diff options
author | Tom Rini | 2022-12-04 10:03:57 -0500 |
---|---|---|
committer | Tom Rini | 2022-12-23 10:09:42 -0500 |
commit | 72fc26450493335ae191afdfcbbbb328b1df6b4d (patch) | |
tree | 0f1bd302e911b1d41aeb900ce2178066f0ae80c6 /drivers/fpga | |
parent | 452e33efa8c98c5fa3bb11d1a8b66966df253cdc (diff) |
global: Migrate CONFIG_FPGA_DELAY to CFG
Perform a simple rename of CONFIG_FPGA_DELAY to CFG_FPGA_DELAY
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'drivers/fpga')
-rw-r--r-- | drivers/fpga/ACEX1K.c | 22 | ||||
-rw-r--r-- | drivers/fpga/cyclon2.c | 12 | ||||
-rw-r--r-- | drivers/fpga/spartan2.c | 42 | ||||
-rw-r--r-- | drivers/fpga/spartan3.c | 42 | ||||
-rw-r--r-- | drivers/fpga/virtex2.c | 24 |
5 files changed, 71 insertions, 71 deletions
diff --git a/drivers/fpga/ACEX1K.c b/drivers/fpga/ACEX1K.c index ca49ee40a71..4c00cdf0b57 100644 --- a/drivers/fpga/ACEX1K.c +++ b/drivers/fpga/ACEX1K.c @@ -17,11 +17,11 @@ /* Note: The assumption is that we cannot possibly run fast enough to * overrun the device (the Slave Parallel mode can free run at 50MHz). - * If there is a need to operate slower, define CONFIG_FPGA_DELAY in + * If there is a need to operate slower, define CFG_FPGA_DELAY in * the board config file to slow things down. */ -#ifndef CONFIG_FPGA_DELAY -#define CONFIG_FPGA_DELAY() +#ifndef CFG_FPGA_DELAY +#define CFG_FPGA_DELAY() #endif #ifndef CFG_SYS_FPGA_WAIT @@ -137,7 +137,7 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize) /* Wait for nSTATUS to be released (i.e. deasserted) */ ts = get_timer (0); /* get current time */ do { - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for STATUS to go high.\n"); (*fn->abort) (cookie); @@ -147,7 +147,7 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize) } while ((*fn->status) (cookie)); /* Get ready for the burn */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); /* Load the data */ while (bytecount < bsize) { @@ -172,13 +172,13 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize) do { /* Deassert the clock */ (*fn->clk) (false, true, cookie); - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); /* Write data */ (*fn->data) ((val & 0x01), true, cookie); - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); /* Assert the clock */ (*fn->clk) (true, true, cookie); - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); val >>= 1; i --; } while (i > 0); @@ -189,7 +189,7 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize) #endif } - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK putc (' '); /* terminate the dotted line */ @@ -210,9 +210,9 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize) */ for (i = 0; i < 12; i++) { - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (true, true, cookie); /* Assert the clock pin */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ } diff --git a/drivers/fpga/cyclon2.c b/drivers/fpga/cyclon2.c index 3eed461e1e5..6e8a313db35 100644 --- a/drivers/fpga/cyclon2.c +++ b/drivers/fpga/cyclon2.c @@ -15,11 +15,11 @@ /* Note: The assumption is that we cannot possibly run fast enough to * overrun the device (the Slave Parallel mode can free run at 50MHz). - * If there is a need to operate slower, define CONFIG_FPGA_DELAY in + * If there is a need to operate slower, define CFG_FPGA_DELAY in * the board config file to slow things down. */ -#ifndef CONFIG_FPGA_DELAY -#define CONFIG_FPGA_DELAY() +#ifndef CFG_FPGA_DELAY +#define CFG_FPGA_DELAY() #endif #ifndef CFG_SYS_FPGA_WAIT @@ -129,7 +129,7 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize) /* Wait for nSTATUS to be asserted */ ts = get_timer(0); /* get current time */ do { - CONFIG_FPGA_DELAY(); + CFG_FPGA_DELAY(); if (get_timer(ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts("** Timeout waiting for STATUS to go high.\n"); @@ -139,7 +139,7 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize) } while (!(*fn->status) (cookie)); /* Get ready for the burn */ - CONFIG_FPGA_DELAY(); + CFG_FPGA_DELAY(); ret = (*fn->write) (buf, bsize, true, cookie); if (ret) { @@ -151,7 +151,7 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize) puts(" OK? ..."); #endif - CONFIG_FPGA_DELAY(); + CFG_FPGA_DELAY(); #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK putc(' '); /* terminate the dotted line */ diff --git a/drivers/fpga/spartan2.c b/drivers/fpga/spartan2.c index 68971d93470..6eef87b78e1 100644 --- a/drivers/fpga/spartan2.c +++ b/drivers/fpga/spartan2.c @@ -12,11 +12,11 @@ /* Note: The assumption is that we cannot possibly run fast enough to * overrun the device (the Slave Parallel mode can free run at 50MHz). - * If there is a need to operate slower, define CONFIG_FPGA_DELAY in + * If there is a need to operate slower, define CFG_FPGA_DELAY in * the board config file to slow things down. */ -#ifndef CONFIG_FPGA_DELAY -#define CONFIG_FPGA_DELAY() +#ifndef CFG_FPGA_DELAY +#define CFG_FPGA_DELAY() #endif #ifndef CFG_SYS_FPGA_WAIT @@ -140,13 +140,13 @@ static int spartan2_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) (*fn->pgm) (true, true, cookie); /* Assert the program, commit */ /* Get ready for the burn */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->pgm) (false, true, cookie); /* Deassert the program, commit */ ts = get_timer (0); /* get current time */ /* Now wait for INIT and BUSY to go high */ do { - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to clear.