gpio: add Tegra186 GPIO driver

Tegra186's GPIO controller register layout is significantly different from
previous chips, so add a new driver for it. In fact, there are two
different GPIO controllers in Tegra186 that share a similar register
layout, but very different port mapping. This driver covers both.

The DT binding is already present in the Linux kernel (in linux-next via
the Tegra tree so far).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org> # v1
Signed-off-by: Tom Warren <twarren@nvidia.com>

5 files changed, 358 insertions, 1 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index f7307442149..32219ed4788 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -116,6 +116,14 @@ config TEGRA_GPIO
 	  Support for the GPIO controller contained in NVIDIA Tegra20 through
 	  Tegra210.
 
+config TEGRA186_GPIO
+	bool "Tegra186 GPIO driver"
+	depends on DM_GPIO
+	help
+	  Support for the GPIO controller contained in NVIDIA Tegra186. This
+	  covers both the "main" and "AON" controller instances, even though
+	  they have slightly different register layout.
+
 config GPIO_UNIPHIER
 	bool "UniPhier GPIO"
 	depends on ARCH_UNIPHIER
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ddec1ef8dee..3c4310176d1 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_S5P)		+= s5p_gpio.o
 obj-$(CONFIG_SANDBOX_GPIO)	+= sandbox.o
 obj-$(CONFIG_SPEAR_GPIO)	+= spear_gpio.o
 obj-$(CONFIG_TEGRA_GPIO)	+= tegra_gpio.o
+obj-$(CONFIG_TEGRA186_GPIO)	+= tegra186_gpio.o
 obj-$(CONFIG_DA8XX_GPIO)	+= da8xx_gpio.o
 obj-$(CONFIG_DM644X_GPIO)	+= da8xx_gpio.o
 obj-$(CONFIG_ALTERA_PIO)	+= altera_pio.o
diff --git a/drivers/gpio/rk_gpio.c b/drivers/gpio/rk_gpio.c
index fefe3ca2035..64abcbaa0ac 100644
--- a/drivers/gpio/rk_gpio.c
+++ b/drivers/gpio/rk_gpio.c
@@ -8,7 +8,6 @@
  */
 
