mmc: sdhci: move the ADMA2 table handling into own module

There are other (non-SDHCI) controllers which supports ADMA2 descriptor
tables, namely the Freescale eSDHC. Instead of copying the code, move it
into an own module.

Signed-off-by: Michael Walle <michael@walle.cc>

4 files changed, 87 insertions, 55 deletions

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 0c252e34c74..88582db58c9 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -46,6 +46,9 @@ config SPL_DM_MMC
 
 if MMC
 
+config MMC_SDHCI_ADMA_HELPERS
+	bool
+
 config MMC_SPI
 	bool "Support for SPI-based MMC controller"
 	depends on DM_MMC && DM_SPI
@@ -445,6 +448,7 @@ config MMC_SDHCI_SDMA
 config MMC_SDHCI_ADMA
 	bool "Support SDHCI ADMA2"
 	depends on MMC_SDHCI
+	select MMC_SDHCI_ADMA_HELPERS
 	help
 	  This enables support for the ADMA (Advanced DMA) defined
 	  in the SD Host Controller Standard Specification Version 3.00
@@ -452,6 +456,7 @@ config MMC_SDHCI_ADMA
 config SPL_MMC_SDHCI_ADMA
 	bool "Support SDHCI ADMA2 in SPL"
 	depends on MMC_SDHCI
+	select MMC_SDHCI_ADMA_HELPERS
 	help
 	  This enables support for the ADMA (Advanced DMA) defined
 	  in the SD Host Controller Standard Specification Version 3.00 in SPL.
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 22266ec8ece..1c849cbab2f 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -6,6 +6,7 @@
 obj-y += mmc.o
 obj-$(CONFIG_$(SPL_)DM_MMC) += mmc-uclass.o
 obj-$(CONFIG_$(SPL_)MMC_WRITE) += mmc_write.o
+obj-$(CONFIG_MMC_SDHCI_ADMA_HELPERS) += sdhci-adma.o
 
 ifndef CONFIG_$(SPL_)BLK
 obj-y += mmc_legacy.o
diff --git a/drivers/mmc/sdhci-adma.c b/drivers/mmc/sdhci-adma.c
new file mode 100644
index 00000000000..2ec057fbb19
--- /dev/null
+++ b/drivers/mmc/sdhci-adma.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SDHCI ADMA2 helper functions.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <sdhci.h>
+#include <malloc.h>
+#include <asm/cache.h>
+
+static void sdhci_adma_desc(struct sdhci_adma_desc *desc,
+			    dma_addr_t addr, u16 len, bool end)
+{
+	u8 attr;
+
+	attr = ADMA_DESC_ATTR_VALID | ADMA_DESC_TRANSFER_DATA;
+	if (end)
+		attr |= ADMA_DESC_ATTR_END;
+
+	desc->attr = attr;
+	desc->len = len;
+	desc->reserved = 0;
+	desc->addr_lo = lower_32_bits(addr);
+#ifdef CONFIG_DMA_ADDR_T_64BIT
+	desc->addr_hi = upper_32_bits(addr);
+#endif
+}
+
+/**
+ * sdhci_prepare_adma_table() - Populate the ADMA table
+ *
+ * @table:	Pointer to the ADMA table
+ * @data:	Pointer to MMC data
+ * @addr:	DMA address to write to or read from
+ *
+ * Fill the ADMA table according to the MMC data to read from or write to the
+ * given DMA address.
+ * Please note, that the table size depends on CONFIG_SYS_MMC_MAX_BLK_COUNT and
+ * we don't have to check for overflow.
+ */
+void sdhci_prepare_adma_table(struct sdhci_adma_desc *table,
+			      struct mmc_data *data, dma_addr_t addr)
+{
+	uint trans_bytes = data->blocksize * data->blocks;
+	uint desc_count = DIV_ROUND_UP(trans_bytes, ADMA_MAX_LEN);
+	struct sdhci_adma_desc *desc = table;
+	int i = desc_count;
+
+	while (--i) {
+		sdhci_adma_desc(desc, addr, ADMA_MAX_LEN, false);
+		addr += ADMA_MAX_LEN;
+		trans_bytes -= ADMA_MAX_LEN;
+		desc++;
+	}
+
+	sdhci_adma_desc(desc, addr, trans_bytes, true);
+
+	flush_cache((dma_addr_t)table,
+		    ROUND(desc_count * sizeof(struct sdhci_adma_desc),
+			  ARCH_DMA_MINALIGN));
+}
+
+/**
+ * sdhci_adma_init() - initialize the ADMA descriptor table
+ *
+ * @return pointer to the allocated descriptor table or NULL in case of an
+ * error.
+ */
+struct sdhci_adma_desc *sdhci_adma_init(void)
+{
+	return memalign(ARCH_DMA_MINALIGN, ADMA_TABLE_SZ);
+}
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 7673219fb33..d549a264d73 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -69,57 +69,6 @@ static void sdhci_transfer_pio(struct sdhci_host *host, struct mmc_data *data)
 	}
 }
 
