firmware: ti_sci: Add support for NAVSS resource management

Texas Instruments' System Control Interface (TI-SCI) Message Protocol
abstracts management of NAVSS resources, like PSI-L pairing and
unpairing, UDMAP tx/rx/flow configuration and Rings.

This patch adds support for requesting and configuring such resources
from TI-SCI firmware.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>

2 files changed, 1391 insertions, 11 deletions

diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 91481260411..ec78a520e70 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -12,6 +12,7 @@
 #include <errno.h>
 #include <mailbox.h>
 #include <dm/device.h>
+#include <linux/compat.h>
 #include <linux/err.h>
 #include <linux/soc/ti/k3-sec-proxy.h>
 #include <linux/soc/ti/ti_sci_protocol.h>
@@ -32,15 +33,36 @@ struct ti_sci_xfer {
 };
 
 /**
+ * struct ti_sci_rm_type_map - Structure representing TISCI Resource
+ *				management representation of dev_ids.
+ * @dev_id:	TISCI device ID
+ * @type:	Corresponding id as identified by TISCI RM.
+ *
+ * Note: This is used only as a work around for using RM range apis
+ *	for AM654 SoC. For future SoCs dev_id will be used as type
+ *	for RM range APIs. In order to maintain ABI backward compatibility
+ *	type is not being changed for AM654 SoC.
+ */
+struct ti_sci_rm_type_map {
+	u32 dev_id;
+	u16 type;
+};
+
+/**
  * struct ti_sci_desc - Description of SoC integration
- * @host_id:		Host identifier representing the compute entity
- * @max_rx_timeout_us:	Timeout for communication with SoC (in Microseconds)
- * @max_msg_size:	Maximum size of data per message that can be handled.
+ * @default_host_id:	Host identifier representing the compute entity
+ * @max_rx_timeout_ms:	Timeout for communication with SoC (in Milliseconds)
+ * @max_msgs: Maximum number of messages that can be pending
+ *		  simultaneously in the system
+ * @max_msg_size: Maximum size of data per message that can be handled.
+ * @rm_type_map: RM resource type mapping structure.
  */
 struct ti_sci_desc {
-	u8 host_id;
-	int max_rx_timeout_us;
+	u8 default_host_id;
+	int max_rx_timeout_ms;
+	int max_msgs;
 	int max_msg_size;
+	struct ti_sci_rm_type_map *rm_type_map;
 };
 
 /**
@@ -136,7 +158,7 @@ static inline int ti_sci_get_response(struct ti_sci_info *info,
 	int ret;
 
 	/* Receive the response */
-	ret = mbox_recv(chan, msg, info->desc->max_rx_timeout_us);
+	ret = mbox_recv(chan, msg, info->desc->max_rx_timeout_ms);
 	if (ret) {
 		dev_err(info->dev, "%s: Message receive failed. ret = %d\n",
 			__func__, ret);
@@ -1441,6 +1463,147 @@ static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle)
 	return ret;
 }
 
+static int ti_sci_get_resource_type(struct ti_sci_info *info, u16 dev_id,
+				    u16 *type)
+{
+	struct ti_sci_rm_type_map *rm_type_map = info->desc->rm_type_map;
+	bool found = false;
+	int i;
+
+	/* If map is not provided then assume dev_id is used as type */
+	if (!rm_type_map) {
+		*type = dev_id;
+		return 0;
+	}
+
+	for (i = 0; rm_type_map[i].dev_id; i++) {
+		if (rm_type_map[i].dev_id == dev_id) {
+			*type = rm_type_map[i].type;
+			found = true;
+			break;
+		}
+	}
+
+	if (!found)
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * ti_sci_get_resource_range - Helper to get a range of resources assigned
+ *			       to a host. Resource is uniquely identified by
+ *			       type and subtype.
+ * @handle:		Pointer to TISCI handle.
+ * @dev_id:		TISCI device ID.
+ * @subtype:		Resource assignment subtype that is being requested
+ *			from the given device.
+ * @s_host:		Host processor ID to which the resources are allocated
+ * @range_start:	Start index of the resource range
+ * @range_num:		Number of resources in the range
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_get_resource_range(const struct ti_sci_handle *handle,
+				     u32 dev_id, u8 subtype, u8 s_host,
+				     u16 *range_start, u16 *range_num)
+{
+	struct ti_sci_msg_resp_get_resource_range *resp;
+	struct ti_sci_msg_req_get_resource_range req;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	u16 type;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_RESOURCE_RANGE,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+
+	ret = ti_sci_get_resource_type(info, dev_id, &type);
+	if (ret) {
+		dev_err(dev, "rm type lookup failed for %u\n", dev_id);
+		goto fail;
+	}
+
+	req.secondary_host = s_host;
+	req.type = type & MSG_RM_RESOURCE_TYPE_MASK;
+	req.subtype = subtype & MSG_RM_RESOURCE_SUBTYPE_MASK;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_resp_get_resource_range *)xfer->tx_message.buf;
+	if (!ti_sci_is_response_ack(resp)) {
+		ret = -ENODEV;
+	} else if (!resp->range_start && !resp->range_num) {
+		ret = -ENODEV;
+	} else {
+		*range_start = resp->range_start;
+		*range_num = resp->range_num;
+	};
+
+fail:
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_get_resource_range - Get a range of resources assigned to host
+ *				   that is same as ti sci interface host.
+ * @handle:		Pointer to TISCI handle.
+ * @dev_id:		TISCI device ID.
+ * @subtype:		Resource assignment subtype that is being requested
+ *			from the given device.
+ * @range_start:	Start index of the resource range
+ * @range_num:		Number of resources in the range
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_get_resource_range(const struct ti_sci_handle *handle,
+					 u32 dev_id, u8 subtype,
+					 u16 *range_start, u16 *range_num)
+{
+	return ti_sci_get_resource_range(handle, dev_id, subtype,
+					 TI_SCI_IRQ_SECONDARY_HOST_INVALID,
+					 range_start, range_num);
+}
+
+/**
+ * ti_sci_cmd_get_resource_range_from_shost - Get a range of resources
+ *					      assigned to a specified host.
+ * @handle:		Pointer to TISCI handle.
+ * @dev_id:		TISCI device ID.
+ * @subtype:		Resource assignment subtype that is being requested
+ *			from the given device.
+ * @s_host:		Host processor ID to which the resources are allocated
+ * @range_start:	Start index of the resource range
+ * @range_num:		Number of resources in the range
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static
+int ti_sci_cmd_get_resource_range_from_shost(const struct ti_sci_handle *handle,
+					     u32 dev_id, u8 subtype, u8 s_host,
+					     u16 *range_start, u16 *range_num)
+{
+	return ti_sci_get_resource_range(handle, dev_id, subtype, s_host,
+					 range_start, range_num);
+}
+
 /**
  * ti_sci_cmd_proc_request() - Command to request a physical processor control
  * @handle:	Pointer to TI SCI handle
@@ -1803,6 +1966,416 @@ static int ti_sci_cmd_get_proc_boot_status(const struct ti_sci_handle *handle,
 	return ret;
 }
 
