Merge branch 'master' of git://www.denx.de/git/u-boot-coldfire

1 files changed, 279 insertions, 0 deletions

diff --git a/doc/README.m5475evb b/doc/README.m5475evb
new file mode 100644
index 00000000000..cec4fd0434c
--- /dev/null
+++ b/doc/README.m5475evb
@@ -0,0 +1,279 @@
+Freescale MCF5475EVB ColdFire Development Board
+================================================
+
+TsiChung Liew(Tsi-Chung.Liew@freescale.com)
+Created Jan 08, 2008
+===========================================
+
+
+Changed files:
+==============
+
+- board/freescale/m547xevb/m547xevb.c	Dram setup, IDE pre init, and PCI init
+- board/freescale/m547xevb/mii.c	MII init
+- board/freescale/m547xevb/Makefile	Makefile
+- board/freescale/m547xevb/config.mk	config make
+- board/freescale/m547xevb/u-boot.lds	Linker description
+
+- cpu/mcf547x_8x/cpu.c			cpu specific code
+- cpu/mcf547x_8x/cpu_init.c		Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
+- cpu/mcf547x_8x/interrupts.c		cpu specific interrupt support
+- cpu/mcf547x_8x/slicetimer.c		Timer support
+- cpu/mcf547x_8x/speed.c		system, pci, flexbus, and cpu clock
+- cpu/mcf547x_8x/Makefile		Makefile
+- cpu/mcf547x_8x/config.mk		config make
+- cpu/mcf547x_8x/start.S		start up assembly code
+
+- doc/README.m5475evb			This readme file
+
+- drivers/dma/MCD_dmaApi.c		DMA API functions
+- drivers/dma/MCD_tasks.c		DMA Tasks
+- drivers/dma/MCD_tasksInit.c		DMA Tasks Init
+- drivers/net/fsl_mcdmafec.c		ColdFire common DMA FEC driver
+- drivers/serial/mcfuart.c		ColdFire common UART driver
+
+- include/MCD_dma.h			DMA header file
+- include/MCD_progCheck.h		DMA header file
+- include/MCD_tasksInit.h		DMA header file
+- include/asm-m68k/bitops.h		Bit operation function export
+- include/asm-m68k/byteorder.h		Byte order functions
+- include/asm-m68k/errno.h		Error Number definition
+- include/asm-m68k/fec.h		FEC structure and definition
+- include/asm-m68k/fsl_i2c.h		I2C structure and definition
+- include/asm-m68k/fsl_mcddmafec.h	DMA FEC structure and definition
+- include/asm-m68k/global_data.h	Global data structure
+- include/asm-m68k/immap.h		ColdFire specific header file and driver macros
+- include/asm-m68k/immap_547x_8x.h	mcf547x_8x specific header file
+- include/asm-m68k/io.h			io functions
+- include/asm-m68k/m547x_8x.h		mcf547x_8x specific header file
+- include/asm-m68k/posix_types.h	Posix
+- include/asm-m68k/processor.h		header file
+- include/asm-m68k/ptrace.h		Exception structure
+- include/asm-m68k/rtc.h		Realtime clock header file
+- include/asm-m68k/string.h		String function export
+- include/asm-m68k/timer.h		Timer structure and definition
+- include/asm-m68k/types.h		Data types definition
+- include/asm-m68k/uart.h		Uart structure and definition
+- include/asm-m68k/u-boot.h		u-boot structure
+
+- include/configs/M5475EVB.h		Board specific configuration file
+
+- lib_m68k/board.c			board init function
+- lib_m68k/cache.c
+- lib_m68k/interrupts			Coldfire common interrupt functions
+- lib_m68k/m68k_linux.c
+- lib_m68k/traps.c			Exception init code
+
+1 MCF547x specific Options/Settings
+====================================
+1.1 pre-loader is no longer suppoer in thie coldfire family
+
+1.2 Configuration settings for M5475EVB Development Board
+CONFIG_MCF547x_8x	-- define for all MCF547x_8x CPUs
+CONFIG_M547x		-- define for all Freescale MCF547x CPUs
+CONFIG_M5475		-- define for M5475EVB board
+
+CONFIG_MCFUART		-- define to use common CF Uart driver
+CFG_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_BAUDRATE		-- define UART baudrate
