for EMAC errors */
-				emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
-				if ((hw_p->emac_ier & emac_isr) != 0) {
-					emac_err (dev, emac_isr);
-					serviced = 1;
-					rc = 0;
-				}
-			}
-			if ((hw_p->emac_ier & emac_isr)
-			    || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
-				mtdcr (UIC0SR, UIC_MRE | UIC_MTE);	/* Clear */
-				mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE);	/* Clear */
-				mtdcr (uic2sr, UIC_ETH3);
-				return (rc);	/* we had errors so get out */
-			}
-		}
-#endif /* CONFIG_440GX */
-#endif /* !CONFIG_440SP */
+		/* look for EMAC errors */
+		if ((uic_emac & UIC_ETHx) || (uic_emac_b & UIC_ETHxB)) {
+			emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
+			emac_err(dev, emac_isr);
 
-		/* handle MAX TX EOB interrupt from a tx */
-		if (my_uic0msr & UIC_MTE) {
-			mal_rx_eob = mfdcr (maltxeobisr);
-			mtdcr (maltxeobisr, mal_rx_eob);
-			mtdcr (UIC0SR, UIC_MTE);
-		}
-		/* handle MAL RX EOB  interupt from a receive */
-		/* check for EOB on valid channels	      */
-		if (my_uic0msr & UIC_MRE) {
-			mal_rx_eob = mfdcr (malrxeobisr);
-			if ((mal_rx_eob &
-			     (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL)))
-			    != 0) { /* call emac routine for channel x */
-				/* clear EOB
-				   mtdcr(malrxeobisr, mal_rx_eob); */
-				enet_rcv (dev, emac_isr);
-				/* indicate that we serviced an interrupt */
-				serviced = 1;
-				rc = 0;
-			}
-		}
+			/* clear EMAC error interrupt status bits */
+			mtdcr(UIC_BASE_EMAC + UIC_SR, UIC_ETHx);
+			mtdcr(UIC_BASE_EMAC_B + UIC_SR, UIC_ETHxB);
 
-		mtdcr (UIC0SR, UIC_MRE);	/* Clear */
-		mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE);	/* Clear */
-		switch (hw_p->devnum) {
-		case 0:
-			mtdcr (UICSR_ETHX, UIC_ETH0);
-			break;
-		case 1:
-			mtdcr (UICSR_ETHX, UIC_ETH1);
-			break;
-#if defined (CONFIG_440GX)
-		case 2:
-			mtdcr (uic2sr, UIC_ETH2);
-			break;
-		case 3:
-			mtdcr (uic2sr, UIC_ETH3);
-			break;
-#endif /* CONFIG_440GX */
-		default:
-			break;
+			return -1;
 		}
-	} while (serviced);
-
-	return (rc);
-}
-
-#else /* CONFIG_440 */
-
-int enetInt (struct eth_device *dev)
-{
-	int serviced;
-	int rc = -1;		/* default to not us */
-	unsigned long mal_isr;
-	unsigned long emac_isr = 0;
-	unsigned long mal_rx_eob;
-	unsigned long my_uicmsr;
-
-	EMAC_4XX_HW_PST hw_p;
-
-	/*
-	 * Because the mal is generic, we need to get the current
-	 * eth device
-	 */
-#if defined(CONFIG_NET_MULTI)
-	dev = eth_get_dev();
-#else
-	dev = emac0_dev;
-#endif
 
-	hw_p = dev->priv;
-
-	/* enter loop that stays in interrupt code until nothing to service */
-	do {
-		serviced = 0;
-
-		my_uicmsr = mfdcr (uicmsr);
-
-		if ((my_uicmsr & (MAL_UIC_DEF | EMAC_UIC_DEF)) == 0) {	/* not for us */
-			return (rc);
-		}
-		/* get and clear controller status interrupts */
-		/* look at Mal and EMAC interrupts */
-		if ((MAL_UIC_DEF & my_uicmsr) != 0) {	/* we have a MAL interrupt */
-			mal_isr = mfdcr (malesr);
-			/* look for mal error */
-			if ((my_uicmsr & MAL_UIC_ERR) != 0) {
-				mal_err (dev, mal_isr, my_uicmsr, MAL_UIC_DEF, MAL_UIC_ERR);
-				serviced = 1;
-				rc = 0;
-			}
+		/* handle MAX TX EOB interrupt from a tx */
+		if (uic_mal & UIC_MAL_TXEOB) {
+			/* clear MAL interrupt status bits */
+			mal_eob = mfdcr(maltxeobisr);
+			mtdcr(maltxeobisr, mal_eob);
+			mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_TXEOB);
+
+			/* indicate that we serviced an interrupt */
+			serviced = 1;
+			rc = 0;
 		}
 