+/**
+ * ti_sci_cmd_ring_config() - configure RA ring
+ * @handle:	pointer to TI SCI handle
+ * @valid_params: Bitfield defining validity of ring configuration parameters.
+ * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated
+ * @index: Ring index.
+ * @addr_lo: The ring base address lo 32 bits
+ * @addr_hi: The ring base address hi 32 bits
+ * @count: Number of ring elements.
+ * @mode: The mode of the ring
+ * @size: The ring element size.
+ * @order_id: Specifies the ring's bus order ID.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ *
+ * See @ti_sci_msg_rm_ring_cfg_req for more info.
+ */
+static int ti_sci_cmd_ring_config(const struct ti_sci_handle *handle,
+				  u32 valid_params, u16 nav_id, u16 index,
+				  u32 addr_lo, u32 addr_hi, u32 count,
+				  u8 mode, u8 size, u8 order_id)
+{
+	struct ti_sci_msg_rm_ring_cfg_resp *resp;
+	struct ti_sci_msg_rm_ring_cfg_req req;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_RM_RING_CFG,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "RM_RA:Message config failed(%d)\n", ret);
+		return ret;
+	}
+	req.valid_params = valid_params;
+	req.nav_id = nav_id;
+	req.index = index;
+	req.addr_lo = addr_lo;
+	req.addr_hi = addr_hi;
+	req.count = count;
+	req.mode = mode;
+	req.size = size;
+	req.order_id = order_id;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(info->dev, "RM_RA:Mbox config send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_rm_ring_cfg_resp *)xfer->tx_message.buf;
+
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	dev_dbg(info->dev, "RM_RA:config ring %u ret:%d\n", index, ret);
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_ring_get_config() - get RA ring configuration
+ * @handle:	pointer to TI SCI handle
+ * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated
+ * @index: Ring index.
+ * @addr_lo: returns ring's base address lo 32 bits
+ * @addr_hi: returns ring's base address hi 32 bits
+ * @count: returns number of ring elements.
+ * @mode: returns mode of the ring
+ * @size: returns ring element size.
+ * @order_id: returns ring's bus order ID.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ *
+ * See @ti_sci_msg_rm_ring_get_cfg_req for more info.
+ */
+static int ti_sci_cmd_ring_get_config(const struct ti_sci_handle *handle,
+				      u32 nav_id, u32 index, u8 *mode,
+				      u32 *addr_lo, u32 *addr_hi,
+				      u32 *count, u8 *size, u8 *order_id)
+{
+	struct ti_sci_msg_rm_ring_get_cfg_resp *resp;
+	struct ti_sci_msg_rm_ring_get_cfg_req req;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_RM_RING_GET_CFG,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev,
+			"RM_RA:Message get config failed(%d)\n", ret);
+		return ret;
+	}
+	req.nav_id = nav_id;
+	req.index = index;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(info->dev, "RM_RA:Mbox get config send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_rm_ring_get_cfg_resp *)xfer->tx_message.buf;
+
+	if (!ti_sci_is_response_ack(resp)) {
+		ret = -ENODEV;
+	} else {
+		if (mode)
+			*mode = resp->mode;
+		if (addr_lo)
+			*addr_lo = resp->addr_lo;
+		if (addr_hi)
+			*addr_hi = resp->addr_hi;
+		if (count)
+			*count = resp->count;
+		if (size)
+			*size = resp->size;
+		if (order_id)
+			*order_id = resp->order_id;
+	};
+
+fail:
+	dev_dbg(info->dev, "RM_RA:get config ring %u ret:%d\n", index, ret);
+	return ret;
+}
+
+static int ti_sci_cmd_rm_psil_pair(const struct ti_sci_handle *handle,
+				   u32 nav_id, u32 src_thread, u32 dst_thread)
+{
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_msg_psil_pair req;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_RM_PSIL_PAIR,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "RM_PSIL:Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req.nav_id = nav_id;
+	req.src_thread = src_thread;
+	req.dst_thread = dst_thread;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(info->dev, "RM_PSIL:Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	dev_dbg(info->dev, "RM_PSIL: nav: %u link pair %u->%u ret:%u\n",
+		nav_id, src_thread, dst_thread, ret);
+	return ret;
+}
+
+static int ti_sci_cmd_rm_psil_unpair(const struct ti_sci_handle *handle,
+				     u32 nav_id, u32 src_thread, u32 dst_thread)
+{
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_msg_psil_unpair req;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_RM_PSIL_UNPAIR,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "RM_PSIL:Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req.nav_id = nav_id;
+	req.src_thread = src_thread;
+	req.dst_thread = dst_thread;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(info->dev, "RM_PSIL:Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	dev_dbg(info->dev, "RM_PSIL: link unpair %u->%u ret:%u\n",
+		src_thread, dst_thread, ret);
+	return ret;
+}
+
+static int ti_sci_cmd_rm_udmap_tx_ch_cfg(
+			const struct ti_sci_handle *handle,
+			const struct ti_sci_msg_rm_udmap_tx_ch_cfg *params)
+{
+	struct ti_sci_msg_rm_udmap_tx_ch_cfg_resp *resp;
+	struct ti_sci_msg_rm_udmap_tx_ch_cfg_req req;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_RM_UDMAP_TX_CH_CFG,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "Message TX_CH_CFG alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req.valid_params = params->valid_params;
+	req.nav_id = params->nav_id;
+	req.index = params->index;
+	req.tx_pause_on_err = params->tx_pause_on_err;
+	req.tx_filt_einfo = params->tx_filt_einfo;
+	req.tx_filt_pswords = params->tx_filt_pswords;
+	req.tx_atype = params->tx_atype;
+	req.tx_chan_type = params->tx_chan_type;
+	req.tx_supr_tdpkt = params->tx_supr_tdpkt;
+	req.tx_fetch_size = params->tx_fetch_size;
+	req.tx_credit_count = params->tx_credit_count;
+	req.txcq_qnum = params->txcq_qnum;
+	req.tx_priority = params->tx_priority;
+	req.tx_qos = params->tx_qos;
+	req.tx_orderid = params->tx_orderid;
+	req.fdepth = params->fdepth;
+	req.tx_sched_priority = params->tx_sched_priority;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(info->dev, "Mbox send TX_CH_CFG fail %d\n", ret);
+		goto fail;
+	}
+
+	resp =
+	      (struct ti_sci_msg_rm_udmap_tx_ch_cfg_resp *)xfer->tx_message.buf;
+	ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
+
+fail:
+	dev_dbg(info->dev, "TX_CH_CFG: chn %u ret:%u\n", params->index, ret);
+	return ret;
+}
+
+static int ti_sci_cmd_rm_udmap_rx_ch_cfg(
+			const struct ti_sci_handle *handle,
+			const struct ti_sci_msg_rm_udmap_rx_ch_cfg *params)
+{
+	struct ti_sci_msg_rm_udmap_rx_ch_cfg_resp *resp;
+	struct ti_sci_msg_rm_udmap_rx_ch_cfg_req req;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_RM_UDMAP_RX_CH_CFG,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "Message RX_CH_CFG alloc failed(%d)\n", ret);
+		return ret;
+	}
+
+	req.valid_params = params->valid_params;
+	req.nav_id = params->nav_id;
+	req.index = params->index;
+	req.rx_fetch_size = params->rx_fetch_size;
+	req.rxcq_qnum = params->rxcq_qnum;
+	req.rx_priority = params->rx_priority;
+	req.rx_qos = params->rx_qos;
+	req.rx_orderid = params->rx_orderid;
+	req.rx_sched_priority = params->rx_sched_priority;
+	req.flowid_start = params->flowid_start;
+	req.flowid_cnt = params->flowid_cnt;
+	req.rx_pause_on_err = params->rx_pause_on_err;
+	req.rx_atype = params->rx_atype;
+	req.rx_chan_type = params->rx_chan_type;
+	req.rx_ignore_short = params->rx_ignore_short;
+	req.rx_ignore_long = params->rx_ignore_long;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(info->dev, "Mbox send RX_CH_CFG fail %d\n", ret);
+		goto fail;
+	}
+
+	resp =
+	      (struct ti_sci_msg_rm_udmap_rx_ch_cfg_resp *)xfer->tx_message.buf;
+	ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
+
+fail:
+	dev_dbg(info->dev, "RX_CH_CFG: chn %u ret:%d\n", params->index, ret);
+	return ret;
+}
+
+static int ti_sci_cmd_rm_udmap_rx_flow_cfg(
+			const struct ti_sci_handle *handle,
+			const struct ti_sci_msg_rm_udmap_flow_cfg *params)
+{
+	struct ti_sci_msg_rm_udmap_flow_cfg_resp *resp;
+	struct ti_sci_msg_rm_udmap_flow_cfg_req req;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_RM_UDMAP_FLOW_CFG,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "RX_FL_CFG: Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+
+	req.valid_params = params->valid_params;
+	req.nav_id = params->nav_id;
+	req.flow_index = params->flow_index;
+	req.rx_einfo_present = params->rx_einfo_present;
+	req.rx_psinfo_present = params->rx_psinfo_present;
+	req.rx_error_handling = params->rx_error_handling;
+	req.rx_desc_type = params->rx_desc_type;
+	req.rx_sop_offset = params->rx_sop_offset;
+	req.rx_dest_qnum = params->rx_dest_qnum;
+	req.rx_src_tag_hi = params->rx_src_tag_hi;
+	req.rx_src_tag_lo = params->rx_src_tag_lo;
+	req.rx_dest_tag_hi = params->rx_dest_tag_hi;
+	req.rx_dest_tag_lo = params->rx_dest_tag_lo;
+	req.rx_src_tag_hi_sel = params->rx_src_tag_hi_sel;
+	req.rx_src_tag_lo_sel = params->rx_src_tag_lo_sel;
+	req.rx_dest_tag_hi_sel = params->rx_dest_tag_hi_sel;
+	req.rx_dest_tag_lo_sel = params->rx_dest_tag_lo_sel;
+	req.rx_fdq0_sz0_qnum = params->rx_fdq0_sz0_qnum;
+	req.rx_fdq1_qnum = params->rx_fdq1_qnum;
+	req.rx_fdq2_qnum = params->rx_fdq2_qnum;
+	req.rx_fdq3_qnum = params->rx_fdq3_qnum;
+	req.rx_ps_location = params->rx_ps_location;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "RX_FL_CFG: Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp =
+	       (struct ti_sci_msg_rm_udmap_flow_cfg_resp *)xfer->tx_message.buf;
+	ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
+
+fail:
+	dev_dbg(info->dev, "RX_FL_CFG: %u ret:%d\n", params->flow_index, ret);
+	return ret;
+}
+
 /*
  * ti_sci_setup_ops() - Setup the operations structures
  * @info:	pointer to TISCI pointer
@@ -1814,7 +2387,11 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
 	struct ti_sci_dev_ops *dops = &ops->dev_ops;
 	struct ti_sci_clk_ops *cops = &ops->clk_ops;
 	struct ti_sci_core_ops *core_ops = &ops->core_ops;
+	struct ti_sci_rm_core_ops *rm_core_ops = &ops->rm_core_ops;
 	struct ti_sci_proc_ops *pops = &ops->proc_ops;
+	struct ti_sci_rm_ringacc_ops *rops = &ops->rm_ring_ops;
+	struct ti_sci_rm_psil_ops *psilops = &ops->rm_psil_ops;
+	struct ti_sci_rm_udmap_ops *udmap_ops = &ops->rm_udmap_ops;
 