\n"); (*fn->abort) (cookie); /* abort the burn */ @@ -164,9 +164,9 @@ static int spartan2_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) /* XXX - Check the error bit? */ (*fn->wdata) (data[bytecount++], true, cookie); /* write the data */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (true, true, cookie); /* Assert the clock pin */ #ifdef CONFIG_SYS_FPGA_CHECK_BUSY @@ -175,9 +175,9 @@ static int spartan2_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) /* XXX - we should have a check in here somewhere to * make sure we aren't busy forever... */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (true, true, cookie); /* Assert the clock pin */ if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ @@ -194,7 +194,7 @@ static int spartan2_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) #endif } - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->cs) (false, true, cookie); /* Deassert the chip select */ (*fn->wr) (false, true, cookie); /* Deassert the write pin */ @@ -207,9 +207,9 @@ static int spartan2_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) ret_val = FPGA_SUCCESS; while ((*fn->done) (cookie) == FPGA_FAIL) { - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (true, true, cookie); /* Assert the clock pin */ if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ @@ -330,7 +330,7 @@ static int spartan2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) /* Wait for INIT state (init low) */ ts = get_timer (0); /* get current time */ do { - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to start.\n"); return FPGA_FAIL; @@ -338,13 +338,13 @@ static int spartan2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) } while (!(*fn->init) (cookie)); /* Get ready for the burn */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->pgm) (false, true, cookie); /* Deassert the program, commit */ ts = get_timer (0); /* get current time */ /* Now wait for INIT to go high */ do { - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to clear.\n"); return FPGA_FAIL; @@ -365,13 +365,13 @@ static int spartan2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) do { /* Deassert the clock */ (*fn->clk) (false, true, cookie); - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); /* Write data */ (*fn->wr) ((val & 0x80), true, cookie); - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); /* Assert the clock */ (*fn->clk) (true, true, cookie); - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); val <<= 1; i --; } while (i > 0); @@ -382,7 +382,7 @@ static int spartan2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) #endif } - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK putc ('\n'); /* terminate the dotted line */ @@ -395,9 +395,9 @@ static int spartan2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) while (! (*fn->done) (cookie)) { - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (true, true, cookie); /* Assert the clock pin */ putc ('*'); diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c index 1d5073cb59d..e892fa571f1 100644 --- a/drivers/fpga/spartan3.c +++ b/drivers/fpga/spartan3.c @@ -17,11 +17,11 @@ /* Note: The assumption is that we cannot possibly run fast enough to * overrun the device (the Slave Parallel mode can free run at 50MHz). - * If there is a need to operate slower, define CONFIG_FPGA_DELAY in + * If there is a need to operate slower, define CFG_FPGA_DELAY in * the board config file to slow things down. */ -#ifndef CONFIG_FPGA_DELAY -#define CONFIG_FPGA_DELAY() +#ifndef CFG_FPGA_DELAY +#define CFG_FPGA_DELAY() #endif #ifndef CFG_SYS_FPGA_WAIT @@ -145,13 +145,13 @@ static int spartan3_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) (*fn->pgm) (true, true, cookie); /* Assert the program, commit */ /* Get ready for the burn */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->pgm) (false, true, cookie); /* Deassert the program, commit */ ts = get_timer (0); /* get current time */ /* Now wait for INIT and BUSY to go high */ do { - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to clear.