-		/* port by port dispatch of emac interrupts */
+		/* handle MAL RX EOB interupt from a receive */
+		/* check for EOB on valid channels	     */
+		if (uic_mal & UIC_MAL_RXEOB) {
+			mal_eob = mfdcr(malrxeobisr);
+			if (mal_eob &
+			    (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL))) {
+				/* push packet to upper layer */
+				enet_rcv(dev, emac_isr);
 
-		if ((SEL_UIC_DEF(hw_p->devnum) & my_uicmsr) != 0) {	/* look for EMAC errors */
-			emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
-			if ((hw_p->emac_ier & emac_isr) != 0) {
-				emac_err (dev, emac_isr);
-				serviced = 1;
-				rc = 0;
-			}
-		}
-		if (((hw_p->emac_ier & emac_isr) != 0) || ((MAL_UIC_ERR & my_uicmsr) != 0)) {
-			mtdcr (uicsr, MAL_UIC_DEF | SEL_UIC_DEF(hw_p->devnum)); /* Clear */
-			return (rc);		/* we had errors so get out */
-		}
+				/* clear MAL interrupt status bits */
+				mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_RXEOB);
 
-		/* handle MAX TX EOB interrupt from a tx */
-		if (my_uicmsr & UIC_MAL_TXEOB) {
-			mal_rx_eob = mfdcr (maltxeobisr);
-			mtdcr (maltxeobisr, mal_rx_eob);
-			mtdcr (uicsr, UIC_MAL_TXEOB);
-		}
-		/* handle MAL RX EOB  interupt from a receive */
-		/* check for EOB on valid channels	      */
-		if (my_uicmsr & UIC_MAL_RXEOB)
-		{
-			mal_rx_eob = mfdcr (malrxeobisr);
-			if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel x */
-				/* clear EOB
-				 mtdcr(malrxeobisr, mal_rx_eob); */
-				enet_rcv (dev, emac_isr);
 				/* indicate that we serviced an interrupt */
 				serviced = 1;
 				rc = 0;
 			}
 		}
-		mtdcr (uicsr, MAL_UIC_DEF|EMAC_UIC_DEF|EMAC_UIC_DEF1);	/* Clear */
-#if defined(CONFIG_405EZ)
-		mtsdr (sdricintstat, SDR_ICRX_STAT | SDR_ICTX0_STAT | SDR_ICTX1_STAT);
-#endif	/* defined(CONFIG_405EZ) */
-	}
-	while (serviced);
+	} while (serviced);
 
 	return (rc);
 }
 
-#endif /* CONFIG_440 */
-
 /*-----------------------------------------------------------------------------+
  *  MAL Error Routine
  *-----------------------------------------------------------------------------*/
@@ -1940,6 +1763,7 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 	EMAC_4XX_HW_PST hw = NULL;
 	u8 ethaddr[4 + CONFIG_EMAC_NR_START][6];
 	u32 hw_addr[4];
+	u32 mal_ier;
 
 #if defined(CONFIG_440GX)
 	unsigned long pfc1;
@@ -2077,19 +1901,19 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 			mtdcr (malier, mal_ier);
 
