Merge tag 'efi-2021-10-rc3' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2021-10-rc3

Documentation:

* Rename Freescale to NXP
* Document structures used for the UEFI TCG2 protocol

UEFI:

* Device paths must use EfiBootServicesData

1 files changed, 56 insertions, 0 deletions

diff --git a/doc/board/nxp/imx8mq_evk.rst b/doc/board/nxp/imx8mq_evk.rst
new file mode 100644
index 00000000000..c269fdebe30
--- /dev/null
+++ b/doc/board/nxp/imx8mq_evk.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx8mq_evk
+==========
+
+U-Boot for the NXP i.MX8MQ EVK board
+
+Quick Start
+-----------
+
+- Build the ARM Trusted firmware binary
+- Get ddr and hdmi fimware
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+Note: srctree is U-Boot source directory
+Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
+branch: imx_5.4.47_2.2.0
+
+.. code-block:: bash
+
+   $ make PLAT=imx8mq bl31
+   $ cp build/imx8mq/release/bl31.bin $(builddir)
+
+Get the ddr and hdmi firmware
+-----------------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
+   $ chmod +x firmware-imx-8.9.bin
+   $ ./firmware-imx-8.9.bin
+   $ cp firmware-imx-8.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
+   $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+   $ export CROSS_COMPILE=aarch64-poky-linux-
+   $ make imx8mq_evk_defconfig
+   $ make flash.bin
+
+Burn the flash.bin to MicroSD card offset 33KB:
+
+.. code-block:: bash
+
+   $sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc
+
+Boot
+----
+Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.