Add secondary CPUs processor frequency for e500 core

This patch updates e500 freqProcessor to array based on CONFIG_NUM_CPUS,
and prints each CPU's frequency separately. It also fixes up each CPU's
frequency in "clock-frequency" of fdt blob.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

3 files changed, 24 insertions, 8 deletions

diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 15ba7f1c5ed..a34e2515e80 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -90,6 +90,7 @@ int checkcpu (void)
 #else
 	u32 ddr_ratio = 0;
 #endif
+	int i;
 
 	svr = get_svr();
 	ver = SVR_SOC_VER(svr);
@@ -141,8 +142,10 @@ int checkcpu (void)
 
 	get_sys_info(&sysinfo);
 
-	puts("Clock Configuration:\n");
-	printf("       CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor));
+	puts("Clock Configuration:\n       ");
+	for (i = 0; i < CONFIG_NUM_CPUS; i++)
+		printf("CPU%d:%-4s MHz, ",
+				i,strmhz(buf1, sysinfo.freqProcessor[i]));
 	printf("CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
 
 	switch (ddr_ratio) {
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
index 69fab995270..1fae47c2dcd 100644
--- a/cpu/mpc85xx/fdt.c
+++ b/cpu/mpc85xx/fdt.c
@@ -213,6 +213,10 @@ void fdt_add_enet_stashing(void *fdt)
 
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
+	int off;
+	int val;
+	sys_info_t sysinfo;
+
 	/* delete crypto node if not on an E-processor */
 	if (!IS_E_PROCESSOR(get_svr()))
 		fdt_fixup_crypto_node(blob, 0);
@@ -228,8 +232,15 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 		"timebase-frequency", bd->bi_busfreq / 8, 1);
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 		"bus-frequency", bd->bi_busfreq, 1);
-	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
-		"clock-frequency", bd->bi_intfreq, 1);
+	get_sys_info(&sysinfo);
+	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+	while (off != -FDT_ERR_NOTFOUND) {
+		u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+		val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]);
+		fdt_setprop(blob, off, "clock-frequency", &val, 4);
+		off = fdt_node_offset_by_prop_value(blob, off, "device_type",
+							"cpu", 4);
+	}
 	do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
 		"bus-frequency", bd->bi_busfreq, 1);
 
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index 0d55228b641..b0f47e042e9 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -39,17 +39,19 @@ void get_sys_info (sys_info_t * sysInfo)
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint plat_ratio,e500_ratio,half_freqSystemBus;
 	uint lcrr_div;
+	int i;
 
 	plat_ratio = (gur->porpllsr) & 0x0000003e;
 	plat_ratio >>= 1;
 	sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
-	e500_ratio = (gur->porpllsr) & 0x003f0000;
-	e500_ratio >>= 16;
 
 	/* Divide before multiply to avoid integer
 	 * overflow for processor speeds above 2GHz */
 	half_freqSystemBus = sysInfo->freqSystemBus/2;
-	sysInfo->freqProcessor = e500_ratio*half_freqSystemBus;
+	for (i = 0; i < CONFIG_NUM_CPUS; i++) {
+		e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f;
+		sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus;
+	}
 
 	/* Note: freqDDRBus is the MCLK frequency, not the data rate. */
 	sysInfo->freqDDRBus = sysInfo->freqSystemBus;
@@ -105,7 +107,7 @@ int get_clocks (void)
 	dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
 #endif
 	get_sys_info (&sys_info);
-	gd->cpu_clk = sys_info.freqProcessor;
+	gd->cpu_clk = sys_info.freqProcessor[0];
 	gd->bus_clk = sys_info.freqSystemBus;
 	gd->mem_clk = sys_info.freqDDRBus;
 	gd->lbc_clk = sys_info.freqLocalBus;