 			/* install MAL interrupt handler */
-			irq_install_handler (VECNUM_MS,
+			irq_install_handler (VECNUM_MAL_SERR,
 					     (interrupt_handler_t *) enetInt,
 					     dev);
-			irq_install_handler (VECNUM_MTE,
+			irq_install_handler (VECNUM_MAL_TXEOB,
 					     (interrupt_handler_t *) enetInt,
 					     dev);
-			irq_install_handler (VECNUM_MRE,
+			irq_install_handler (VECNUM_MAL_RXEOB,
 					     (interrupt_handler_t *) enetInt,
 					     dev);
-			irq_install_handler (VECNUM_TXDE,
+			irq_install_handler (VECNUM_MAL_TXDE,
 					     (interrupt_handler_t *) enetInt,
 					     dev);
-			irq_install_handler (VECNUM_RXDE,
+			irq_install_handler (VECNUM_MAL_RXDE,
 					     (interrupt_handler_t *) enetInt,
 					     dev);
 			virgin = 1;
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index eb9cb1d397b..6dbd6d28190 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -35,25 +35,27 @@
 #include <ppc_asm.tmpl>
 #include <commproc.h>
 
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Define the number of UIC's
- */
-#if defined(CONFIG_440SPE) || \
-    defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UIC_MAX		4
-#elif defined(CONFIG_440GX) || \
-    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_405EX)
-#define UIC_MAX		3
-#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \
-    defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define UIC_MAX		2
+#if (UIC_MAX > 3)
+#define UICB0_ALL	(UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
+			 UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI) | \
+			 UIC_MASK(VECNUM_UIC3CI) | UIC_MASK(VECNUM_UIC3NCI))
+#elif (UIC_MAX > 2)
+#if defined(CONFIG_440GX)
+#define UICB0_ALL	(UIC_MASK(VECNUM_UIC0CI) | UIC_MASK(VECNUM_UIC0NCI) | \
+			 UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
+			 UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI))
+#else
+#define UICB0_ALL	(UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
+			 UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI))
+#endif
+#elif (UIC_MAX > 1)
+#define UICB0_ALL	(UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI))
 #else
-#define UIC_MAX		1
+#define UICB0_ALL	0
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * CPM interrupt vector functions.
  */
@@ -158,18 +160,23 @@ int interrupt_init_cpu (unsigned *decrementer_count)
 #if !defined(CONFIG_440GX)
 #if (UIC_MAX > 1)
 	/* Install the UIC1 handlers */
-	irq_install_handler(VECNUM_UIC1NC, uic_cascade_interrupt, 0);
-	irq_install_handler(VECNUM_UIC1C, uic_cascade_interrupt, 0);
+	irq_install_handler(VECNUM_UIC1NCI, uic_cascade_interrupt, 0);
+	irq_install_handler(VECNUM_UIC1CI, uic_cascade_interrupt, 0);
 #endif
 #if (UIC_MAX > 2)
-	irq_install_handler(VECNUM_UIC2NC, uic_cascade_interrupt, 0);
-	irq_install_handler(VECNUM_UIC2C, uic_cascade_interrupt, 0);
+	irq_install_handler(VECNUM_UIC2NCI, uic_cascade_interrupt, 0);
+	irq_install_handler(VECNUM_UIC2CI, uic_cascade_interrupt, 0);
 #endif
 #if (UIC_MAX > 3)
-	irq_install_handler(VECNUM_UIC3NC, uic_cascade_interrupt, 0);
-	irq_install_handler(VECNUM_UIC3C, uic_cascade_interrupt, 0);
+	irq_install_handler(VECNUM_UIC3NCI, uic_cascade_interrupt, 0);
+	irq_install_handler(VECNUM_UIC3CI, uic_cascade_interrupt, 0);
 #endif
 #else /* !defined(CONFIG_440GX) */
+	/*
+	 * ToDo: Remove this 440GX special handling:
+	 * Move SDR0_MFR setup to cpu.c and use common code with UICB0
+	 * on 440GX. 2008-06-26, sr
+	 */
 	/* Take the GX out of compatibility mode
 	 * Travis Sawyer, 9 Mar 2004
 	 * NOTE: 440gx user manual inconsistency here
@@ -182,7 +189,7 @@ int interrupt_init_cpu (unsigned *decrementer_count)
 
