clk: qcom: add support for power domains uclass

Now sub-drivers for particular SoCs can register them as power domain
drivers. This is needed for upcoming SM8150 support, because it needs
to power up the Ethernet module.

Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
[caleb: make ARCH_SNAPDRAGON select POWER_DOMAIN]
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>

3 files changed, 126 insertions, 14 deletions

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 0df0d1881a4..8dae635ac2c 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -2,7 +2,7 @@ if ARCH_SNAPDRAGON || ARCH_IPQ40XX
 
 config CLK_QCOM
 	bool
-	depends on CLK && DM_RESET
+	depends on CLK && DM_RESET && POWER_DOMAIN
 	def_bool n
 
 menu "Qualcomm clock drivers"
diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c
index 729d190c54b..7a5938a06a3 100644
--- a/drivers/clk/qcom/clock-qcom.c
+++ b/drivers/clk/qcom/clock-qcom.c
@@ -22,7 +22,9 @@
 #include <linux/bug.h>
 #include <linux/delay.h>
 #include <linux/bitops.h>
+#include <linux/iopoll.h>
 #include <reset-uclass.h>
+#include <power-domain-uclass.h>
 
 #include "clock-qcom.h"
 
@@ -30,6 +32,13 @@
 #define CBCR_BRANCH_ENABLE_BIT  BIT(0)
 #define CBCR_BRANCH_OFF_BIT     BIT(31)
 
+#define GDSC_SW_COLLAPSE_MASK		BIT(0)
+#define GDSC_POWER_DOWN_COMPLETE	BIT(15)
+#define GDSC_POWER_UP_COMPLETE		BIT(16)
+#define GDSC_PWR_ON_MASK		BIT(31)
+#define CFG_GDSCR_OFFSET		0x4
+#define GDSC_STATUS_POLL_TIMEOUT_US	1500
+
 /* Enable clock controlled by CBC soft macro */
 void clk_enable_cbc(phys_addr_t cbcr)
 {
@@ -223,7 +232,7 @@ U_BOOT_DRIVER(qcom_clk) = {
 int qcom_cc_bind(struct udevice *parent)
 {
 	struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(parent);
-	struct udevice *clkdev, *rstdev;
+	struct udevice *clkdev = NULL, *rstdev = NULL, *pwrdev;
 	struct driver *drv;
 	int ret;
 
@@ -238,20 +247,41 @@ int qcom_cc_bind(struct udevice *parent)
 	if (ret)
 		return ret;
 
-	/* Bail out early if resets are not specified for this platform */
-	if (!data->resets)
-		return ret;
+	if (data->resets) {
+		/* Get a handle to the common reset handler */
+		drv = lists_driver_lookup_name("qcom_reset");
+		if (!drv) {
+			ret = -ENOENT;
+			goto unbind_clkdev;
+		}
+
+		/* Register the reset controller */
+		ret = device_bind_with_driver_data(parent, drv, "qcom_reset", (ulong)data,
+						   dev_ofnode(parent), &rstdev);
+		if (ret)
+			goto unbind_clkdev;
+	}
 
-	/* Get a handle to the common reset handler */
-	drv = lists_driver_lookup_name("qcom_reset");
-	if (!drv)
-		return -ENOENT;
+	if (data->power_domains) {
+		/* Get a handle to the common power domain handler */
+		drv = lists_driver_lookup_name("qcom_power");
+		if (!drv) {
+			ret = -ENOENT;
+			goto unbind_rstdev;
+		}
+		/* Register the power domain controller */
+		ret = device_bind_with_driver_data(parent, drv, "qcom_power", (ulong)data,
+						   dev_ofnode(parent), &pwrdev);
+		if (ret)
+			goto unbind_rstdev;
+	}
 
-	/* Register the reset controller */
-	ret = device_bind_with_driver_data(parent, drv, "qcom_reset", (ulong)data,
-					   dev_ofnode(parent), &rstdev);
-	if (ret)
-		device_unbind(clkdev);
+	return 0;
+
+unbind_rstdev:
+	device_unbind(rstdev);
+unbind_clkdev:
+	device_unbind(clkdev);
 
 	return ret;
 }
@@ -306,3 +336,79 @@ U_BOOT_DRIVER(qcom_reset) = {
 	.ops = &qcom_reset_ops,
 	.probe = qcom_reset_probe,
 };
+
+static int qcom_power_set(struct power_domain *pwr, bool on)
+{
+	struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(pwr->dev);
+	void __iomem *base = dev_get_priv(pwr->dev);
+	const struct qcom_power_map *map;
+	u32 value;
+	int ret;
+
+	if (pwr->id >= data->num_power_domains)
+		return -ENODEV;
+
+	map = &data->power_domains[pwr->id];
+
+	if (!map->reg)
+		return -ENODEV;
+
+	value = readl(base + map->reg);
+
+	if (on)
+		value &= ~GDSC_SW_COLLAPSE_MASK;
+	else
+		value |= GDSC_SW_COLLAPSE_MASK;
+
+	writel(value, base + map->reg);
+
+	if (on)
+		ret = readl_poll_timeout(base + map->reg + CFG_GDSCR_OFFSET,
+					 value,
+					 (value & GDSC_POWER_UP_COMPLETE) ||
+					 (value & GDSC_PWR_ON_MASK),
+					 GDSC_STATUS_POLL_TIMEOUT_US);
+
+	else
+		ret = readl_poll_timeout(base + map->reg + CFG_GDSCR_OFFSET,
+					 value,
+					 (value & GDSC_POWER_DOWN_COMPLETE) ||
+					 !(value & GDSC_PWR_ON_MASK),
+					 GDSC_STATUS_POLL_TIMEOUT_US);
+
+
+	if (ret == -ETIMEDOUT)
+		printf("WARNING: GDSC %lu is stuck during power on/off\n",
+		       pwr->id);
+	return ret;
+}
+
+static int qcom_power_on(struct power_domain *pwr)
+{
+	return qcom_power_set(pwr, true);
+}
+
+static int qcom_power_off(struct power_domain *pwr)
+{
+	return qcom_power_set(pwr, false);
+}
+
+static const struct power_domain_ops qcom_power_ops = {
+	.on = qcom_power_on,
+	.off = qcom_power_off,
+};
+
+static int qcom_power_probe(struct udevice *dev)
+{
+	/* Set our priv pointer to the base address */
+	dev_set_priv(dev, (void *)dev_read_addr(dev));
+
+	return 0;
+}
+
+U_BOOT_DRIVER(qcom_power) = {
+	.name = "qcom_power",
+	.id = UCLASS_POWER_DOMAIN,
+	.ops = &qcom_power_ops,
+	.probe = qcom_power_probe,
+};
diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h
index 01088c19015..12a1eaec2b2 100644
--- a/drivers/clk/qcom/clock-qcom.h
+++ b/drivers/clk/qcom/clock-qcom.h
@@ -59,9 +59,15 @@ struct qcom_reset_map {
 	u8 bit;
 };
 
+struct qcom_power_map {
+	unsigned int reg;
+};
+
 struct clk;
 
 struct msm_clk_data {
+	const struct qcom_power_map	*power_domains;
+	unsigned long			num_power_domains;
 	const struct qcom_reset_map	*resets;
 	unsigned long			num_resets;
 	const struct gate_clk		*clks;