spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode

Now, spi_flash_probe_bus_cs() relies on DT for spi speed and mode
and logically calls spi_get_bus_and_cs(). In case spi mode and speed are
not read from DT, make usage of spi_flash_probe() instead.

To sum-up:
 - Previous call tree was:
    spi_flash_probe() -> spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()

 - Current call tree is:
    spi_flash_probe() -> _spi_get_bus_and_cs()
    spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()

This patch impacts the following :
  - cmd/sf.c: if spi mode and/or speed is passed in argument of
    do_spi_flash_probe(), call spi_flash_probe() otherwise call
    spi_flash_probe_bus_cs().

  - drivers/net/fm/fm.c: as by default spi speed and mode was set to
    0 and a comment indicates that speed and mode are read from DT,
    use spi_flash_probe_bus_cs().

  - drivers/net/pfe_eth/pfe_firmware.c: spi speed and mode are not read
    from DT by all platforms using this driver, so keep legacy and replace
    spi_flash_probe_bus_cs() by spi_flash_probe();

  - drivers/net/sni_netsec.c : spi speed and mode are not read from DT,
    so replace spi_flash_probe_bus_cs() by spi_flash_probe().

  - drivers/usb/gadget/max3420_udc.c: Can't find any platform which make
    usage of this driver, nevertheless, keep legacy and replace
    spi_get_bus_and_cs() by _spi_get_bus_and_cs().

  - env/sf.c: a comment indicates that speed and mode are read
    from DT. So use spi_flash_probe_bus_cs().

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Cc: Marek Behun <marek.behun@nic.cz>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Anji J <anji.jagarlmudi@nxp.com>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

3 files changed, 8 insertions, 21 deletions

diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
index f8256126405..d0b492b5a1b 100644
--- a/drivers/net/fm/fm.c
+++ b/drivers/net/fm/fm.c
@@ -388,7 +388,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
 
 		/* speed and mode will be read from DT */
 		ret = spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS,
-					     CONFIG_SF_DEFAULT_CS, 0, 0, &new);
+					     CONFIG_SF_DEFAULT_CS, &new);
 
 		ucode_flash = dev_get_uclass_priv(new);
 #else
@@ -475,7 +475,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
 
 	/* speed and mode will be read from DT */
 	ret = spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
-				     0, 0, &new);
+				     &new);
 
 	ucode_flash = dev_get_uclass_priv(new);
 #else
diff --git a/drivers/net/pfe_eth/pfe_firmware.c b/drivers/net/pfe_eth/pfe_firmware.c
index 6669048181e..82a4aa89a4d 100644
--- a/drivers/net/pfe_eth/pfe_firmware.c
+++ b/drivers/net/pfe_eth/pfe_firmware.c
@@ -172,31 +172,20 @@ static int pfe_fit_check(void)
 int pfe_spi_flash_init(void)
 {
 	struct spi_flash *pfe_flash;
-	struct udevice *new;
 	int ret = 0;
 	void *addr = malloc(CONFIG_SYS_LS_PFE_FW_LENGTH);
 
 	if (!addr)
 		return -ENOMEM;
 
-	ret = spi_flash_probe_bus_cs(CONFIG_SYS_FSL_PFE_SPI_BUS,
-				     CONFIG_SYS_FSL_PFE_SPI_CS,
-				     CONFIG_SYS_FSL_PFE_SPI_MAX_HZ,
-				     CONFIG_SYS_FSL_PFE_SPI_MODE,
-				     &new);
-	if (ret) {
-		printf("SF: failed to probe spi\n");
-		free(addr);
-		device_remove(new, DM_REMOVE_NORMAL);
-		return ret;
-	}
-
+	pfe_flash = spi_flash_probe(CONFIG_SYS_FSL_PFE_SPI_BUS,
+				    CONFIG_SYS_FSL_PFE_SPI_CS,
+				    CONFIG_SYS_FSL_PFE_SPI_MAX_HZ,
+				    CONFIG_SYS_FSL_PFE_SPI_MODE);
 
-	pfe_flash = dev_get_uclass_priv(new);
 	if (!pfe_flash) {
 		printf("SF: probe for pfe failed\n");
 		free(addr);
-		device_remove(new, DM_REMOVE_NORMAL);
 		return -ENODEV;
 	}
 
diff --git a/drivers/net/sni_netsec.c b/drivers/net/sni_netsec.c
index 24caacf8470..9780f2092bd 100644
--- a/drivers/net/sni_netsec.c
+++ b/drivers/net/sni_netsec.c
@@ -621,12 +621,10 @@ static int netsec_stop_gmac(struct netsec_priv *priv)
 
 static void netsec_spi_read(char *buf, loff_t len, loff_t offset)
 {
-	struct udevice *new;
 	struct spi_flash *flash;
 
-	spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
-			       CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE, &new);
-	flash = dev_get_uclass_priv(new);
+	flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
+				CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE);
 
 	spi_flash_read(flash, offset, len, buf);
 }