aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
authorTakahiro Kuwano2023-04-23 01:55:49 +0200
committerJagan Teki2023-04-26 13:32:45 +0530
commit562d166a13ca88cb55ef4f4ddb016e27b7cb0d2e (patch)
treed9c259d0de1389e1e8624b91241e0f3498f55134 /drivers/mtd
parent8485595927e1685a8369426bda91b6a89dc2754c (diff)
mtd: spi-nor-core: Add fixups for s25fs512s
This patch adds fixups for s25fs512s to address the following issues from reading SFDP: - Non-uniform sectors by factory default. The setting needs to be checked and assign erase hook as needed. - Page size is wrongly advertised in SFDP. - READ_1_1_2 (3Bh/3Ch), READ_1_1_4 (6Bh/6Ch), and PP_1_1_4 (32h/34h) are not supported. - Bank Address Register (BAR) is not supported. In addition, volatile version of Quad Enable is used for safety. Based on patch by Takahiro Kuwano with s25fs_s_post_bfpt_fixup() updated to use 4-byte address commands instead of extended address mode and the page_size is fixed to 256 For future use, manufacturer code should be moved out from framework code as same as in Linux. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Cong Dang <cong.dang.xn@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/spi/spi-nor-core.c85
1 files changed, 85 insertions, 0 deletions
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index f963ed026cc..6093277f171 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -3229,6 +3229,87 @@ static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info,
/* Use ID byte 4 to distinguish S25FS256T and S25Hx-T */
#define S25FS256T_ID4 (0x08)
+/* Number of dummy cycle for Read Any Register (RDAR) op. */
+#define S25FS_S_RDAR_DUMMY 8
+
+static int s25fs_s_quad_enable(struct spi_nor *nor)
+{
+ return spansion_quad_enable_volatile(nor, 0, S25FS_S_RDAR_DUMMY);
+}
+
+static int s25fs_s_erase_non_uniform(struct spi_nor *nor, loff_t addr)
+{
+ /* Support 8 x 4KB sectors at bottom */
+ return spansion_erase_non_uniform(nor, addr, SPINOR_OP_BE_4K_4B, 0, SZ_32K);
+}
+
+static int s25fs_s_setup(struct spi_nor *nor, const struct flash_info *info,
+ const struct spi_nor_flash_parameter *params)
+{
+ int ret;
+ u8 cfr3v;
+
+ /* Bank Address Register is not supported */
+ if (CONFIG_IS_ENABLED(SPI_FLASH_BAR))
+ return -EOPNOTSUPP;
+
+ /*
+ * Read CR3V to check if uniform sector is selected. If not, assign an
+ * erase hook that supports non-uniform erase.
+ */
+ ret = spansion_read_any_reg(nor, SPINOR_REG_ADDR_CFR3V,
+ S25FS_S_RDAR_DUMMY, &cfr3v);
+ if (ret)
+ return ret;
+ if (!(cfr3v & CFR3V_UNHYSA))
+ nor->erase = s25fs_s_erase_non_uniform;
+
+ return spi_nor_default_setup(nor, info, params);
+}
+
+static void s25fs_s_default_init(struct spi_nor *nor)
+{
+ nor->setup = s25fs_s_setup;
+}
+
+static int s25fs_s_post_bfpt_fixup(struct spi_nor *nor,
+ const struct sfdp_parameter_header *header,
+ const struct sfdp_bfpt *bfpt,
+ struct spi_nor_flash_parameter *params)
+{
+ /* The erase size is set to 4K from BFPT, but it's wrong. Fix it. */
+ nor->erase_opcode = SPINOR_OP_SE;
+ nor->mtd.erasesize = nor->info->sector_size;
+
+ /* The S25FS-S chip family reports 512-byte pages in BFPT but
+ * in reality the write buffer still wraps at the safe default
+ * of 256 bytes. Overwrite the page size advertised by BFPT
+ * to get the writes working.
+ */
+ params->page_size = 256;
+
+ return 0;
+}
+
+static void s25fs_s_post_sfdp_fixup(struct spi_nor *nor,
+ struct spi_nor_flash_parameter *params)
+{
+ /* READ_1_1_2 is not supported */
+ params->hwcaps.mask &= ~SNOR_HWCAPS_READ_1_1_2;
+ /* READ_1_1_4 is not supported */
+ params->hwcaps.mask &= ~SNOR_HWCAPS_READ_1_1_4;
+ /* PP_1_1_4 is not supported */
+ params->hwcaps.mask &= ~SNOR_HWCAPS_PP_1_1_4;
+ /* Use volatile register to enable quad */
+ params->quad_enable = s25fs_s_quad_enable;
+}
+
+static struct spi_nor_fixups s25fs_s_fixups = {
+ .default_init = s25fs_s_default_init,
+ .post_bfpt = s25fs_s_post_bfpt_fixup,
+ .post_sfdp = s25fs_s_post_sfdp_fixup,
+};
+
static int s25_mdp_ready(struct spi_nor *nor)
{
u32 addr;
@@ -3927,6 +4008,10 @@ void spi_nor_set_fixups(struct spi_nor *nor)
if (CONFIG_IS_ENABLED(SPI_FLASH_BAR) &&
!strcmp(nor->info->name, "s25fl256l"))
nor->fixups = &s25fl256l_fixups;
+
+ /* For FS-S (family ID = 0x81) */
+ if (JEDEC_MFR(nor->info) == SNOR_MFR_SPANSION && nor->info->id[5] == 0x81)
+ nor->fixups = &s25fs_s_fixups;
#endif
#ifdef CONFIG_SPI_FLASH_MT35XU