diff options
| author | Vladimir Oltean | 2021-09-18 15:32:34 +0300 |
|---|---|---|
| committer | Ramon Fried | 2021-09-28 18:50:56 +0300 |
| commit | 77b11f7604162886f46e56011e790b7700f8cadd (patch) | |
| tree | ab58a658085e4b2db03f2e5a76ddec06fa59a259 /drivers/net/fsl_enetc.c | |
| parent | a17776be1dbe91684a9d0c60f623e9243e43fea9 (diff) | |
net: replace the "xfi" phy-mode with "10gbase-r"
As part of the effort of making U-Boot work with the same device tree as
Linux, there is an issue with the "xfi" phy-mode. To be precise, in
Linux there was a discussion (for those who have time to read:
https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/)
which led to a patch:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881
TL;DR: "xfi" was standardized in Linux as "10gbase-r".
This patch changes the relevant occurrences in U-Boot to use "10gbase-r"
instead of "xfi" wherever applicable.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Diffstat (limited to 'drivers/net/fsl_enetc.c')
| -rw-r--r-- | drivers/net/fsl_enetc.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/net/fsl_enetc.c b/drivers/net/fsl_enetc.c index 566cdc7e546..12d9942b65d 100644 --- a/drivers/net/fsl_enetc.c +++ b/drivers/net/fsl_enetc.c @@ -228,7 +228,7 @@ static void enetc_setup_mac_iface(struct udevice *dev, break; case PHY_INTERFACE_MODE_XGMII: case PHY_INTERFACE_MODE_USXGMII: - case PHY_INTERFACE_MODE_XFI: + case PHY_INTERFACE_MODE_10GBASER: /* set ifmode to (US)XGMII */ if_mode = enetc_read_port(priv, ENETC_PM_IF_MODE); if_mode &= ~ENETC_PM_IF_IFMODE_MASK; @@ -296,7 +296,7 @@ static void enetc_start_pcs(struct udevice *dev) break; case PHY_INTERFACE_MODE_XGMII: case PHY_INTERFACE_MODE_USXGMII: - case PHY_INTERFACE_MODE_XFI: + case PHY_INTERFACE_MODE_10GBASER: enetc_init_sxgmii(dev); break; }; |