Drop PCMCIA

This is no-longer used in U-Boot and has not been converted to driver
model. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

2 files changed, 0 insertions, 76 deletions

diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia
deleted file mode 100644
index 0a363b2ada2..00000000000
--- a/doc/README.marubun-pcmcia
+++ /dev/null
@@ -1,65 +0,0 @@
-
-U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
-	Last update 21/11/2007 by Nobuhiro Iwamatsu
-
-========================================================================================
-
-0. What's this?
-    This driver supports MARUBUN MR-SHPC-01.
-	url: http://www.marubun.co.jp/product/semicon/devices/qgc18e0000002n2z.html
-	(Sorry Japanese only.)
-
-    This chip is used with SuperH well, and adopted by the
-    reference board.
-	ex. * MS7750SE01
-		* MS7722SE01
-		* other
-
-    This chip doesn't support CardBus.
-
-1. base source code
-    The code is based on sources from the Linux kernel
-	( arch/sh/kernel/cf-enabler.c ).
-
-2. How to use
-    The options you have to specify in the config file are (with the
-    value for my board as an example):
-
-    * CONFIG_MARUBUN_PCCARD
-	If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD.
-	ex.	#define CONFIG_MARUBUN_PCCARD
-
-    * CONFIG_PCMCIA_SLOT_A
-	Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
-	ex.	#define CONFIG_PCMCIA_SLOT_A    1
-
-    * CONFIG_SYS_MARUBUN_MRSHPC
-	This is MR-SHPC-01 PCMCIA controller base address.
-	You should do the setting matched to your environment.
-	ex.  #define CONFIG_SYS_MARUBUN_MRSHPC 0xb03fffe0
-	     ( for MS7722SE01 environment )
-
-    * CONFIG_SYS_MARUBUN_MW1
-	This is MR-SHPC-01 memory window base address.
-	You should do the setting matched to your environment.
-	ex. #define CONFIG_SYS_MARUBUN_MW1 0xb0400000
-	     ( for MS7722SE01 environment )
-
-    * CONFIG_SYS_MARUBUN_MW1
-	This is MR-SHPC-01 attribute window base address.
-	You should do the setting matched to your environment.
-	ex. #define CONFIG_SYS_MARUBUN_MW2 0xb0500000
-	     ( for MS7722SE01 environment )
-
-    * CONFIG_SYS_MARUBUN_MW1
-	This is MR-SHPC-01 I/O window base address.
-	You should do the setting matched to your environment.
-	ex. #define CONFIG_SYS_MARUBUN_IO  0xb0600000
-	     ( for MS7722SE01 environment )
-
-3. Other
-    * Check Compact Flash only.
-    * Maybe, NE2000 compatible NIC is sure to move.
-
-Copyright (c) 2007
-	Nobuhiro Iwamatsu <iwamatsu@nigaur.org>
diff --git a/doc/README.ne2000 b/doc/README.ne2000
index d5ae9a9eb14..0f6a2e04ff1 100644
--- a/doc/README.ne2000
+++ b/doc/README.ne2000
@@ -21,17 +21,6 @@ value for my board as an example):
 
 - Address where the board is mapped
 
-#define CONFIG_DRIVER_NE2000_CCR (0x28000000+0x3f8)
-
-- Address of the CCR (card configuration register). It could be found
-by enabling DEBUG in cmd_pcmcia.c. If this is not defined nothing is
-done as far as PCMCIA support is concerned.
-
-#define CONFIG_DRIVER_NE2000_VAL (0x20)
-
-- The value to be written in the CCR. It selects among different I/O
-spaces that could be used by the card.
-
 
 Enjoy!