+
+CONFIG_FSLDMAFEC	-- define to use common dma FEC driver
+CONFIG_NET_MULTI	-- define to use multi FEC in u-boot
+CONFIG_MII		-- enable to use MII driver
+CONFIG_CF_DOMII		-- enable to use MII feature in cmd_mii.c
+CFG_DISCOVER_PHY	-- enable PHY discovery
+CFG_RX_ETH_BUFFER	-- Set FEC Receive buffer
+CFG_FAULT_ECHO_LINK_DOWN--
+CFG_FEC0_PINMUX		-- Set FEC0 Pin configuration
+CFG_FEC1_PINMUX		-- Set FEC1 Pin configuration
+CFG_FEC0_MIIBASE	-- Set FEC0 MII base register
+CFG_FEC1_MIIBASE	-- Set FEC0 MII base register
+MCFFEC_TOUT_LOOP	-- set FEC timeout loop
+CONFIG_HAS_ETH1		-- define to enable second FEC in u-boot
+
+CONFIG_CMD_USB		-- enable USB commands
+CONFIG_USB_OHCI_NEW	-- enable USB OHCI driver
+CONFIG_USB_STORAGE	-- enable USB Storage device
+CONFIG_DOS_PARTITION	-- enable DOS read/write
+
+CONFIG_SLTTMR		-- define to use SLT timer
+
+CONFIG_FSL_I2C		-- define to use FSL common I2C driver
+CONFIG_HARD_I2C		-- define for I2C hardware support
+CONFIG_SOFT_I2C		-- define for I2C bit-banged
+CFG_I2C_SPEED		-- define for I2C speed
+CFG_I2C_SLAVE		-- define for I2C slave address
+CFG_I2C_OFFSET		-- define for I2C base address offset
+CFG_IMMR		-- define for MBAR offset
+
+CONFIG_PCI              -- define for PCI support
+CONFIG_PCI_PNP          -- define for Plug n play support
+CONFIG_SKIPPCI_HOSTBRIDGE	-- SKIP PCI Host bridge
+CFG_PCI_MEM_BUS		-- PCI memory logical offset
+CFG_PCI_MEM_PHYS	-- PCI memory physical offset
+CFG_PCI_MEM_SIZE	-- PCI memory size
+CFG_PCI_IO_BUS		-- PCI IO logical offset
+CFG_PCI_IO_PHYS		-- PCI IO physical offset
+CFG_PCI_IO_SIZE		-- PCI IO size
+CFG_PCI_CFG_BUS		-- PCI Configuration logical offset
+CFG_PCI_CFG_PHYS	-- PCI Configuration physical offset
+CFG_PCI_CFG_SIZE	-- PCI Configuration size
+
+CFG_MBAR		-- define MBAR offset
+
+CONFIG_MONITOR_IS_IN_RAM -- Not support
+
+CFG_INIT_RAM_ADDR	-- defines the base address of the MCF547x internal SRAM
+
+CFG_CSn_BASE	-- defines the Chip Select Base register
+CFG_CSn_MASK	-- defines the Chip Select Mask register
+CFG_CSn_CTRL	-- defines the Chip Select Control register
+
+CFG_SDRAM_BASE	-- defines the DRAM Base
+
+2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
+===========================================
+2.1. System memory map:
+	Flash:		0xFF800000-0xFFFFFFFF (8MB)
+	DDR:		0x00000000-0x3FFFFFFF (1024MB)
+	SRAM:		0xF2000000-0xF2000FFF (4KB)
+	PCI:		0x70000000-0x8FFFFFFF (512MB)
+	IP:		0xF0000000-0xFFFFFFFF (256MB)
+
+3. COMPILATION
+==============
+3.1	To create U-Boot the gcc-4.x compiler set (ColdFire ELF or uclinux
+        version) from codesourcery.com was used. Download it from:
+	http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
+
+3.2 Compilation
+   export CROSS_COMPILE=cross-compile-prefix
+   cd u-boot-1.x.x
+   make distclean
+   make M5475AFE_config, or	- boot 2MB, RAM 64MB
+   make M5475BFE_config, or	- boot 2MB, code 16MB, RAM 64MB
+   make M5475CFE_config, or	- boot 2MB, code 16MB, Video, USB, RAM 64MB
+   make M5475DFE_config, or	- boot 2MB, USB, RAM 64MB
+   make M5475EFE_config, or	- boot 2MB, Video, USB, RAM 64MB
+   make M5475FFE_config, or	- boot 2MB, code 32MB, Video, USB, RAM 128MB
+   make M5475GFE_config, or	- boot 2MB, RAM 64MB
+   make
+
+5. SCREEN DUMP
+==============
+5.1
+
+U-Boot 1.3.1 (Jan  8 2008 - 12:47:44)
+
+CPU:   Freescale MCF5475
+       CPU CLK 266 Mhz BUS CLK 133 Mhz
+Board: Freescale FireEngine 5475 EVB
+I2C:   ready
+DRAM:  64 MB
+FLASH: 18 MB
+In:    serial