 #include <common.h>
-#include <clk.h>
 #include <dm.h>
 #include <syscon.h>
 #include <asm/errno.h>
diff --git a/drivers/gpio/tegra186_gpio.c b/drivers/gpio/tegra186_gpio.c
new file mode 100644
index 00000000000..1c681514db9
--- /dev/null
+++ b/drivers/gpio/tegra186_gpio.c
@@ -0,0 +1,288 @@
+/*
+ * Copyright (c) 2010-2016, NVIDIA CORPORATION.
+ * (based on tegra_gpio.c)
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <malloc.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
+#include <asm/gpio.h>
+#include <dm/device-internal.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "tegra186_gpio_priv.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct tegra186_gpio_port_data {
+	const char *name;
+	uint32_t offset;
+};
+
+struct tegra186_gpio_ctlr_data {
+	const struct tegra186_gpio_port_data *ports;
+	uint32_t port_count;
+};
+
+struct tegra186_gpio_platdata {
+	const char *name;
+	uint32_t *regs;
+};
+
+static uint32_t *tegra186_gpio_reg(struct udevice *dev, uint32_t reg,
+				   uint32_t gpio)
+{
+	struct tegra186_gpio_platdata *plat = dev->platdata;
+	uint32_t index = (reg + (gpio * TEGRA186_GPIO_PER_GPIO_STRIDE)) / 4;
+
+	return &(plat->regs[index]);
+}
+
+static int tegra186_gpio_set_out(struct udevice *dev, unsigned offset,
+				 bool output)
+{
+	uint32_t *reg;
+	uint32_t rval;
+
+	reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_OUTPUT_CONTROL, offset);
+	rval = readl(reg);
+	if (output)
+		rval &= ~TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED;
+	else
+		rval |= TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED;
+	writel(rval, reg);
+
+	reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_ENABLE_CONFIG, offset);
+	rval = readl(reg);
+	if (output)
+		rval |= TEGRA186_GPIO_ENABLE_CONFIG_OUT;
+	else
+		rval &= ~TEGRA186_GPIO_ENABLE_CONFIG_OUT;
+	rval |= TEGRA186_GPIO_ENABLE_CONFIG_ENABLE;
+	writel(rval, reg);
+
+	return 0;
+}
+
+static int tegra186_gpio_set_val(struct udevice *dev, unsigned offset, bool val)
+{
+	uint32_t *reg;
+	uint32_t rval;
+
+	reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_OUTPUT_VALUE, offset);
+	rval = readl(reg);
+	if (val)
+		rval |= TEGRA186_GPIO_OUTPUT_VALUE_HIGH;
+	else
+		rval &= ~TEGRA186_GPIO_OUTPUT_VALUE_HIGH;
+	writel(rval, reg);
+
+	return 0;
+}
+
+static int tegra186_gpio_direction_input(struct udevice *dev, unsigned offset)
+{
+	return tegra186_gpio_set_out(dev, offset, false);
+}
+
+static int tegra186_gpio_direction_output(struct udevice *dev, unsigned offset,
+				       int value)
+{
+	int ret;
+
+	ret = tegra186_gpio_set_val(dev, offset, value != 0);
+	if (ret)
+		return ret;
+	return tegra186_gpio_set_out(dev, offset, true);
+}
+
+static int tegra186_gpio_get_value(struct udevice *dev, unsigned offset)
+{
+	uint32_t *reg;
+	uint32_t rval;
+
+	reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_ENABLE_CONFIG, offset);
+	rval = readl(reg);
+
+	if (rval & TEGRA186_GPIO_ENABLE_CONFIG_OUT)
+		reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_OUTPUT_VALUE,
+					offset);
+	else
+		reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_INPUT, offset);
+
+	rval = readl(reg);
+	return !!rval;
+}
+
+static int tegra186_gpio_set_value(struct udevice *dev, unsigned offset,
+				   int value)
+{
+	return tegra186_gpio_set_val(dev, offset, value != 0);
+}
+
+static int tegra186_gpio_get_function(struct udevice *dev, unsigned offset)
+{
+	uint32_t *reg;
+	uint32_t rval;
+
+	reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_ENABLE_CONFIG, offset);
+	rval = readl(reg);
+	if (rval & TEGRA186_GPIO_ENABLE_CONFIG_OUT)
+		return GPIOF_OUTPUT;
+	else
+		return GPIOF_INPUT;
+}
+
+static int tegra186_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
+			    struct fdtdec_phandle_args *args)
+{
+	int gpio, port, ret;
+
+	gpio = args->args[0];
+	port = gpio / TEGRA186_GPIO_PER_GPIO_COUNT;
+	ret = device_get_child(dev, port, &desc->dev);
+	if (ret)
+		return ret;
+	desc->offset = gpio % TEGRA186_GPIO_PER_GPIO_COUNT;
+	desc->flags = args->args[1] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0;
+
+	return 0;
+}
+
+static const struct dm_gpio_ops tegra186_gpio_ops = {
+	.direction_input	= tegra186_gpio_direction_input,
+	.direction_output	= tegra186_gpio_direction_output,
+	.get_value		= tegra186_gpio_get_value,
+	.set_value		= tegra186_gpio_set_value,
+	.get_function		= tegra186_gpio_get_function,
+	.xlate			= tegra186_gpio_xlate,
+};
+
+/**
+ * We have a top-level GPIO device with no actual GPIOs. It has a child device
+ * for each port within the controller.
+ */
+static int tegra186_gpio_bind(struct udevice *parent)
+{
+	struct tegra186_gpio_platdata *parent_plat = parent->platdata;
+	struct tegra186_gpio_ctlr_data *ctlr_data =
+		(struct tegra186_gpio_ctlr_data *)dev_get_driver_data(parent);
+	uint32_t *regs;
+	int port, ret;
+
