86xx: Convert sbc8641d to use libfdt.

This is the proper fix for a missing closing brace in the function
ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
The ft_cpu_setup() function in mpc8641hpcn.c should have been
removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
but was missed.  Only, the sbc8641d was nominally still using it.
It all got ripped out, and the funcality that was in ft_board_setup()
was refactored to remove the CPU portions into the new file
cpu/mpc86xx/fdt.c instead.  Make sbc8641d use this now.

Based loosely on an original patch from joe.hamman@embeddedspecialties.com

Signed-off-by: Jon Loeliger <jdl@freescale.com>

3 files changed, 47 insertions, 66 deletions

diff --git a/cpu/mpc86xx/Makefile b/cpu/mpc86xx/Makefile
index 6d9300e22e7..537f62a3238 100644
--- a/cpu/mpc86xx/Makefile
+++ b/cpu/mpc86xx/Makefile
@@ -28,13 +28,20 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(CPU).a
 
-START	= start.o #resetvec.o
+START	= start.o
 SOBJS	= cache.o
-COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
-	  spd_sdram.o
 
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+COBJS-y	+= traps.o
+COBJS-y	+= cpu.o
+COBJS-y	+= cpu_init.o
+COBJS-y	+= speed.o
+COBJS-y	+= interrupts.o
+COBJS-y	+= spd_sdram.o
+
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+
+SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
 START	:= $(addprefix $(obj),$(START))
 
 all:	$(obj).depend $(START) $(LIB)
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
index e1b3c52dcdc..bf4e651aaf2 100644
--- a/cpu/mpc86xx/cpu.c
+++ b/cpu/mpc86xx/cpu.c
@@ -29,9 +29,6 @@
 #include <mpc86xx.h>
 #include <asm/fsl_law.h>
 
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
 
 int
 checkcpu(void)
@@ -269,64 +266,6 @@ dma_xfer(void *dest, uint count, void *src)
 #endif	/* CONFIG_DDR_ECC */
 
 
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_cpu_setup(void *blob, bd_t *bd)
-{
-	u32 *p;
-	ulong clock;
-	int len;
-
-	clock = bd->bi_busfreq;
-	p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
-	if (p != NULL)
-		*p = cpu_to_be32(clock);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
-	if (p != NULL)
-		*p = cpu_to_be32(clock);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len);
-	if (p != NULL)
-		*p = cpu_to_be32(clock);
-
-#if defined(CONFIG_TSEC1)
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
-	if (p != NULL)
-		memcpy(p, bd->bi_enetaddr, 6);
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enetaddr, 6);
-#endif
-
-#if defined(CONFIG_TSEC2)
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
-	if (p != NULL)
-		memcpy(p, bd->bi_enet1addr, 6);
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
-	if (p != NULL)
-		memcpy(p, bd->bi_enet1addr, 6);
-#endif
-
-#if defined(CONFIG_TSEC3)
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
-	if (p != NULL)
-		memcpy(p, bd->bi_enet2addr, 6);
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len);
-	if (p != NULL)
-		memcpy(p, bd->bi_enet2addr, 6);
-#endif
-
-#if defined(CONFIG_TSEC4)
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
-	if (p != NULL)
-		memcpy(p, bd->bi_enet3addr, 6);
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len);
-	if (p != NULL)
-		memcpy(p, bd->bi_enet3addr, 6);
-#endif
-#endif /* CONFIG_OF_FLAT_TREE */
-
 /*
  * Print out the state of various machine registers.
  * Currently prints out LAWs and BR0/OR0
diff --git a/cpu/mpc86xx/fdt.c b/cpu/mpc86xx/fdt.c
new file mode 100644
index 00000000000..379306ea4f3
--- /dev/null
+++ b/cpu/mpc86xx/fdt.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+			     "timebase-frequency", bd->bi_busfreq / 4, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+			     "bus-frequency", bd->bi_busfreq, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+			     "clock-frequency", bd->bi_intfreq, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+			     "bus-frequency", bd->bi_busfreq, 1);
+
+	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) \
+    || defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+	fdt_fixup_ethernet(blob, bd);
+#endif
+
+#ifdef CFG_NS16550
+	do_fixup_by_compat_u32(blob, "ns16550",
+			       "clock-frequency", bd->bi_busfreq, 1);
+#endif
+}