 	bops->board_config = ti_sci_cmd_set_board_config;
 	bops->board_config_rm = ti_sci_cmd_set_board_config_rm;
@@ -1850,6 +2427,10 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
 
 	core_ops->reboot_device = ti_sci_cmd_core_reboot;
 
+	rm_core_ops->get_range = ti_sci_cmd_get_resource_range;
+	rm_core_ops->get_range_from_shost =
+		ti_sci_cmd_get_resource_range_from_shost;
+
 	pops->proc_request = ti_sci_cmd_proc_request;
 	pops->proc_release = ti_sci_cmd_proc_release;
 	pops->proc_handover = ti_sci_cmd_proc_handover;
@@ -1857,6 +2438,16 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
 	pops->set_proc_boot_ctrl = ti_sci_cmd_set_proc_boot_ctrl;
 	pops->proc_auth_boot_image = ti_sci_cmd_proc_auth_boot_image;
 	pops->get_proc_boot_status = ti_sci_cmd_get_proc_boot_status;
+
+	rops->config = ti_sci_cmd_ring_config;
+	rops->get_config = ti_sci_cmd_ring_get_config;
+
+	psilops->pair = ti_sci_cmd_rm_psil_pair;
+	psilops->unpair = ti_sci_cmd_rm_psil_unpair;
+
+	udmap_ops->tx_ch_cfg = ti_sci_cmd_rm_udmap_tx_ch_cfg;
+	udmap_ops->rx_ch_cfg = ti_sci_cmd_rm_udmap_rx_ch_cfg;
+	udmap_ops->rx_flow_cfg = ti_sci_cmd_rm_udmap_rx_flow_cfg;
 }
 
 /**
@@ -1969,7 +2560,7 @@ static int ti_sci_of_to_info(struct udevice *dev, struct ti_sci_info *info)
 	}
 
 	info->host_id = dev_read_u32_default(dev, "ti,host-id",
-					     info->desc->host_id);
+					     info->desc->default_host_id);
 
 	info->is_secure = dev_read_bool(dev, "ti,secure-host");
 
@@ -2009,17 +2600,164 @@ static int ti_sci_probe(struct udevice *dev)
 	return ret;
 }
 
