doc: Add documentation for the Arm VExpress64 board configs

Create a new documentation section for Arm Ltd boards with a sub-page
for the VExpress64 boards (FVP-A and Juno).

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>

3 files changed, 61 insertions, 0 deletions

diff --git a/doc/board/armltd/index.rst b/doc/board/armltd/index.rst
new file mode 100644
index 00000000000..c20d8a0a26b
--- /dev/null
+++ b/doc/board/armltd/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Arm Ltd
+=============
+
+.. toctree::
+   :maxdepth: 2
+
+   vexpress64.rst
diff --git a/doc/board/armltd/vexpress64.rst b/doc/board/armltd/vexpress64.rst
new file mode 100644
index 00000000000..d87b1c38f5b
--- /dev/null
+++ b/doc/board/armltd/vexpress64.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Arm Versatile Express
+=====================
+
+The vexpress_* board configuration supports the following platforms:
+
+ * FVP_Base_RevC-2xAEMvA
+ * Juno development board
+
+Fixed Virtual Platforms
+-----------------------
+
+The Fixed Virtual Platforms (FVP) are complete simulations of an Arm system,
+including processor, memory and peripherals. They are set out in a "programmer's
+view", which gives a comprehensive model on which to build and test software.
+
+The supported FVPs are available free of charge and can be downloaded from the
+Arm developer site [1]_ (user registration might be required).
+
+Supported features:
+
+ * GICv3
+ * Generic timer
+ * PL011 UART
+
+The default configuration assumes that U-Boot is bootstrapped using a suitable
+bootloader, such as Trusted Firmware-A [4]_. The u-boot binary can be passed
+into the TF-A build: ``make PLAT=<platform> all fip BL33=u-boot.bin``
+
+The FVPs can be debugged using Arm Development Studio [2]_.
+
+Juno
+----
+
+Juno is an Arm development board with the following features:
+
+ * Arm Cortex-A72/A57 and Arm Cortex-A53 in a "big.LITTLE" configuration
+ * A PCIe Gen2.0 bus with 4 lanes
+ * 8GB of DRAM
+ * GICv2
+
+More details can be found in the board documentation [3]_.
+
+References
+----------
+
+.. [1] https://developer.arm.com/tools-and-software/simulation-models/fixed-virtual-platforms
+.. [2] https://developer.arm.com/tools-and-software/embedded/arm-development-studio
+.. [3] https://developer.arm.com/tools-and-software/development-boards/juno-development-board
+.. [4] https://trustedfirmware-a.readthedocs.io/
\ No newline at end of file
diff --git a/doc/board/index.rst b/doc/board/index.rst
index 0a02fec485b..5607e1f9463 100644
--- a/doc/board/index.rst
+++ b/doc/board/index.rst
@@ -12,6 +12,7 @@ Board-specific doc
    allwinner/index
    amlogic/index
    apple/index
+   armltd/index
    atmel/index
    congatec/index
    coreboot/index