diff options
| author | Patrick Delaunay | 2021-11-25 11:54:53 +0100 |
|---|---|---|
| committer | Patrice Chotard | 2021-11-30 16:43:28 +0100 |
| commit | c7c06fa776b3a553df922259908fad12cfa0e1e8 (patch) | |
| tree | f94ce46957d293818880dec4baff2f938dbc560c /doc/board/st | |
| parent | b2ac9645e6989f06382909f7230c1b1fd5b4df2c (diff) | |
board: stm32mp1: add support of nor1 device in dfu command
Add support of mtd backend for nor1 when this device is present on the
board, on STM32MP157C-EV1 for example, as the support of several MTD
spi-nor instance are now supported with commit b7f060565e31 ("mtd:
spi-nor: allow registering multiple MTDs when DM is enabled").
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Diffstat (limited to 'doc/board/st')
| -rw-r--r-- | doc/board/st/stm32mp1.rst | 18 |
1 files changed, 10 insertions, 8 deletions
diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst index 42bb94148d9..0c5d3a90f04 100644 --- a/doc/board/st/stm32mp1.rst +++ b/doc/board/st/stm32mp1.rst @@ -645,16 +645,18 @@ On EV1 board, booting from SD card, without OP-TEE_:: dev: eMMC alt: 15 name: mmc1_rootfs layout: RAW_ADDR dev: eMMC alt: 16 name: mmc1_userfs layout: RAW_ADDR dev: MTD alt: 17 name: nor0 layout: RAW_ADDR - dev: MTD alt: 18 name: nand0 layout: RAW_ADDR - dev: VIRT alt: 19 name: OTP layout: RAW_ADDR - dev: VIRT alt: 20 name: PMIC layout: RAW_ADDR + dev: MTD alt: 18 name: nor1 layout: RAW_ADDR + dev: MTD alt: 19 name: nand0 layout: RAW_ADDR + dev: VIRT alt: 20 name: OTP layout: RAW_ADDR + dev: VIRT alt: 21 name: PMIC layout: RAW_ADDR All the supported device are exported for dfu-util tool:: $> dfu-util -l - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="PMIC", serial="002700333338511934383330" - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="OTP", serial="002700333338511934383330" - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nand0", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=21, name="PMIC", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="OTP", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="nand0", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nor1", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=17, name="nor0", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=16, name="mmc1_userfs", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=15, name="mmc1_rootfs", serial="002700333338511934383330" @@ -705,12 +707,12 @@ You can update the boot device: When the board is booting for nor0 or nand0, only the MTD partition on the boot devices are available, for example: -- NOR (nor0 = alt 20) & NAND (nand0 = alt 26) :: +- NOR (nor0 = alt 20, nor1 = alt 26) & NAND (nand0 = alt 27) : $> dfu-util -d 0483:5720 -a 21 -D tf-a-stm32mp157c-ev1.stm32 $> dfu-util -d 0483:5720 -a 22 -D tf-a-stm32mp157c-ev1.stm32 $> dfu-util -d 0483:5720 -a 23 -D fip-stm32mp157c-ev1.bin - $> dfu-util -d 0483:5720 -a 27 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi + $> dfu-util -d 0483:5720 -a 28 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi - NAND (nand0 = alt 21):: |