+/*
+ * ti_sci_get_free_resource() - Get a free resource from TISCI resource.
+ * @res:	Pointer to the TISCI resource
+ *
+ * Return: resource num if all went ok else TI_SCI_RESOURCE_NULL.
+ */
+u16 ti_sci_get_free_resource(struct ti_sci_resource *res)
+{
+	u16 set, free_bit;
+
+	for (set = 0; set < res->sets; set++) {
+		free_bit = find_first_zero_bit(res->desc[set].res_map,
+					       res->desc[set].num);
+		if (free_bit != res->desc[set].num) {
+			set_bit(free_bit, res->desc[set].res_map);
+			return res->desc[set].start + free_bit;
+		}
+	}
+
+	return TI_SCI_RESOURCE_NULL;
+}
+
+/**
+ * ti_sci_release_resource() - Release a resource from TISCI resource.
+ * @res:	Pointer to the TISCI resource
+ */
+void ti_sci_release_resource(struct ti_sci_resource *res, u16 id)
+{
+	u16 set;
+
+	for (set = 0; set < res->sets; set++) {
+		if (res->desc[set].start <= id &&
+		    (res->desc[set].num + res->desc[set].start) > id)
+			clear_bit(id - res->desc[set].start,
+				  res->desc[set].res_map);
+	}
+}
+
+/**
+ * devm_ti_sci_get_of_resource() - Get a TISCI resource assigned to a device
+ * @handle:	TISCI handle
+ * @dev:	Device pointer to which the resource is assigned
+ * @of_prop:	property name by which the resource are represented
+ *
+ * Note: This function expects of_prop to be in the form of tuples
+ *	<type, subtype>. Allocates and initializes ti_sci_resource structure
+ *	for each of_prop. Client driver can directly call
+ *	ti_sci_(get_free, release)_resource apis for handling the resource.
+ *
+ * Return: Pointer to ti_sci_resource if all went well else appropriate
+ *	   error pointer.
+ */
+struct ti_sci_resource *
+devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
+			    struct udevice *dev, u32 dev_id, char *of_prop)
+{
+	u32 resource_subtype;
+	u16 resource_type;
+	struct ti_sci_resource *res;
+	int sets, i, ret;
+	u32 *temp;
+
+	res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL);
+	if (!res)
+		return ERR_PTR(-ENOMEM);
+
+	sets = dev_read_size(dev, of_prop);
+	if (sets < 0) {
+		dev_err(dev, "%s resource type ids not available\n", of_prop);
+		return ERR_PTR(sets);
+	}
+	temp = malloc(sets);
+	sets /= sizeof(u32);
+	res->sets = sets;
+
+	res->desc = devm_kcalloc(dev, res->sets, sizeof(*res->desc),
+				 GFP_KERNEL);
+	if (!res->desc)
+		return ERR_PTR(-ENOMEM);
+
+	ret = ti_sci_get_resource_type(handle_to_ti_sci_info(handle), dev_id,
+				       &resource_type);
+	if (ret) {
+		dev_err(dev, "No valid resource type for %u\n", dev_id);
+		return ERR_PTR(-EINVAL);
+	}
+
+	ret = dev_read_u32_array(dev, of_prop, temp, res->sets);
+	if (ret)
+		return ERR_PTR(-EINVAL);
+
+	for (i = 0; i < res->sets; i++) {
+		resource_subtype = temp[i];
+		ret = handle->ops.rm_core_ops.get_range(handle, dev_id,
+							resource_subtype,
+							&res->desc[i].start,
+							&res->desc[i].num);
+		if (ret) {
+			dev_err(dev, "type %d subtype %d not allocated for host %d\n",
+				resource_type, resource_subtype,
+				handle_to_ti_sci_info(handle)->host_id);
+			return ERR_PTR(ret);
+		}
+
+		dev_dbg(dev, "res type = %d, subtype = %d, start = %d, num = %d\n",
+			resource_type, resource_subtype, res->desc[i].start,
+			res->desc[i].num);
+
+		res->desc[i].res_map =
+			devm_kzalloc(dev, BITS_TO_LONGS(res->desc[i].num) *
+				     sizeof(*res->desc[i].res_map), GFP_KERNEL);
+		if (!res->desc[i].res_map)
+			return ERR_PTR(-ENOMEM);
+	}
+
+	return res;
+}
+
+/* Description for K2G */
+static const struct ti_sci_desc ti_sci_pmmc_k2g_desc = {
+	.default_host_id = 2,
+	/* Conservative duration */
+	.max_rx_timeout_ms = 10000,
+	/* Limited by MBOX_TX_QUEUE_LEN. K2G can handle upto 128 messages! */
+	.max_msgs = 20,
+	.max_msg_size = 64,
+	.rm_type_map = NULL,
+};
+
+static struct ti_sci_rm_type_map ti_sci_am654_rm_type_map[] = {
+	{.dev_id = 56, .type = 0x00b}, /* GIC_IRQ */
+	{.dev_id = 179, .type = 0x000}, /* MAIN_NAV_UDMASS_IA0 */
+	{.dev_id = 187, .type = 0x009}, /* MAIN_NAV_RA */
+	{.dev_id = 188, .type = 0x006}, /* MAIN_NAV_UDMAP */
+	{.dev_id = 194, .type = 0x007}, /* MCU_NAV_UDMAP */
+	{.dev_id = 195, .type = 0x00a}, /* MCU_NAV_RA */
+	{.dev_id = 0, .type = 0x000}, /* end of table */
+};
+
 /* Description for AM654 */
-static const struct ti_sci_desc ti_sci_sysfw_am654_desc = {
-	.host_id = 4,
-	.max_rx_timeout_us = 1000000,
+static const struct ti_sci_desc ti_sci_pmmc_am654_desc = {
+	.default_host_id = 12,
+	/* Conservative duration */
+	.max_rx_timeout_ms = 10000,
+	/* Limited by MBOX_TX_QUEUE_LEN. K2G can handle upto 128 messages! */
+	.max_msgs = 20,
 	.max_msg_size = 60,
+	.rm_type_map = ti_sci_am654_rm_type_map,
 };
 
 static const struct udevice_id ti_sci_ids[] = {
 	{
 		.compatible = "ti,k2g-sci",
-		.data = (ulong)&ti_sci_sysfw_am654_desc
+		.data = (ulong)&ti_sci_pmmc_k2g_desc
+	},
+	{
+		.compatible = "ti,am654-sci",
+		.data = (ulong)&ti_sci_pmmc_am654_desc
 	},
 	{ /* Sentinel */ },
 };
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
index 81591fb0c71..09984600992 100644
--- a/drivers/firmware/ti_sci.h
+++ b/drivers/firmware/ti_sci.h
@@ -50,6 +50,34 @@
 #define TISCI_MSG_PROC_AUTH_BOOT_IMIAGE	0xc120
 #define TISCI_MSG_GET_PROC_BOOT_STATUS	0xc400
 