+	/* If this is a child device, there is nothing to do here */
+	if (parent_plat)
+		return 0;
+
+	regs = (uint32_t *)dev_get_addr_name(parent, "gpio");
+	if (regs == (uint32_t *)FDT_ADDR_T_NONE)
+		return -ENODEV;
+
+	for (port = 0; port < ctlr_data->port_count; port++) {
+		struct tegra186_gpio_platdata *plat;
+		struct udevice *dev;
+
+		plat = calloc(1, sizeof(*plat));
+		if (!plat)
+			return -ENOMEM;
+		plat->name = ctlr_data->ports[port].name;
+		plat->regs = &(regs[ctlr_data->ports[port].offset / 4]);
+
+		ret = device_bind(parent, parent->driver, plat->name, plat,
+				  -1, &dev);
+		if (ret)
+			return ret;
+		dev->of_offset = parent->of_offset;
+	}
+
+	return 0;
+}
+
+static int tegra186_gpio_probe(struct udevice *dev)
+{
+	struct tegra186_gpio_platdata *plat = dev->platdata;
+	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+	/* Only child devices have ports */
+	if (!plat)
+		return 0;
+
+	uc_priv->gpio_count = TEGRA186_GPIO_PER_GPIO_COUNT;
+	uc_priv->bank_name = plat->name;
+
+	return 0;
+}
+
+static const struct tegra186_gpio_port_data tegra186_gpio_main_ports[] = {
+	{"A",  0x2000},
+	{"B",  0x3000},
+	{"C",  0x3200},
+	{"D",  0x3400},
+	{"E",  0x2200},
+	{"F",  0x2400},
+	{"G",  0x4200},
+	{"H",  0x1000},
+	{"I",  0x0800},
+	{"J",  0x5000},
+	{"K",  0x5200},
+	{"L",  0x1200},
+	{"M",  0x5600},
+	{"N",  0x0000},
+	{"O",  0x0200},
+	{"P",  0x4000},
+	{"Q",  0x0400},
+	{"R",  0x0a00},
+	{"T",  0x0600},
+	{"X",  0x1400},
+	{"Y",  0x1600},
+	{"BB", 0x2600},
+	{"CC", 0x5400},
+};
+
+static const struct tegra186_gpio_ctlr_data tegra186_gpio_main_data = {
+	.ports = tegra186_gpio_main_ports,
+	.port_count = ARRAY_SIZE(tegra186_gpio_main_ports),
+};
+
+static const struct tegra186_gpio_port_data tegra186_gpio_aon_ports[] = {
+	{"S",  0x0200},
+	{"U",  0x0400},
+	{"V",  0x0800},
+	{"W",  0x0a00},
+	{"Z",  0x0e00},
+	{"AA", 0x0c00},
+	{"EE", 0x0600},
+	{"FF", 0x0000},
+};
+
+static const struct tegra186_gpio_ctlr_data tegra186_gpio_aon_data = {
+	.ports = tegra186_gpio_aon_ports,
+	.port_count = ARRAY_SIZE(tegra186_gpio_aon_ports),
+};
+
+static const struct udevice_id tegra186_gpio_ids[] = {
+	{
+		.compatible = "nvidia,tegra186-gpio",
+		.data = (ulong)&tegra186_gpio_main_data,
+	},
+	{
+		.compatible = "nvidia,tegra186-gpio-aon",
+		.data = (ulong)&tegra186_gpio_aon_data,
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(tegra186_gpio) = {
+	.name = "tegra186_gpio",
+	.id = UCLASS_GPIO,
+	.of_match = tegra186_gpio_ids,
+	.bind = tegra186_gpio_bind,
+	.probe = tegra186_gpio_probe,
+	.ops = &tegra186_gpio_ops,
+	.flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/gpio/tegra186_gpio_priv.h b/drivers/gpio/tegra186_gpio_priv.h
new file mode 100644
index 00000000000..9e85a4343b2
--- /dev/null
+++ b/drivers/gpio/tegra186_gpio_priv.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _TEGRA186_GPIO_PRIV_H_
+#define _TEGRA186_GPIO_PRIV_H_
+
+/*
+ * For each GPIO, there are a set of registers than affect it, all packed
+ * back-to-back.
+ */
+#define TEGRA186_GPIO_ENABLE_CONFIG				0x00
+#define TEGRA186_GPIO_ENABLE_CONFIG_ENABLE			BIT(0)
+#define TEGRA186_GPIO_ENABLE_CONFIG_OUT				BIT(1)
+#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SHIFT		2
+#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_MASK		3
+#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_NONE		0
+#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_LEVEL		1
+#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SINGLE_EDGE	2
+#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_DOUBLE_EDGE	3
+#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL_HIGH_RISING	BIT(4)
+#define TEGRA186_GPIO_ENABLE_CONFIG_DEBOUNCE_ENABLE		BIT(5)
+#define TEGRA186_GPIO_ENABLE_CONFIG_INTERRUPT_ENABLE		BIT(6)
+#define TEGRA186_GPIO_ENABLE_CONFIG_TIMESTAMPING_ENABLE		BIT(7)
+
+#define TEGRA186_GPIO_DEBOUNCE_THRESHOLD			0x04
+
+#define TEGRA186_GPIO_INPUT					0x08
+
+#define TEGRA186_GPIO_OUTPUT_CONTROL				0x0c
+#define TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED			BIT(0)
+
+#define TEGRA186_GPIO_OUTPUT_VALUE				0x10
+#define TEGRA186_GPIO_OUTPUT_VALUE_HIGH				1
+
+#define TEGRA186_GPIO_INTERRUPT_CLEAR				0x14
+
+/*
+ * 8 GPIOs are packed into a port. Their registers appear back-to-back in the
+ * port's address space.
+ */
+#define TEGRA186_GPIO_PER_GPIO_STRIDE				0x20
+#define TEGRA186_GPIO_PER_GPIO_COUNT				8
+
+/*
+ * Per-port registers are packed immediately following all of a port's
+ * per-GPIO registers.
+ */
+#define TEGRA186_GPIO_INTERRUPT_STATUS_G			0x100
+#define TEGRA186_GPIO_INTERRUPT_STATUS_G_STRIDE			4
+#define TEGRA186_GPIO_INTERRUPT_STATUS_G_COUNT			8
+
+/*
+ * The registers for multiple ports are packed together back-to-back to form
+ * the overall controller.
+ */
+#define TEGRA186_GPIO_PER_PORT_STRIDE				0x200
+
+#endif