 	/* Enable UIC interrupts via UIC Base Enable Register */
 	mtdcr(uicb0sr, UICB0_ALL);
-	mtdcr(uicb0er, 0x54000000);
+	mtdcr(uicb0er, UICB0_ALL);
 	/* None are critical */
 	mtdcr(uicb0cr, 0);
 #endif /* !defined(CONFIG_440GX) */
@@ -216,8 +223,7 @@ static void uic_interrupt(u32 uic_base, int vec_base)
 				(*irq_vecs[vec].handler)(irq_vecs[vec].arg);
 			} else {
 				set_dcr(uic_base + UIC_ER,
-					get_dcr(uic_base + UIC_ER) &
-					~(0x80000000 >> (vec & 0x1f)));
+					get_dcr(uic_base + UIC_ER) & ~UIC_MASK(vec));
 				printf("Masking bogus interrupt vector %d"
 				       " (UIC_BASE=0x%x)\n", vec, uic_base);
 			}
@@ -226,7 +232,7 @@ static void uic_interrupt(u32 uic_base, int vec_base)
 			 * After servicing the interrupt, we have to remove the
 			 * status indicator
 			 */
-			set_dcr(uic_base + UIC_SR, (0x80000000 >> (vec & 0x1f)));
+			set_dcr(uic_base + UIC_SR, UIC_MASK(vec));
 		}
 
 		/*
@@ -244,7 +250,6 @@ static void uic_cascade_interrupt(void *para)
 }
 #endif
 
-#if defined(CONFIG_440)
 #if defined(CONFIG_440GX)
 /* 440GX uses base uic register */
 #define UIC_BMSR	uicb0msr
@@ -253,10 +258,6 @@ static void uic_cascade_interrupt(void *para)
 #define UIC_BMSR	uic0msr
 #define UIC_BSR		uic0sr
 #endif
-#else /* CONFIG_440 */
-#define UIC_BMSR	uicmsr
-#define UIC_BSR		uicsr
-#endif /* CONFIG_440 */
 
 /*
  * Handle external interrupts
@@ -271,17 +272,20 @@ void external_interrupt(struct pt_regs *regs)
 	uic_msr = mfdcr(UIC_BMSR);
 
 #if (UIC_MAX > 1)
-	if ((UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr))
+	if ((UIC_MASK(VECNUM_UIC1CI) & uic_msr) ||
+	    (UIC_MASK(VECNUM_UIC1NCI) & uic_msr))
 		uic_interrupt(UIC1_DCR_BASE, 32);
 #endif
 
 #if (UIC_MAX > 2)
-	if ((UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr))
+	if ((UIC_MASK(VECNUM_UIC2CI) & uic_msr) ||
+	    (UIC_MASK(VECNUM_UIC2NCI) & uic_msr))
 		uic_interrupt(UIC2_DCR_BASE, 64);
 #endif
 
 #if (UIC_MAX > 3)
-	if ((UICB0_UIC3CI & uic_msr) || (UICB0_UIC3NCI & uic_msr))
+	if ((UIC_MASK(VECNUM_UIC3CI) & uic_msr) ||
+	    (UIC_MASK(VECNUM_UIC3NCI) & uic_msr))
 		uic_interrupt(UIC3_DCR_BASE, 96);
 #endif
 
@@ -290,7 +294,8 @@ void external_interrupt(struct pt_regs *regs)
 	if (uic_msr & ~(UICB0_ALL))
 		uic_interrupt(UIC0_DCR_BASE, 0);
 #else
-	if ((UICB0_UIC0CI & uic_msr) || (UICB0_UIC0NCI & uic_msr))
+	if ((UIC_MASK(VECNUM_UIC0CI) & uic_msr) ||
+	    (UIC_MASK(VECNUM_UIC0NCI) & uic_msr))
 		uic_interrupt(UIC0_DCR_BASE, 0);
 #endif
 #else /* CONFIG_440 */
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
index 27e6a4056c9..faf7f0878ff 100644
--- a/cpu/ppc4xx/usbdev.c
+++ b/cpu/ppc4xx/usbdev.c
@@ -197,7 +197,7 @@ void usb_dev_init()
 	/*enable interrupts */
 	*(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
 
-	irq_install_handler(VECNUM_HSB2D, (interrupt_handler_t *) usbInt,
+	irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
 			    NULL);
 }
 #else