\n"); (*fn->abort) (cookie); /* abort the burn */ @@ -169,9 +169,9 @@ static int spartan3_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) /* XXX - Check the error bit? */ (*fn->wdata) (data[bytecount++], true, cookie); /* write the data */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (true, true, cookie); /* Assert the clock pin */ #ifdef CONFIG_SYS_FPGA_CHECK_BUSY @@ -180,9 +180,9 @@ static int spartan3_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) /* XXX - we should have a check in here somewhere to * make sure we aren't busy forever... */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (true, true, cookie); /* Assert the clock pin */ if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ @@ -199,7 +199,7 @@ static int spartan3_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) #endif } - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->cs) (false, true, cookie); /* Deassert the chip select */ (*fn->wr) (false, true, cookie); /* Deassert the write pin */ @@ -214,9 +214,9 @@ static int spartan3_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) /* XXX - we should have a check in here somewhere to * make sure we aren't busy forever... */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (true, true, cookie); /* Assert the clock pin */ if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ @@ -337,7 +337,7 @@ static int spartan3_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) /* Wait for INIT state (init low) */ ts = get_timer (0); /* get current time */ do { - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to start.\n"); if (*fn->abort) @@ -347,13 +347,13 @@ static int spartan3_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) } while (!(*fn->init) (cookie)); /* Get ready for the burn */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->pgm) (false, true, cookie); /* Deassert the program, commit */ ts = get_timer (0); /* get current time */ /* Now wait for INIT to go high */ do { - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to clear.\n"); if (*fn->abort) @@ -381,13 +381,13 @@ static int spartan3_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) do { /* Deassert the clock */ (*fn->clk) (false, true, cookie); - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); /* Write data */ (*fn->wr) ((val & 0x80), true, cookie); - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); /* Assert the clock */ (*fn->clk) (true, true, cookie); - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); val <<= 1; i --; } while (i > 0); @@ -399,7 +399,7 @@ static int spartan3_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) } } - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK putc ('\n'); /* terminate the dotted line */ @@ -414,9 +414,9 @@ static int spartan3_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) /* XXX - we should have a check in here somewhere to * make sure we aren't busy forever... */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ - CONFIG_FPGA_DELAY (); + CFG_FPGA_DELAY (); (*fn->clk) (true, true, cookie); /* Assert the clock pin */ putc ('*'); diff --git a/drivers/fpga/virtex2.c b/drivers/fpga/virtex2.c index ed2a4163f6e..fc99a5f4831 100644 --- a/drivers/fpga/virtex2.c +++ b/drivers/fpga/virtex2.c @@ -22,13 +22,13 @@ /* * If the SelectMap interface can be overrun by the processor, enable - * CONFIG_SYS_FPGA_CHECK_BUSY and/or define CONFIG_FPGA_DELAY in the board + * CONFIG_SYS_FPGA_CHECK_BUSY and/or define CFG_FPGA_DELAY in the board * configuration file and add board-specific support for checking BUSY status. * By default, assume that the SelectMap interface cannot be overrun. */ -#ifndef CONFIG_FPGA_DELAY -#define CONFIG_FPGA_DELAY() +#ifndef CFG_FPGA_DELAY +#define CFG_FPGA_DELAY() #endif /* @@ -196,7 +196,7 @@ static int virtex2_slave_pre(xilinx_virtex2_slave_fns *fn, int cookie) } while (!(*fn->init)(cookie)); (*fn->pgm)(false, true, cookie); - CONFIG_FPGA_DELAY(); + CFG_FPGA_DELAY(); if (fn->clk) (*fn->clk)(true, true, cookie); @@ -205,7 +205,7 @@ static int virtex2_slave_pre(xilinx_virtex2_slave_fns *fn, int cookie) */ ts = get_timer(0); do { - CONFIG_FPGA_DELAY(); + CFG_FPGA_DELAY(); if (get_timer(ts) > CFG_SYS_FPGA_WAIT_INIT) { printf("%s:%d: ** Timeout after %d ticks waiting for INIT to deassert.\n", __func__, __LINE__, CFG_SYS_FPGA_WAIT_INIT); @@ -233,7 +233,7 @@ static int virtex2_slave_post(xilinx_virtex2_slave_fns *fn, /* * Finished writing the data; deassert FPGA CS_B and WRITE_B signals. */ - CONFIG_FPGA_DELAY(); + CFG_FPGA_DELAY(); if (fn->cs) (*fn->cs)(false, true, cookie); if (fn->wr) @@ -269,9 +269,9 @@ static int virtex2_slave_post(xilinx_virtex2_slave_fns *fn, (*fn->wbulkdata)(&dummy, 1, true, cookie); } else { (*fn->wdata)(0xff, true, cookie); - CONFIG_FPGA_DELAY(); + CFG_FPGA_DELAY(); (*fn->clk)(false, true, cookie); - CONFIG_FPGA_DELAY(); + CFG_FPGA_DELAY(); (*fn->clk)(true, true, cookie); } } @@ -335,13 +335,13 @@ static int virtex2_ssm_load(xilinx_desc *desc, const void *buf, size_t bsize) #endif (*fn->wdata)(data[bytecount++], true, cookie); - CONFIG_FPGA_DELAY(); + CFG_FPGA_DELAY(); /* * Cycle the clock pin */ (*fn->clk)(false, true, cookie); - CONFIG_FPGA_DELAY(); + CFG_FPGA_DELAY(); (*fn->clk)(true, true, cookie); #ifdef CONFIG_SYS_FPGA_CHECK_BUSY @@ -472,9 +472,9 @@ static int virtex2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) for (bit = 7; bit >= 0; --bit) { unsigned char curr_bit = (curr_data >> bit) & 1; (*fn->wdata)(curr_bit, true, cookie); - CONFIG_FPGA_DELAY(); + CFG_FPGA_DELAY(); (*fn->clk)(false, true, cookie); - CONFIG_FPGA_DELAY(); + CFG_FPGA_DELAY(); (*fn->clk)(true, true, cookie); } |