+/* Resource Management Requests */
+#define TI_SCI_MSG_GET_RESOURCE_RANGE	0x1500
+
+/* NAVSS resource management */
+/* Ringacc requests */
+#define TI_SCI_MSG_RM_RING_CFG			0x1110
+#define TI_SCI_MSG_RM_RING_GET_CFG		0x1111
+
+/* PSI-L requests */
+#define TI_SCI_MSG_RM_PSIL_PAIR			0x1280
+#define TI_SCI_MSG_RM_PSIL_UNPAIR		0x1281
+
+#define TI_SCI_MSG_RM_UDMAP_TX_ALLOC		0x1200
+#define TI_SCI_MSG_RM_UDMAP_TX_FREE		0x1201
+#define TI_SCI_MSG_RM_UDMAP_RX_ALLOC		0x1210
+#define TI_SCI_MSG_RM_UDMAP_RX_FREE		0x1211
+#define TI_SCI_MSG_RM_UDMAP_FLOW_CFG		0x1220
+#define TI_SCI_MSG_RM_UDMAP_OPT_FLOW_CFG	0x1221
+
+#define TISCI_MSG_RM_UDMAP_TX_CH_CFG		0x1205
+#define TISCI_MSG_RM_UDMAP_TX_CH_GET_CFG	0x1206
+#define TISCI_MSG_RM_UDMAP_RX_CH_CFG		0x1215
+#define TISCI_MSG_RM_UDMAP_RX_CH_GET_CFG	0x1216
+#define TISCI_MSG_RM_UDMAP_FLOW_CFG		0x1230
+#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_CFG	0x1231
+#define TISCI_MSG_RM_UDMAP_FLOW_GET_CFG		0x1232
+#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_GET_CFG	0x1233
+
 /**
  * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses
  * @type:	Type of messages: One of TI_SCI_MSG* values
@@ -505,6 +533,45 @@ struct ti_sci_msg_resp_get_clock_freq {
 	u64 freq_hz;
 } __packed;
 
+#define TI_SCI_IRQ_SECONDARY_HOST_INVALID	0xff
+
+/**
+ * struct ti_sci_msg_req_get_resource_range - Request to get a host's assigned
+ *					      range of resources.
+ * @hdr:		Generic Header
+ * @type:		Unique resource assignment type
+ * @subtype:		Resource assignment subtype within the resource type.
+ * @secondary_host:	Host processing entity to which the resources are
+ *			allocated. This is required only when the destination
+ *			host id id different from ti sci interface host id,
+ *			else TI_SCI_IRQ_SECONDARY_HOST_INVALID can be passed.
+ *
+ * Request type is TI_SCI_MSG_GET_RESOURCE_RANGE. Responded with requested
+ * resource range which is of type TI_SCI_MSG_GET_RESOURCE_RANGE.
+ */
+struct ti_sci_msg_req_get_resource_range {
+	struct ti_sci_msg_hdr hdr;
+#define MSG_RM_RESOURCE_TYPE_MASK	GENMASK(9, 0)
+#define MSG_RM_RESOURCE_SUBTYPE_MASK	GENMASK(5, 0)
+	u16 type;
+	u8 subtype;
+	u8 secondary_host;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_resource_range - Response to resource get range.
+ * @hdr:		Generic Header
+ * @range_start:	Start index of the resource range.
+ * @range_num:		Number of resources in the range.
+ *
+ * Response to request TI_SCI_MSG_GET_RESOURCE_RANGE.
+ */
+struct ti_sci_msg_resp_get_resource_range {
+	struct ti_sci_msg_hdr hdr;
+	u16 range_start;
+	u16 range_num;
+} __packed;
+
 #define TISCI_ADDR_LOW_MASK		GENMASK_ULL(31, 0)
 #define TISCI_ADDR_HIGH_MASK		GENMASK_ULL(63, 32)
 #define TISCI_ADDR_HIGH_SHIFT		32
@@ -677,4 +744,579 @@ struct ti_sci_msg_resp_get_proc_boot_status {
 	u32 status_flags;
 } __packed;
 
