diff options
| author | Christian Hewitt | 2023-03-20 11:45:59 +0000 |
|---|---|---|
| committer | Neil Armstrong | 2023-04-17 11:06:08 +0200 |
| commit | 16fa2c4238eaddbd4b6548a4875cac4fbcda3f7c (patch) | |
| tree | 1b23c31765dec199e985a5dcf6c51c515889d421 /doc | |
| parent | da8d658093957492bfa30c515122a1dad8031af1 (diff) | |
doc: boards: amlogic: update documentation for Radxa Zero
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20230320114609.930145-24-christianshewitt@gmail.com
[narmstrong: fixed doc build]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/board/amlogic/radxa-zero.rst | 46 |
1 files changed, 25 insertions, 21 deletions
diff --git a/doc/board/amlogic/radxa-zero.rst b/doc/board/amlogic/radxa-zero.rst index f5611f52ecb..14ce3cfd492 100644 --- a/doc/board/amlogic/radxa-zero.rst +++ b/doc/board/amlogic/radxa-zero.rst @@ -1,14 +1,13 @@ .. SPDX-License-Identifier: GPL-2.0+ -U-Boot for Radxa Zero -===================== +U-Boot for Radxa Zero (S905Y2) +============================== -Radxa Zero is a small form factor SBC based on the Amlogic S905Y2 -chipset that ships in a number of RAM/eMMC configurations: +Radxa Zero is a small form factor SBC based on the Amlogic S905Y2 chipset that ships in +a number of RAM/eMMC configurations: -Boards with 512MB/1GB LPDDR4 RAM have no eMMC storage and BCM43436 -wireless (2.4GHz b/g/n) while 2GB/4GB boards have 8/16/32/64/128GB -eMMC storage and BCM4345 wireless (2.4/5GHz a/b/g/n/ac). +512MB/1GB LPDDR4 RAM boards have no eMMC and BCM43436 wireless (2.4GHz b/g/n) while the +2GB/4GB boards have 8/16/32/64/128GB eMMC and BCM4345 wireless (2.4/5GHz a/b/g/n/ac). - Amlogic S905Y2 quad-core Cortex-A53 - Mali G31-MP2 GPU @@ -18,11 +17,9 @@ eMMC storage and BCM4345 wireless (2.4/5GHz a/b/g/n/ac). - 1x micro SD Card slot - 40 Pin GPIO header -Schematics are available on the manufacturer website: +Schematics are available on the manufacturer website: https://dl.radxa.com/zero/docs/hw -https://dl.radxa.com/zero/docs/hw/RADAX_ZERO_V13_SCH_20210309.pdf - -U-Boot compilation +U-Boot Compilation ------------------ .. code-block:: bash @@ -31,14 +28,21 @@ U-Boot compilation $ make radxa-zero_defconfig $ make -Image creation --------------- +U-Boot Signing with Pre-Built FIP repo +-------------------------------------- + +.. code-block:: bash + + $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1 + $ cd amlogic-boot-fip + $ mkdir my-output-dir + $ ./build-fip.sh radxa-zero /path/to/u-boot/u-boot.bin my-output-dir -For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `radxa-zero` +U-Boot Manual Signing +--------------------- -Amlogic does not provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -git trees published by the board vendor: +Amlogic does not provide sources for the firmware and tools needed to create a bootloader +image so it is necessary to obtain binaries from sources published by the board vendor: .. code-block:: bash @@ -61,16 +65,16 @@ git trees published by the board vendor: $ cd ../fip/radxa-zero $ make -This will generate: +This will generate the signed U-Boot binaries: .. code-block:: bash $ u-boot.bin u-boot.bin.sd.bin u-boot.bin.usb.bl2 u-boot.bin.usb.tpl -Then write the image to SD with: +Then write U-Boot to SD or eMMC with: .. code-block:: bash - $ DEV=/dev/your_sd_device + $ DEV=/dev/boot_device $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440 |