diff options
author | Nuno Sá | 2023-05-11 13:19:50 +0200 |
---|---|---|
committer | Stefan Roese | 2023-05-15 10:00:30 +0200 |
commit | 43bacbe6ab85030a4dc424700f83108333e99536 (patch) | |
tree | f3df04cc0570326f3dd9bc9314a0e8c9bdf97165 /drivers/mtd/cfi_flash.c | |
parent | 177e506952a8ee34011590c4bd578d191fafb1ca (diff) |
mtd: cfi: respect reg address length
flash_get_size() will get the flash size from the device itself and go
through all erase regions to read protection status. However, the device
mappable region (eg: devicetree reg property) might be lower than the
device full size which means that the above cycle will result in a data
bus exception. This change fixes it by reading the 'addr_size' during
probe() and also use that as one possible upper limit.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Diffstat (limited to 'drivers/mtd/cfi_flash.c')
-rw-r--r-- | drivers/mtd/cfi_flash.c | 10 |
1 files changed, 9 insertions, 1 deletions
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index f378f6fb613..8ade7949a68 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -2196,6 +2196,12 @@ ulong flash_get_size(phys_addr_t base, int banknum) /* multiply the size by the number of chips */ info->size *= size_ratio; max_size = cfi_flash_bank_size(banknum); +#ifdef CONFIG_CFI_FLASH + if (max_size) + max_size = min((unsigned long)info->addr_size, max_size); + else + max_size = info->addr_size; +#endif if (max_size && info->size > max_size) { debug("[truncated from %ldMiB]", info->size >> 20); info->size = max_size; @@ -2492,15 +2498,17 @@ unsigned long flash_init(void) static int cfi_flash_probe(struct udevice *dev) { fdt_addr_t addr; + fdt_size_t size; int idx; for (idx = 0; idx < CFI_MAX_FLASH_BANKS; idx++) { - addr = dev_read_addr_index(dev, idx); + addr = dev_read_addr_size_index(dev, idx, &size); if (addr == FDT_ADDR_T_NONE) break; flash_info[cfi_flash_num_flash_banks].dev = dev; flash_info[cfi_flash_num_flash_banks].base = addr; + flash_info[cfi_flash_num_flash_banks].addr_size = size; cfi_flash_num_flash_banks++; } gd->bd->bi_flashstart = flash_info[0].base; |