powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x

There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

2 files changed, 1 insertions, 95 deletions

diff --git a/drivers/input/keyboard.c b/drivers/input/keyboard.c
index 7af5868dea7..84ee015cb33 100644
--- a/drivers/input/keyboard.c
+++ b/drivers/input/keyboard.c
@@ -20,7 +20,7 @@ static struct input_config config;
 
 static int kbd_read_keys(struct input_config *config)
 {
-#if defined(CONFIG_MPC5xxx) || defined(CONFIG_ARCH_MPC8540) || \
+#if defined(CONFIG_ARCH_MPC8540) || \
 		defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_ARCH_MPC8555)
 	/* no ISR is used, so received chars must be polled */
 	ps2ser_check();
diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c
index bcbe52af154..0b5ce06853e 100644
--- a/drivers/input/ps2ser.c
+++ b/drivers/input/ps2ser.c
@@ -29,25 +29,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define PS2SER_BAUD	57600
 
-#ifdef CONFIG_MPC5xxx
-#if CONFIG_PS2SERIAL == 1
-#define PSC_BASE MPC5XXX_PSC1
-#elif CONFIG_PS2SERIAL == 2
-#define PSC_BASE MPC5XXX_PSC2
-#elif CONFIG_PS2SERIAL == 3
-#define PSC_BASE MPC5XXX_PSC3
-#elif CONFIG_PS2SERIAL == 4
-#define PSC_BASE MPC5XXX_PSC4
-#elif CONFIG_PS2SERIAL == 5
-#define PSC_BASE MPC5XXX_PSC5
-#elif CONFIG_PS2SERIAL == 6
-#define PSC_BASE MPC5XXX_PSC6
-#else
-#error CONFIG_PS2SERIAL must be in 1 ... 6
-#endif
-
-#else
-
 #if CONFIG_PS2SERIAL == 1
 #define COM_BASE (CONFIG_SYS_CCSRBAR+0x4500)
 #elif CONFIG_PS2SERIAL == 2
@@ -56,8 +37,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #error CONFIG_PS2SERIAL must be in 1 ... 2
 #endif
 
-#endif /* CONFIG_MPC5xxx / other */
-
 static int	ps2ser_getc_hw(void);
 static void	ps2ser_interrupt(void *dev_id);
 
@@ -68,45 +47,6 @@ static atomic_t	ps2buf_cnt;
 static int	ps2buf_in_idx;
 static int	ps2buf_out_idx;
 
-#ifdef CONFIG_MPC5xxx
-int ps2ser_init(void)
-{
-	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-	unsigned long baseclk;
-	int div;
-
-	/* reset PSC */
-	psc->command = PSC_SEL_MODE_REG_1;
-
-	/* select clock sources */
-	psc->psc_clock_select = 0;
-	baseclk = (gd->arch.ipb_clk + 16) / 32;
-
-	/* switch to UART mode */
-	psc->sicr = 0;
-
-	/* configure parity, bit length and so on */
-	psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE;
-	psc->mode = PSC_MODE_ONE_STOP;
-
-	/* set up UART divisor */
-	div = (baseclk + (PS2SER_BAUD/2)) / PS2SER_BAUD;
-	psc->ctur = (div >> 8) & 0xff;
-	psc->ctlr = div & 0xff;
-
-	/* disable all interrupts */
-	psc->psc_imr = 0;
-
-	/* reset and enable Rx/Tx */
-	psc->command = PSC_RST_RX;
-	psc->command = PSC_RST_TX;
-	psc->command = PSC_RX_ENABLE | PSC_TX_ENABLE;
-
-	return (0);
-}
-
-#else
-
 int ps2ser_init(void)
 {
 	NS16550_t com_port = (NS16550_t)COM_BASE;
@@ -122,45 +62,23 @@ int ps2ser_init(void)
 	return (0);
 }
 
-#endif /* CONFIG_MPC5xxx / other */
-
 void ps2ser_putc(int chr)
 {
-#ifdef CONFIG_MPC5xxx
-	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#else
 	NS16550_t com_port = (NS16550_t)COM_BASE;
-#endif
 	debug(">>>> 0x%02x\n", chr);
 
-#ifdef CONFIG_MPC5xxx
-	while (!(psc->psc_status & PSC_SR_TXRDY));
-
-	psc->psc_buffer_8 = chr;
-#else
 	while ((com_port->lsr & UART_LSR_THRE) == 0);
 	com_port->thr = chr;
-#endif
 }
 
 static int ps2ser_getc_hw(void)
 {
-#ifdef CONFIG_MPC5xxx
-	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#else
 	NS16550_t com_port = (NS16550_t)COM_BASE;
-#endif
 	int res = -1;
 
-#ifdef CONFIG_MPC5xxx
-	if (psc->psc_status & PSC_SR_RXRDY) {
-		res = (psc->psc_buffer_8);
-	}
-#else
 	if (com_port->lsr & UART_LSR_DR) {
 		res = com_port->rbr;
 	}
-#endif
 
 	return res;
 }
@@ -206,21 +124,13 @@ int ps2ser_check(void)
 
 static void ps2ser_interrupt(void *dev_id)
 {
-#ifdef CONFIG_MPC5xxx
-	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#else
 	NS16550_t com_port = (NS16550_t)COM_BASE;
-#endif
 	int chr;
 	int status;
 
 	do {
 		chr = ps2ser_getc_hw();
-#ifdef CONFIG_MPC5xxx
-		status = psc->psc_status;
-#else
 		status = com_port->lsr;
-#endif
 		if (chr < 0) continue;
 
 		if (atomic_read(&ps2buf_cnt) < PS2BUF_SIZE) {
@@ -230,11 +140,7 @@ static void ps2ser_interrupt(void *dev_id)
 		} else {
 			printf ("ps2ser.c: buffer overflow\n");
 		}
-#ifdef CONFIG_MPC5xxx
-	} while (status & PSC_SR_RXRDY);
-#else
 	} while (status & UART_LSR_DR);
-#endif
 	if (atomic_read(&ps2buf_cnt)) {
 		ps2mult_callback(atomic_read(&ps2buf_cnt));
 	}