-#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
-static void sdhci_adma_desc(struct sdhci_host *host, dma_addr_t dma_addr,
-			    u16 len, bool end)
-{
-	struct sdhci_adma_desc *desc;
-	u8 attr;
-
-	desc = &host->adma_desc_table[host->desc_slot];
-
-	attr = ADMA_DESC_ATTR_VALID | ADMA_DESC_TRANSFER_DATA;
-	if (!end)
-		host->desc_slot++;
-	else
-		attr |= ADMA_DESC_ATTR_END;
-
-	desc->attr = attr;
-	desc->len = len;
-	desc->reserved = 0;
-	desc->addr_lo = lower_32_bits(dma_addr);
-#ifdef CONFIG_DMA_ADDR_T_64BIT
-	desc->addr_hi = upper_32_bits(dma_addr);
-#endif
-}
-
-static void sdhci_prepare_adma_table(struct sdhci_host *host,
-				     struct mmc_data *data)
-{
-	uint trans_bytes = data->blocksize * data->blocks;
-	uint desc_count = DIV_ROUND_UP(trans_bytes, ADMA_MAX_LEN);
-	int i = desc_count;
-	dma_addr_t dma_addr = host->start_addr;
-
-	host->desc_slot = 0;
-
-	while (--i) {
-		sdhci_adma_desc(host, dma_addr, ADMA_MAX_LEN, false);
-		dma_addr += ADMA_MAX_LEN;
-		trans_bytes -= ADMA_MAX_LEN;
-	}
-
-	sdhci_adma_desc(host, dma_addr, trans_bytes, true);
-
-	flush_cache((dma_addr_t)host->adma_desc_table,
-		    ROUND(desc_count * sizeof(struct sdhci_adma_desc),
-			  ARCH_DMA_MINALIGN));
-}
-#elif defined(CONFIG_MMC_SDHCI_SDMA)
-static void sdhci_prepare_adma_table(struct sdhci_host *host,
-				     struct mmc_data *data)
-{}
-#endif
 #if (defined(CONFIG_MMC_SDHCI_SDMA) || CONFIG_IS_ENABLED(MMC_SDHCI_ADMA))
 static void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data,
 			      int *is_aligned, int trans_bytes)
@@ -156,8 +105,11 @@ static void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data,
 	if (host->flags & USE_SDMA) {
 		sdhci_writel(host, phys_to_bus((ulong)host->start_addr),
 				SDHCI_DMA_ADDRESS);
-	} else if (host->flags & (USE_ADMA | USE_ADMA64)) {
-		sdhci_prepare_adma_table(host, data);
+	}
+#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
+	else if (host->flags & (USE_ADMA | USE_ADMA64)) {
+		sdhci_prepare_adma_table(host->adma_desc_table, data,
+					 host->start_addr);
 
 		sdhci_writel(host, lower_32_bits(host->adma_addr),
 			     SDHCI_ADMA_ADDRESS);
@@ -165,6 +117,7 @@ static void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data,
 			sdhci_writel(host, upper_32_bits(host->adma_addr),
 				     SDHCI_ADMA_ADDRESS_HI);
 	}
+#endif
 }
 #else
 static void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data,
@@ -770,9 +723,9 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 		       __func__);
 		return -EINVAL;
 	}
-	host->adma_desc_table = memalign(ARCH_DMA_MINALIGN, ADMA_TABLE_SZ);
-
+	host->adma_desc_table = sdhci_adma_init();
 	host->adma_addr = (dma_addr_t)host->adma_desc_table;
+
 #ifdef CONFIG_DMA_ADDR_T_64BIT
 	host->flags |= USE_ADMA64;
 #else