+/**
+ * struct ti_sci_msg_rm_ring_cfg_req - Configure a Navigator Subsystem ring
+ *
+ * Configures the non-real-time registers of a Navigator Subsystem ring.
+ * @hdr:	Generic Header
+ * @valid_params: Bitfield defining validity of ring configuration parameters.
+ *	The ring configuration fields are not valid, and will not be used for
+ *	ring configuration, if their corresponding valid bit is zero.
+ *	Valid bit usage:
+ *	0 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_lo
+ *	1 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_hi
+ *	2 - Valid bit for @tisci_msg_rm_ring_cfg_req count
+ *	3 - Valid bit for @tisci_msg_rm_ring_cfg_req mode
+ *	4 - Valid bit for @tisci_msg_rm_ring_cfg_req size
+ *	5 - Valid bit for @tisci_msg_rm_ring_cfg_req order_id
+ * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated
+ * @index: ring index to be configured.
+ * @addr_lo: 32 LSBs of ring base address to be programmed into the ring's
+ *	RING_BA_LO register
+ * @addr_hi: 16 MSBs of ring base address to be programmed into the ring's
+ *	RING_BA_HI register.
+ * @count: Number of ring elements. Must be even if mode is CREDENTIALS or QM
+ *	modes.
+ * @mode: Specifies the mode the ring is to be configured.
+ * @size: Specifies encoded ring element size. To calculate the encoded size use
+ *	the formula (log2(size_bytes) - 2), where size_bytes cannot be
+ *	greater than 256.
+ * @order_id: Specifies the ring's bus order ID.
+ */
+struct ti_sci_msg_rm_ring_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u32 valid_params;
+	u16 nav_id;
+	u16 index;
+	u32 addr_lo;
+	u32 addr_hi;
+	u32 count;
+	u8 mode;
+	u8 size;
+	u8 order_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_rm_ring_cfg_resp - Response to configuring a ring.
+ *
+ * @hdr:	Generic Header
+ */
+struct ti_sci_msg_rm_ring_cfg_resp {
+	struct ti_sci_msg_hdr hdr;
+} __packed;
+
+/**
+ * struct ti_sci_msg_rm_ring_get_cfg_req - Get RA ring's configuration
+ *
+ * Gets the configuration of the non-real-time register fields of a ring.  The
+ * host, or a supervisor of the host, who owns the ring must be the requesting
+ * host.  The values of the non-real-time registers are returned in
+ * @ti_sci_msg_rm_ring_get_cfg_resp.
+ *
+ * @hdr: Generic Header
+ * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated
+ * @index: ring index.
+ */
+struct ti_sci_msg_rm_ring_get_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u16 nav_id;
+	u16 index;
+} __packed;
+
+/**
+ * struct ti_sci_msg_rm_ring_get_cfg_resp -  Ring get configuration response
+ *
+ * Response received by host processor after RM has handled
+ * @ti_sci_msg_rm_ring_get_cfg_req. The response contains the ring's
+ * non-real-time register values.
+ *
+ * @hdr: Generic Header
+ * @addr_lo: Ring 32 LSBs of base address
+ * @addr_hi: Ring 16 MSBs of base address.
+ * @count: Ring number of elements.
+ * @mode: Ring mode.
+ * @size: encoded Ring element size
+ * @order_id: ing order ID.
+ */
+struct ti_sci_msg_rm_ring_get_cfg_resp {
+	struct ti_sci_msg_hdr hdr;
+	u32 addr_lo;
+	u32 addr_hi;
+	u32 count;
+	u8 mode;
+	u8 size;
+	u8 order_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_psil_pair - Pairs a PSI-L source thread to a destination
+ *				 thread
+ * @hdr:	Generic Header
+ * @nav_id:	SoC Navigator Subsystem device ID whose PSI-L config proxy is
+ *		used to pair the source and destination threads.
+ * @src_thread:	PSI-L source thread ID within the PSI-L System thread map.
+ *
+ * UDMAP transmit channels mapped to source threads will have their
+ * TCHAN_THRD_ID register programmed with the destination thread if the pairing
+ * is successful.
+
+ * @dst_thread: PSI-L destination thread ID within the PSI-L System thread map.
+ * PSI-L destination threads start at index 0x8000.  The request is NACK'd if
+ * the destination thread is not greater than or equal to 0x8000.
+ *
+ * UDMAP receive channels mapped to destination threads will have their
+ * RCHAN_THRD_ID register programmed with the source thread if the pairing
+ * is successful.
+ *
+ * Request type is TI_SCI_MSG_RM_PSIL_PAIR, response is a generic ACK or NACK
+ * message.
+ */
+struct ti_sci_msg_psil_pair {
+	struct ti_sci_msg_hdr hdr;
+	u32 nav_id;
+	u32 src_thread;
+	u32 dst_thread;
+} __packed;
+
+/**
+ * struct ti_sci_msg_psil_unpair - Unpairs a PSI-L source thread from a
+ *				   destination thread
+ * @hdr:	Generic Header
+ * @nav_id:	SoC Navigator Subsystem device ID whose PSI-L config proxy is
+ *		used to unpair the source and destination threads.
+ * @src_thread:	PSI-L source thread ID within the PSI-L System thread map.
+ *
+ * UDMAP transmit channels mapped to source threads will have their
+ * TCHAN_THRD_ID register cleared if the unpairing is successful.
+ *
+ * @dst_thread: PSI-L destination thread ID within the PSI-L System thread map.
+ * PSI-L destination threads start at index 0x8000.  The request is NACK'd if
+ * the destination thread is not greater than or equal to 0x8000.
+ *
+ * UDMAP receive channels mapped to destination threads will have their
+ * RCHAN_THRD_ID register cleared if the unpairing is successful.
+ *
+ * Request type is TI_SCI_MSG_RM_PSIL_UNPAIR, response is a generic ACK or NACK
+ * message.
+ */
+struct ti_sci_msg_psil_unpair {
+	struct ti_sci_msg_hdr hdr;
+	u32 nav_id;
+	u32 src_thread;
+	u32 dst_thread;
+} __packed;
+
+/**
+ * Configures a Navigator Subsystem UDMAP transmit channel
+ *
+ * Configures the non-real-time registers of a Navigator Subsystem UDMAP
+ * transmit channel.  The channel index must be assigned to the host defined
+ * in the TISCI header via the RM board configuration resource assignment
+ * range list.
+ *
+ * @hdr: Generic Header
+ *
+ * @valid_params: Bitfield defining validity of tx channel configuration
+ * parameters. The tx channel configuration fields are not valid, and will not
+ * be used for ch configuration, if their corresponding valid bit is zero.
+ * Valid bit usage:
+ *    0 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_pause_on_err
+ *    1 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_atype
+ *    2 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_chan_type
+ *    3 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_fetch_size
+ *    4 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::txcq_qnum
+ *    5 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_priority
+ *    6 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_qos
+ *    7 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_orderid
+ *    8 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_sched_priority
+ *    9 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_einfo
+ *   10 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_pswords
+ *   11 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_supr_tdpkt
+ *   12 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_credit_count
+ *   13 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::fdepth
+ *
+ * @nav_id: SoC device ID of Navigator Subsystem where tx channel is located
+ *
+ * @index: UDMAP transmit channel index.
+ *
+ * @tx_pause_on_err: UDMAP transmit channel pause on error configuration to
+ * be programmed into the tx_pause_on_err field of the channel's TCHAN_TCFG
+ * register.
+ *
+ * @tx_filt_einfo: UDMAP transmit channel extended packet information passing
+ * configuration to be programmed into the tx_filt_einfo field of the
+ * channel's TCHAN_TCFG register.
+ *
+ * @tx_filt_pswords: UDMAP transmit channel protocol specific word passing
+ * configuration to be programmed into the tx_filt_pswords field of the
+ * channel's TCHAN_TCFG register.
+ *
+ * @tx_atype: UDMAP transmit channel non Ring Accelerator access pointer
+ * interpretation configuration to be programmed into the tx_atype field of
+ * the channel's TCHAN_TCFG register.
+ *
+ * @tx_chan_type: UDMAP transmit channel functional channel type and work
+ * passing mechanism configuration to be programmed into the tx_chan_type
+ * field of the channel's TCHAN_TCFG register.
+ *