+Out:   serial
+Err:   serial
+Net:   FEC0, FEC1
+-> pri
+bootdelay=1
+baudrate=115200
+ethaddr=00:e0:0c:bc:e5:60
+eth1addr=00:e0:0c:bc:e5:61
+ipaddr=192.162.1.2
+serverip=192.162.1.1
+gatewayip=192.162.1.1
+netmask=255.255.255.0
+hostname=M547xEVB
+netdev=eth0
+loadaddr=10000
+u-boot=u-boot.bin
+load=tftp ${loadaddr) ${u-boot}
+upd=run load; run prog
+prog=prot off bank 1;era ff800000 ff82ffff;cp.b ${loadaddr} ff800000 ${filesize};save
+stdin=serial
+stdout=serial
+stderr=serial
+ethact=FEC0
+mem=65024k
+
+Environment size: 433/8188 bytes
+-> bdin
+memstart    = 0x00000000
+memsize     = 0x04000000
+flashstart  = 0xFF800000
+flashsize   = 0x01200000
+flashoffset = 0x00000000
+sramstart   = 0xF2000000
+sramsize    = 0x00001000
+mbar        = 0xF0000000
+busfreq     = 133.333 MHz
+pcifreq     =      0 MHz
+ethaddr     = 00:E0:0C:BC:E5:60
+eth1addr    = 00:E0:0C:BC:E5:61
+ip_addr     = 192.162.1.2
+baudrate    = 115200 bps
+-> ?
+?       - alias for 'help'
+autoscr - run script from memory
+base    - print or set address offset
+bdinfo  - print Board Info structure
+boot    - boot default, i.e., run 'bootcmd'
+bootd   - boot default, i.e., run 'bootcmd'
+bootelf - Boot from an ELF image in memory
+bootm   - boot application image from memory
+bootp	- boot image via network using BootP/TFTP protocol
+bootvx  - Boot vxWorks from an ELF image
+cmp     - memory compare
+coninfo - print console devices and information
+cp      - memory copy
+crc32   - checksum calculation
+dcache  - enable or disable data cache
+echo    - echo args to console
+erase   - erase FLASH memory
+flinfo  - print FLASH memory information
+go      - start application at address 'addr'
+help    - print online help
+icache  - enable or disable instruction cache
+icrc32  - checksum calculation
+iloop   - infinite loop on address range
+imd     - i2c memory display
+iminfo  - print header information for application image
+imls    - list all images found in flash
+imm     - i2c memory modify (auto-incrementing)
+imw     - memory write (fill)
+inm     - memory modify (constant address)
+iprobe  - probe to discover valid I2C chip addresses
+itest	- return true/false on integer compare
+loadb   - load binary file over serial line (kermit mode)
+loads   - load S-Record file over serial line
+loady   - load binary file over serial line (ymodem mode)
+loop    - infinite loop on address range
+md      - memory display
+mii     - MII utility commands
+mm      - memory modify (auto-incrementing)
+mtest   - simple RAM test
+mw      - memory write (fill)
+nfs	- boot image via network using NFS protocol
+nm      - memory modify (constant address)
+pci     - list and access PCI Configuration Space
+ping	- send ICMP ECHO_REQUEST to network host
+printenv- print environment variables
+protect - enable or disable FLASH write protection
+rarpboot- boot image via network using RARP/TFTP protocol
+reset   - Perform RESET of the CPU
+run     - run commands in an environment variable
+saveenv - save environment variables to persistent storage
+setenv  - set environment variables
+sleep   - delay execution for some time
+tftpboot- boot image via network using TFTP protocol
+usb     - USB sub-system
+usbboot - boot from USB device
+version - print monitor version
+-> usb start
+(Re)start USB...
+USB:   OHCI pci controller (1131, 1561) found @(0:17:0)
+OHCI regs address 0x80000000
+scanning bus for devices... 2 USB Device(s) found
+       scanning bus for storage devices... 1 Storage Device(s) found
+->