+ * @tx_supr_tdpkt: UDMAP transmit channel teardown packet generation suppression
+ * configuration to be programmed into the tx_supr_tdpkt field of the channel's
+ * TCHAN_TCFG register.
+ *
+ * @tx_fetch_size: UDMAP transmit channel number of 32-bit descriptor words to
+ * fetch configuration to be programmed into the tx_fetch_size field of the
+ * channel's TCHAN_TCFG register.  The user must make sure to set the maximum
+ * word count that can pass through the channel for any allowed descriptor type.
+ *
+ * @tx_credit_count: UDMAP transmit channel transfer request credit count
+ * configuration to be programmed into the count field of the TCHAN_TCREDIT
+ * register.  Specifies how many credits for complete TRs are available.
+ *
+ * @txcq_qnum: UDMAP transmit channel completion queue configuration to be
+ * programmed into the txcq_qnum field of the TCHAN_TCQ register. The specified
+ * completion queue must be assigned to the host, or a subordinate of the host,
+ * requesting configuration of the transmit channel.
+ *
+ * @tx_priority: UDMAP transmit channel transmit priority value to be programmed
+ * into the priority field of the channel's TCHAN_TPRI_CTRL register.
+ *
+ * @tx_qos: UDMAP transmit channel transmit qos value to be programmed into the
+ * qos field of the channel's TCHAN_TPRI_CTRL register.
+ *
+ * @tx_orderid: UDMAP transmit channel bus order id value to be programmed into
+ * the orderid field of the channel's TCHAN_TPRI_CTRL register.
+ *
+ * @fdepth: UDMAP transmit channel FIFO depth configuration to be programmed
+ * into the fdepth field of the TCHAN_TFIFO_DEPTH register. Sets the number of
+ * Tx FIFO bytes which are allowed to be stored for the channel. Check the UDMAP
+ * section of the TRM for restrictions regarding this parameter.
+ *
+ * @tx_sched_priority: UDMAP transmit channel tx scheduling priority
+ * configuration to be programmed into the priority field of the channel's
+ * TCHAN_TST_SCHED register.
+ */
+struct ti_sci_msg_rm_udmap_tx_ch_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u32 valid_params;
+	u16 nav_id;
+	u16 index;
+	u8 tx_pause_on_err;
+	u8 tx_filt_einfo;
+	u8 tx_filt_pswords;
+	u8 tx_atype;
+	u8 tx_chan_type;
+	u8 tx_supr_tdpkt;
+	u16 tx_fetch_size;
+	u8 tx_credit_count;
+	u16 txcq_qnum;
+	u8 tx_priority;
+	u8 tx_qos;
+	u8 tx_orderid;
+	u16 fdepth;
+	u8 tx_sched_priority;
+} __packed;
+
+/**
+ *  Response to configuring a UDMAP transmit channel.
+ *
+ * @hdr: Standard TISCI header
+ */
+struct ti_sci_msg_rm_udmap_tx_ch_cfg_resp {
+	struct ti_sci_msg_hdr hdr;
+} __packed;
+
+/**
+ * Configures a Navigator Subsystem UDMAP receive channel
+ *
+ * Configures the non-real-time registers of a Navigator Subsystem UDMAP
+ * receive channel.  The channel index must be assigned to the host defined
+ * in the TISCI header via the RM board configuration resource assignment
+ * range list.
+ *
+ * @hdr: Generic Header
+ *
+ * @valid_params: Bitfield defining validity of rx channel configuration
+ * parameters.
+ * The rx channel configuration fields are not valid, and will not be used for
+ * ch configuration, if their corresponding valid bit is zero.
+ * Valid bit usage:
+ *    0 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_pause_on_err
+ *    1 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_atype
+ *    2 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_chan_type
+ *    3 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_fetch_size
+ *    4 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rxcq_qnum
+ *    5 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_priority
+ *    6 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_qos
+ *    7 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_orderid
+ *    8 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_sched_priority
+ *    9 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_start
+ *   10 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_cnt
+ *   11 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_short
+ *   12 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_long
+ *
+ * @nav_id: SoC device ID of Navigator Subsystem where rx channel is located
+ *
+ * @index: UDMAP receive channel index.
+ *
+ * @rx_fetch_size: UDMAP receive channel number of 32-bit descriptor words to
+ * fetch configuration to be programmed into the rx_fetch_size field of the
+ * channel's RCHAN_RCFG register.
+ *
+ * @rxcq_qnum: UDMAP receive channel completion queue configuration to be
+ * programmed into the rxcq_qnum field of the RCHAN_RCQ register.
+ * The specified completion queue must be assigned to the host, or a subordinate
+ * of the host, requesting configuration of the receive channel.
+ *
+ * @rx_priority: UDMAP receive channel receive priority value to be programmed
+ * into the priority field of the channel's RCHAN_RPRI_CTRL register.
+ *
+ * @rx_qos: UDMAP receive channel receive qos value to be programmed into the
+ * qos field of the channel's RCHAN_RPRI_CTRL register.
+ *
+ * @rx_orderid: UDMAP receive channel bus order id value to be programmed into
+ * the orderid field of the channel's RCHAN_RPRI_CTRL register.
+ *
+ * @rx_sched_priority: UDMAP receive channel rx scheduling priority
+ * configuration to be programmed into the priority field of the channel's
+ * RCHAN_RST_SCHED register.
+ *
+ * @flowid_start: UDMAP receive channel additional flows starting index
+ * configuration to program into the flow_start field of the RCHAN_RFLOW_RNG
+ * register. Specifies the starting index for flow IDs the receive channel is to
+ * make use of beyond the default flow. flowid_start and @ref flowid_cnt must be
+ * set as valid and configured together. The starting flow ID set by
+ * @ref flowid_cnt must be a flow index within the Navigator Subsystem's subset
+ * of flows beyond the default flows statically mapped to receive channels.
+ * The additional flows must be assigned to the host, or a subordinate of the
+ * host, requesting configuration of the receive channel.
+ *
+ * @flowid_cnt: UDMAP receive channel additional flows count configuration to
+ * program into the flowid_cnt field of the RCHAN_RFLOW_RNG register.
+ * This field specifies how many flow IDs are in the additional contiguous range
+ * of legal flow IDs for the channel.  @ref flowid_start and flowid_cnt must be
+ * set as valid and configured together. Disabling the valid_params field bit
+ * for flowid_cnt indicates no flow IDs other than the default are to be
+ * allocated and used by the receive channel. @ref flowid_start plus flowid_cnt
+ * cannot be greater than the number of receive flows in the receive channel's
+ * Navigator Subsystem.  The additional flows must be assigned to the host, or a
+ * subordinate of the host, requesting configuration of the receive channel.
+ *
+ * @rx_pause_on_err: UDMAP receive channel pause on error configuration to be
+ * programmed into the rx_pause_on_err field of the channel's RCHAN_RCFG
+ * register.
+ *
+ * @rx_atype: UDMAP receive channel non Ring Accelerator access pointer
+ * interpretation configuration to be programmed into the rx_atype field of the
+ * channel's RCHAN_RCFG register.
+ *
+ * @rx_chan_type: UDMAP receive channel functional channel type and work passing
+ * mechanism configuration to be programmed into the rx_chan_type field of the
+ * channel's RCHAN_RCFG register.
+ *
+ * @rx_ignore_short: UDMAP receive channel short packet treatment configuration
+ * to be programmed into the rx_ignore_short field of the RCHAN_RCFG register.
+ *
+ * @rx_ignore_long: UDMAP receive channel long packet treatment configuration to
+ * be programmed into the rx_ignore_long field of the RCHAN_RCFG register.
+ */
+struct ti_sci_msg_rm_udmap_rx_ch_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u32 valid_params;
+	u16 nav_id;
+	u16 index;
+	u16 rx_fetch_size;
+	u16 rxcq_qnum;
+	u8 rx_priority;
+	u8 rx_qos;
+	u8 rx_orderid;
+	u8 rx_sched_priority;
+	u16 flowid_start;
+	u16 flowid_cnt;
+	u8 rx_pause_on_err;
+	u8 rx_atype;
+	u8 rx_chan_type;
+	u8 rx_ignore_short;
+	u8 rx_ignore_long;
+} __packed;
+
+/**
+ * Response to configuring a UDMAP receive channel.
+ *
+ * @hdr: Standard TISCI header
+ */
+struct ti_sci_msg_rm_udmap_rx_ch_cfg_resp {
+	struct ti_sci_msg_hdr hdr;
+} __packed;
+
+/**
+ * Configures a Navigator Subsystem UDMAP receive flow
+ *
+ * Configures a Navigator Subsystem UDMAP receive flow's registers.
+ * Configuration does not include the flow registers which handle size-based
+ * free descriptor queue routing.
+ *
+ * The flow index must be assigned to the host defined in the TISCI header via
+ * the RM board configuration resource assignment range list.
+ *
+ * @hdr: Standard TISCI header
+ *
+ * @valid_params
+ * Bitfield defining validity of rx flow configuration parameters.  The
+ * rx flow configuration fields are not valid, and will not be used for flow
+ * configuration, if their corresponding valid bit is zero.  Valid bit usage:
+ *     0 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_einfo_present
+ *     1 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_psinfo_present
+ *     2 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_error_handling
+ *     3 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_desc_type
+ *     4 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_sop_offset
+ *     5 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_qnum
+ *     6 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi
+ *     7 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo
+ *     8 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi
+ *     9 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo
+ *    10 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi_sel
+ *    11 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo_sel
+ *    12 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi_sel
+ *    13 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo_sel
+ *    14 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq0_sz0_qnum
+ *    15 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq1_sz0_qnum
+ *    16 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq2_sz0_qnum
+ *    17 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq3_sz0_qnum
+ *    18 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_ps_location
+ *
+ * @nav_id: SoC device ID of Navigator Subsystem from which the receive flow is
+ * allocated
+ *
+ * @flow_index: UDMAP receive flow index for non-optional configuration.
+ *
+ * @rx_einfo_present:
+ * UDMAP receive flow extended packet info present configuration to be
+ * programmed into the rx_einfo_present field of the flow's RFLOW_RFA register.
+ *
+ * @rx_psinfo_present:
+ * UDMAP receive flow PS words present configuration to be programmed into the
+ * rx_psinfo_present field of the flow's RFLOW_RFA register.
+ *
+ * @rx_error_handling:
+ * UDMAP receive flow error handling configuration to be programmed into the
+ * rx_error_handling field of the flow's RFLOW_RFA register.
+ *
+ * @rx_desc_type:
+ * UDMAP receive flow descriptor type configuration to be programmed into the
+ * rx_desc_type field field of the flow's RFLOW_RFA register.
+ *
+ * @rx_sop_offset:
+ * UDMAP receive flow start of packet offset configuration to be programmed
+ * into the rx_sop_offset field of the RFLOW_RFA register.  See the UDMAP
+ * section of the TRM for more information on this setting.  Valid values for
+ * this field are 0-255 bytes.
+ *
+ * @rx_dest_qnum:
+ * UDMAP receive flow destination queue configuration to be programmed into the
+ * rx_dest_qnum field of the flow's RFLOW_RFA register.  The specified
+ * destination queue must be valid within the Navigator Subsystem and must be
+ * owned by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_src_tag_hi:
+ * UDMAP receive flow source tag high byte constant configuration to be
+ * programmed into the rx_src_tag_hi field of the flow's RFLOW_RFB register.
+ * See the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_src_tag_lo:
+ * UDMAP receive flow source tag low byte constant configuration to be
+ * programmed into the rx_src_tag_lo field of the flow's RFLOW_RFB register.
+ * See the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_dest_tag_hi:
+ * UDMAP receive flow destination tag high byte constant configuration to be
+ * programmed into the rx_dest_tag_hi field of the flow's RFLOW_RFB register.
+ * See the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_dest_tag_lo:
+ * UDMAP receive flow destination tag low byte constant configuration to be
+ * programmed into the rx_dest_tag_lo field of the flow's RFLOW_RFB register.
+ * See the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_src_tag_hi_sel:
+ * UDMAP receive flow source tag high byte selector configuration to be
+ * programmed into the rx_src_tag_hi_sel field of the RFLOW_RFC register.  See
+ * the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_src_tag_lo_sel:
+ * UDMAP receive flow source tag low byte selector configuration to be
+ * programmed into the rx_src_tag_lo_sel field of the RFLOW_RFC register.  See
+ * the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_dest_tag_hi_sel:
+ * UDMAP receive flow destination tag high byte selector configuration to be
+ * programmed into the rx_dest_tag_hi_sel field of the RFLOW_RFC register.  See
+ * the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_dest_tag_lo_sel:
+ * UDMAP receive flow destination tag low byte selector configuration to be
+ * programmed into the rx_dest_tag_lo_sel field of the RFLOW_RFC register.  See
+ * the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_fdq0_sz0_qnum:
+ * UDMAP receive flow free descriptor queue 0 configuration to be programmed
+ * into the rx_fdq0_sz0_qnum field of the flow's RFLOW_RFD register.  See the
+ * UDMAP section of the TRM for more information on this setting. The specified
+ * free queue must be valid within the Navigator Subsystem and must be owned
+ * by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_fdq1_qnum:
+ * UDMAP receive flow free descriptor queue 1 configuration to be programmed
+ * into the rx_fdq1_qnum field of the flow's RFLOW_RFD register.  See the
+ * UDMAP section of the TRM for more information on this setting.  The specified
+ * free queue must be valid within the Navigator Subsystem and must be owned
+ * by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_fdq2_qnum:
+ * UDMAP receive flow free descriptor queue 2 configuration to be programmed
+ * into the rx_fdq2_qnum field of the flow's RFLOW_RFE register.  See the
+ * UDMAP section of the TRM for more information on this setting.  The specified
+ * free queue must be valid within the Navigator Subsystem and must be owned
+ * by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_fdq3_qnum:
+ * UDMAP receive flow free descriptor queue 3 configuration to be programmed
+ * into the rx_fdq3_qnum field of the flow's RFLOW_RFE register.  See the
+ * UDMAP section of the TRM for more information on this setting.  The specified
+ * free queue must be valid within the Navigator Subsystem and must be owned
+ * by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_ps_location:
+ * UDMAP receive flow PS words location configuration to be programmed into the
+ * rx_ps_location field of the flow's RFLOW_RFA register.
+ */
+struct ti_sci_msg_rm_udmap_flow_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u32 valid_params;
+	u16 nav_id;
+	u16 flow_index;
+	u8 rx_einfo_present;
+	u8 rx_psinfo_present;
+	u8 rx_error_handling;
+	u8 rx_desc_type;
+	u16 rx_sop_offset;
+	u16 rx_dest_qnum;
+	u8 rx_src_tag_hi;
+	u8 rx_src_tag_lo;
+	u8 rx_dest_tag_hi;
+	u8 rx_dest_tag_lo;
+	u8 rx_src_tag_hi_sel;
+	u8 rx_src_tag_lo_sel;
+	u8 rx_dest_tag_hi_sel;
+	u8 rx_dest_tag_lo_sel;
+	u16 rx_fdq0_sz0_qnum;
+	u16 rx_fdq1_qnum;
+	u16 rx_fdq2_qnum;
+	u16 rx_fdq3_qnum;
+	u8 rx_ps_location;
+} __packed;
+
+/**
+ *  Response to configuring a Navigator Subsystem UDMAP receive flow
+ *
+ * @hdr: Standard TISCI header
+ */
+struct ti_sci_msg_rm_udmap_flow_cfg_resp {
+	struct ti_sci_msg_hdr hdr;
+} __packed;
+
 #endif /* __TI_SCI_H */